Temperature sensor with RS485, -20 to +60°C, Modbus RTU interface, 14 bit resolution, cascade connection

Temperature sensor TST300V2 with RS485 interface
±0.13°C accuracy from +20°C to +60°C
14 bit resolution
2 x RJ45 for daisy chain connection to the next sensor
IP20 sealed housing
Low power consumption
Modbus address table: see TST300 manual
Log in to danbit.dk and press DOWNLOADS

MODBUS RTU interface

TST300
748.00 DKK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

TST300 is a precision temperature sensor with MODBUS RTU interface. The device does not need an external power supply. It is an excellent solution for precise temperature monitoring and control.
The temperature sensor integrates a band-gap temperature sensor element plus signal processing and provides a fully calibrated digital output. The temperature sensor is factory calibrated.
It focuses on applications that require precise temperature monitoring - server rooms, offices, food stores, etc. It is also suitable for smart office applications, as well as for data loggers and thermostats.
The temperature sensor provides high measurement accuracy as low as ± 0.13°C in the +20 to + 60°C range. It works with 12-bit precision from the digital-to-analog converter on board. The current consumption is lower than 5mA, while the supply voltage is from 4 to 5.5VDC.
The TST300 communicates with controllers via an RS-485 interface. Each sensor has a unique serial number, which enables several sensors to use the same RS-485 bus.
The digital temperature sensor uses two RJ45 connectors for an easy way to daisy chain to the next module. Standard UTP/FTP LAN cable can be used for interconnection between the sensors and the controller.

4 other products in the same category:

Temperature and humidity...

Temperature and humidity sensor with 1-wire interface for Teracom

Temperature and humidity sensor
1-wire interface for Teracom controller
Temperature: +/-0.4 °C (-10 to +60 °C), max. +/-0.6°C
Resolution: 0.1°C
Humidity: +/-3.0% RH (20 - 80% RH), max. +/-5% relative humidity
Solution: 0.1% RH
Supply voltage: 4.5 - 26VDC
LED indicator for communication status
Long-term stability based on digital signal processing
Changeable bit rate and other communication parameters
Firmware update via the interface
Size: 81 x 81 x 30 mm
Weight: 66g

Price 1,023.00 DKK
Product code: TSM400-1-TH
On the way in  
Quick view
CO2, humidity, and...

CO2, humidity, and temperature multi-sensor. MODBUS RTU RS485 Interface.

Multi sensor for CO2, Temperature and Humidity
Interface: RS485 - MODBUS RTU
LED indicator for status of communication
Long-term stability based on digital signal processing
Self-calibration on fresh air for CO2 measurements
Changeable communication parameters
Non-volatile memory for all settings
Firmware update via the interface
Size: 81 x 81 x 30 mm
Weight: 66g
Supply voltage: 4,5 - 26VDC / Max. 150mA

Price 2,046.00 DKK
Product code: TSM400-4-CPTH
On the way in  
Quick view
4 channel S0 pulse counter...

4 channel S0 pulse counter with RTU MODBUS, RS485, S0 Standard 62053-31, to Teracom data loggers

Remote collection of data, remote meter monitoring, energy management
Energy Meter Interface Module with MODBUS RTU
RS-485 interface with up to 63 units per BUS
Built-in 120 ohm termination resistor
Flash memory data and setup
Power supply from 5 to 32VDC, 25mA at 5VDC
Galvanic isolated digital input - 10mS pollinghastighed
Optional inputs: Open / Closed (dry contact and 32 bit counter)
S0 pulse counter applications :
Remote monitoring of electricity meters
Industrial process control
Remote monitoring of gas meters and water meters
monitoring devices with S0 outputs;
process monitoring
DIN rail mounting
Firmware update via interface.
Dim: 35 x 86 x 59 mm

Price 1,096.00 DKK
Product code: TDI340
Physically in stock  
Quick view
GSM alarm and remote...

GSM alarm and remote control, data logger, I/O with digital and analog, relay, Modbus, 12 - 24VDC. Only for 2G.

GSM-alarm - ONLT FOR 2G 
Setup via USB with Windows setup program, SMS and HTTP API
2 digital "dry contact" inputs
2 analog inputs, 0 - 10VDC - with resistance can be changed to input
2 mA analog inputs, 0 -10VDC or 0-20mA, 10bit (WEB control)
4 relay outputs, NO and NC
1-wire input for up to 8 Teracom sensors
RS485 interface for max. 8 MODBUS RTU sensors
data logger with memory for 70,000 logs
Upload data to HTTP Server
SMS alert to max. 5 recipients
Email alert for max. 5 receivers (SMTP with TLS support)
relay outputs with calls
12 to 24VDC, 350mA @ 12VDC - acquisitions PSU

Price 1,688.00 DKK
Product code: TCG140
Physically in stock  
Quick view