Temperature and humidity sensor with 1-wire interface for Teracom

Temperature and humidity sensor
1-wire interface for Teracom controller
Temperature: +/-0.4 °C (-10 to +60 °C), max. +/-0.6°C
Resolution: 0.1°C
Humidity: +/-3.0% RH (20 - 80% RH), max. +/-5% relative humidity
Solution: 0.1% RH
Supply voltage: 4.5 - 26VDC
LED indicator for communication status
Long-term stability based on digital signal processing
Changeable bit rate and other communication parameters
Firmware update via the interface
Size: 81 x 81 x 30 mm
Weight: 66g

TSM400-1-TH
1,023.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

The TSM400-1-TH is a humidity and temperature sensor that supports the MODBUS RTU protocol over the RS-485 interface. A unique capacitive element is used to measure relative humidity, while temperature is measured by a bandgap sensor. Both sensors are seamlessly connected to a 12-bit analog to digital converter. This results in superior signal quality. The TSM400-1-TH multisensor is housed in a slim plastic housing. The lower part of the cabinet is suitable for mounting on standard ø68mm built-in/cavity wall boxes, with installation openings of 61 mm.

4 other products in the same category:

1-wire temperature and...

1-wire temperature and humidity sensor, -20 - + 60 ° C, 10 - 90% RH, 1 meter cable

1-wire communications - several sensors can be connected to the same unit
± 3.0% relative humidity accuracy
± 0.4% relative temperature accuracy
12 bit resolution for humidity measurement
14 bit resolution for temperature measurement
Calibrated digital output
Eksellent long-term stability
Each sensor has its own unique 64-bit serial number

Price 625.00 DKK
Product code: TSH202
Physically in stock  
Quick view
Temperature sensor with...

Temperature sensor with RS485, -20 to +60°C, Modbus RTU interface, 14 bit resolution, cascade connection

Temperature sensor TST300V2 with RS485 interface
±0.13°C accuracy from +20°C to +60°C
14 bit resolution
2 x RJ45 for daisy chain connection to the next sensor
IP20 sealed housing
Low power consumption
Modbus address table: see TST300 manual
Log in to danbit.dk and press DOWNLOADS

MODBUS RTU interface

Price 748.00 DKK
Product code: TST300
Physically in stock  
Quick view
4 channel S0 pulse counter...

4 channel S0 pulse counter with RTU MODBUS, RS485, S0 Standard 62053-31, to Teracom data loggers

Remote collection of data, remote meter monitoring, energy management
Energy Meter Interface Module with MODBUS RTU
RS-485 interface with up to 63 units per BUS
Built-in 120 ohm termination resistor
Flash memory data and setup
Power supply from 5 to 32VDC, 25mA at 5VDC
Galvanic isolated digital input - 10mS pollinghastighed
Optional inputs: Open / Closed (dry contact and 32 bit counter)
S0 pulse counter applications :
Remote monitoring of electricity meters
Industrial process control
Remote monitoring of gas meters and water meters
monitoring devices with S0 outputs;
process monitoring
DIN rail mounting
Firmware update via interface.
Dim: 35 x 86 x 59 mm

Price 1,096.00 DKK
Product code: TDI340
On the way in  
Quick view