2.4GHz Omni directional antenna - dipole
for pipe montage
N-female connector
1 meter RG58 Coax cable
1 pc. RSMA - Male included
Weight: 1.4KG
Length: 45 cm
Diameter: 35mm
Freqency 433MHz Transmitting power 37dBm Receiving sensitivity -130 dBm Distance up to 20km Interface RS232/RS485 2 devices needed for single transparent transmission Baud rate: 1200~115200, default: 9600 Power input: 8-24VDC Operating temperature: -40 to 85℃
Transparent Wireless RS232 or RS485 link with 2 pcs. Programmable with DIP- and Rotary switches 433 MHz Radio Frequency 16 RF Channels 0dBi Omni antenna Baud Rates from 1200 to 115200 bps Includes a PA switch that can be used to enhance the RF power Wireless line of sight (LOS) transmission range of up to 500 meters at an RF Baud Rate of 9600 bps RS232 (RX/TX/GND) and RS485 (2-wire) interfaces N81, E81, O81 DIN-Rail Temperatures, -25 - +75°C TX power: 10dBm to 19dBm Supply: 10 - 30VDC / 1Watt Dim: 107 x 83 x 33 mm
Radio link for serial transfer on the 2.4GHz band
one for a (P2P) or one for more (P2M)
Range Up to 700 meters with whip-antenna
Range Improves panel antenna < Br> Serial port: RS232 or RS485
supply and COM port is with shed terminals
antenna: R/SMA female
Simple Setup with Turn and Dip Switche
2.4GHz, 16 channels
Supply 10 to 30 VDC
Wireless RS232 link between 2 RS232 ports. Only supplied as a set (2 pcs.). BT Ver 2.0+EDR, Class1 Up to 100 meters with included antennas at line-of-sight Up to 1km with larger external antennas (additional purchase) Automatic establishment of connection at power on With frequency hopping to avoid interference Baud rate: 1200 - 921.6kbps, 8 data bits, O/E/No, 1/2 stop bit Setting up Baud rate etc. with DIP switches RTS/CTS on/off - DTR/DSR/DCD loop-back Supports multi-connection: 1 master to 4 slaves Supply voltage: 5 - 12VDC/80mA
Bluetooth from PC to the adapter provides RS232 port External antenna. Bluetooth 2.0. With 2 pcs. as back-to-back link provides connection between 2 COM ports Wireless transfer of data between serial ports Up to 100 meters Antenna connector is RSMA female Setup via AT commands Must be powered from 5 - 40VDC via screw terminal USB mini cable to A male - for power from 5VDC 2 x screw terminal for any external power supply Is not battery-powered Use Putty for testing/setup Help with setup can be purchased additionally
Wireless Com Port - Can Peer-to-Peer connection
IEEE 802.11 a/b/g/n
2.4 GHz, 5 GHz Dual Band
1 Port RS232 or RS422 or 2-wire RS485
Max.Baud Rate: 921.6 Kbps
Operating temperature: -40 - +85°C
with COM Port Re-Director, TestView
± 15KV IEC ESD protection
Supply voltage: 5 - 12VDC / 2W
infrastructure, Soft AP, Roaming
sWifi config Mobile App for Android