Subcategories
There are 30 products.
125kHz RFID TAG
For Keyring
Waterproof
Durable
Gray
Dimensions: 40 x 30 x 7 (L x W x D)
RFID Reads 125khz Em-Marin
Em 4100
64 Bit Manchester Coding
10 digit ASCII
RS232 - Only TX and GND
Wiegand Interface
Reading distance: 0 - 20cm Depending Of tag
Supply voltage: 5 - 12VDC
Use liniar power supply (not switch mode)
interface cable from the back
IP67
Goal: 78 x 43 x 15 mm
125khz RFID reader for outdoor mounting on wall
sealed with hardened epoxy - cable mid rear
EM4000 125khz RFID Reader for wall mounting
reading distance 0 - 5cm, depending on roof size
40 bit code, 10 digits ASCII (Decimal)
RS232, only TX. GND
9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW
Wiegand 26bit format
LED Indicator and Buzzer Control Manager
Supply voltage: 12VDC / 200ma
Cable length 1 meter (8 Core)
Goal: 114 x 46 x 13 mm
RS485 Command Controllet Ready / Read
Set to Read. Called to Transfer Take UID Code
10 digit Hex - (26 digits for PC)
2-wire RS485 Half-duplex.
125 kHz EM format.
12vdc 0.2a (MDFollows not)
Dimensions: 113.5 x 45.6 mm (L X B)
Keyboard emulation: 8 decimal places (HID)
frequency: 125 kHz EM 4001/4002
Power supply: 5VDC from the USB port
Operating temperature: -10 - +75°C
Humidity during operation: waterproof
Reading range: 5 ~ 15 cm
Cable length: 164 cm
Dimension: 118 (L) × 75 (W) x 17 (H) mm
Weight: 250g ± 10%
wall mounting, water resistant
TAG, round piece, self-adhesive
1.7 x 25 mm
TAG is waterproof
TAG, cylinder, black
4.5 x 30 mm
TAG is waterproof
Take, credit card size 0.8mm.
Tags are waterproof
Tag, key ring
target: 35 x 2 x 4 mm
with engraved UID code
tag is waterproof
125kHz RFID TAG
credit card size 0.8 mm
sequential ID
TAG is waterproof
125kHz RFID TAG
Designed as screw
plastic
9.5 mm Thread
12 mm head
19 mm long.
TAG is waterproof
125 kHz RFID TAG
Dim: Ø25 x 3 mm
TAG is waterproof
125kHz TAG
rectangular, transparent plastic
Dim: 20 x 25 x 0.7 mm
TAG is waterproof
125kHz RFID TAG
For key ring
Dimensions: 37 x 30 x 8 mm
with printed UID code
TAG is waterproof
125kHz RFID TAG for adhesion
Dim: 20 x 3 mm
3M tape
black
TAG is waterproof
RFID 125kHz reader with RS232
EM 4xxx Standard Tag (40 bit HEX)
Mounting in Ø 31 mm Hole
Length from Resess: 27 mm
Resess Width: 40 mm
RS232 , 9600, N, 8, 1
9 - 12VDC / 50mA
Temperature: -10 - + 70 ° C
Material: PBC
IP54 from front
125kHz RFID TAG with screw hole
50 mm diameter x 2.5 mm
Suitable for guard rounding as a checkpoint
ASK 64 bits,
Manchester encoding; 10 digits in HEX
With RFID, the code reads Decimal: 12 digits
10/100M Ethernet interface
TCP Server, UDP, DHCP
Til 125Khz ID Kort
Forsyning: 5V DC PSU max 300MA
RFID reader for RS232 / RS485 / Wiegand
IP64
Range up to 60cm
Serial communication to / from PC
Relay output (24VDC / 2A) Serial Enabled from PC
Baud Rate : 9600, 8, n, 1
Dim: 210 x 210 x 28 mm
Extended temperature -10 - 60°C
supply: DC 12V, 350mA
RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)
