IP67 tight RJ45 cable connector with quick coupling

Fits chassis connector: STIK-RJ45-WAT-CPB

Install RJ45 patch cable with connector attached

Waterproof RJ45 connector
RJ45 female female connector (through connector)
For panel mounting
20mm thread
IP67 sealed
Gold plated connectors
UV protected and fireproof, for outdoor use
Suitable for industrial environment
Black plastic
Note: Mount RJ45 pcs without pull/bend relief - there is no space in the plug

Waterproof STP RJ45 set for chassis/panel and patch cable
Female through connector for panel/chassis mounting
Waterproof housing for patch cable with std. relief fitted.
Cable diameter: 5.5 to 7 mm
Hole size 25.7mm
IP67 sealed
UV protected and fireproof
For outdoor use
Suitable for industrial environment
Black

IP69K waterproof RJ45 connector for chassis mounting.
Anti-oxidation and anti-UV
Plastic housing: Technical thermoplastic. Fire protection according to UL 94V-0.
Contacts: Phosphor Bronze.
Surface treatment: Gold plating over nickel in contact.
Møttrik: Technical thermoplastic flammability class UL 94V-0
Gasket: silicone
Panel thickness: 1.5 ~ 2.5mm

Vandtæt plast-hus til RJ45 UTP kabel
Hus med snap-lås til RJ45 patch-kabel
Indsætningstab er maks. 0.7dB
Flammesikker: UL94-V0
IP67 tæt ned til 1.5 meter under vand
Til Ø24mm - chassis stik
Meget robust
Vandtæt hætte i kæde
PBT plastikhus

Cable connector for RJ45 chassis connector
For permanent installation of RJ45 cable in chassis connector.
Used for RJ45 patch cable with plug fitted

Waterproof chassis jack with RJ45 UTP F/F
Connector with RJ45 female on both sides
with flange mounting
Inserting loss is max. 0.7DB
Flame Safe: UL94-V0
IP67 down to 1.5 meters under water
for Ø24mm - Flange 30 x 31 mm
with Snap lock
with waterproof hood in chain
PBT plastic house

Waterproof Cable Housing for RJ45 - Fits the RJ45W chassis connector

Waterproof cap for RJ45W chassis connector with bayonet

RJ45 female connector for chassis mounting
Thread: (13/16"-UNEF28)
RJ45 pass-through connector 2 x RJ45 female STP
IP68 tight with waterproof cap attached - RJ45W-P - purchased separately
IP68 tight with waterproof housing with cable attached - RJ45W-S - purchased separately

IP65 waterproof and dustproof RJ45 connector (female)
up to 1000V and 1.5A
Push/pull locking system
UL certified
Operating temperature: -40°c~80°c
Certificates: CE, ROHS, CCC, ISO9001: 2008 Standard.
Anti vibration
Dimensions: 71 mm x 22.5 mm
Diameter: 5.5-7mm
Contact resistance: <30mOhm
Insulation resistance > 500MOhm
Material: Zinc alloy

Cable: 26-24 AWG

CAT5e and CAT6 (1000BaseT) Ethernet speed
Space and cost saving
IP68 rating
In accordance with IEC/EN 60950-22
Plastic: for anti UV light & UL 94V-0 for low flammability rating
Packing: excellent in tensile strength and elongation ability
10 cm (Special cable length can be ordered when ordering in volume)
Plastic housing: Engineering Thermoplastic, UL 746C (f1 grade)
Contact pins: Phosphor Bronze
Gasket: Silicone, UL50E/UL157 Multiple cable lengths Options RJ45 UTP female connector for chassis mounting.
10 cm UTP cable with RJ45 connector
Acquisition waterproof cap for female connector RJ45WP-P
Waterproof back
Thread: (13/16"-UNEF28)

Outdoor RJ45 coupler
RJ45 cables with bend relief:
It may be necessary to remove about 3mm of bend-relief
cables with extra shackle the trigger must often be removed
Page-wings at the release may have to be removed/minimized.
2 x RJ45 shielded she
IP68 waterproof
8PC8C

Waterproof hood with thread and strap
For RJ45WP-10FM
For RJ45WP-20FM
For RJ45WP-60FM
Thread (13/16"-UNEF28)

Chassis connector with built-in RJ45 female connector
20 cm cable with RJ45 male
Provides waterproof connection
Purchase RJ45WP-P cap when not in use.
Thread: (13/16"-UNEF28)

Waterproof RJ45 connector for 2 x screened RJ45 female connector, 8P8C at both ends
IP68 close to UV protected and fireproof, for outdoor use
Suitable for industrial environment
Til 3-8mm diameter cables
Black

Waterproof M25 RJ45 to PCB connector - adapter
For panel mounting
With printed circuit board for soldering
IP67 tight
UV protected for outdoor use
Suitable for industrial environment
Withstands shaking/vibration

RJ45 connector with 60 cm cable, IP68-tight
Thread: (13/16"-UNEF28)

Set consisting of chassis and connector part and cap
Plug for cable mounting
Cap to chassis: 3.1 cm (outer disc)
Threaded plug: 3.1 cm (outer disc), 2 cm (inner circle)
Waterproof - IP68 tight
28mm hole in chassis