CALL US NOW: +45 56 66 20 20
At DANBIT we have a wide selection of video extenders / amplifiers with several different types. See our categories within SDI, VGA, DVI and HDMI. We offer extenders running over fiber cables, network cables or a set of transmitter and receiver boxes. If in doubt, call our sales department so we can help you find the right solution.
KVM Remote Control over IP
HDMI, 1920x1080@60fps
Keyboard and Mouse Support
Remote OS Installation
Control via website
Wake On Lan
Virtual USB Mounting
80ms ~ 200ms delay
SD Card expansion
I/O Expansion
Power from USB-C port
Dimensions; 48.5 48.5 x 29 mm
Supports up to 1080p @ 60 Hz HDMI resolution
Extends HDMI signal up to 100 meters over coaxial cable
Built-in BNC loop-out for daisy chaining additional displays
DIP switches to configure video & audio modes (LPCM 2 / LPCM 7.1)
Input / output via HDMI Type A and coax BNC connectors
Power: DC 5V 2A supply; power consumption ~850 mA (TX), ~750 mA (RX)
Supports input via HDMI, DisplayPort, or USB-C (DP Alt-Mode)
Extends one selected input at 4K@30Hz (4:4:4) over network cabling
Up to 120 m over CAT5e, 140 m over CAT6
Daisy-chain capability to support up to 250 displays
Automatic / manual input switching plus one-button EDID management
Operating Temperature: 0 to 70℃
Power Supply: DC15V 2.6A (39W) / DC5V 3A(15W)
Controls via RS-232, I/O trigger, panel buttons
4K@60Hz (4:4:4) HDMI transmission over fiber
Up to 60 km single-mode or 300 m multimode distance
USB KVM, IR, RS232 control capability
Latency less than one video frame
Supports HDMI 2.0, HDCP 2.2, HDR, 3D
Power: 5 V DC, 2 A; maximum consumption ~5 W.
Operating temperature: -10 to 45 °C; storage: -30 to 70 °C.
Full audio support: LPCM 7.1, Dolby TrueHD, DTS-HD MA, ATMOS, DTS:X
4K@30Hz (4:4:4) video capability
Transmission distances: 120 m (CAT5e), 140 m (CAT6), 60 km (fiber)
Local HDMI loop-out on transmitter for nearby display
4 USB 2.0 ports at receiver end for remote peripherals
Bi-directional audio, IR & RS232 control support
Operating Temperature: 0 to 55℃
Power Supply: DC 5V 2A
EDID management & compatibility with IP repeater modules
Supports 4K@60Hz (4:4:4) video over IP
Extends up to 100 m via Cat5e / up to 60 km via fiber
USB KVM, RS232, bi-directional IR & audio support
Built-in HDMI loop-out for local display
Works over Ethernet switches for distribution, switching & routing
Operating Temperature: 0 to 55°C
Power Supply: 12V 1.5A
Advanced modes: video wall, sub-stream, hybrid resolution, image rotation
True 4K@60Hz (4:4:4) video with full-bandwidth HDMI over IP
Up to 100 m over Cat5e/6 or 60 km over single-mode fiber
PoE (Power over Ethernet) input (approx. 15W) removes need for separate power supply
Built-in HDMI loop-out at transmitter for local display monitoring
USB KVM + RS232 + bi-directional IR and embedded audio support
Operating Temperature: 0 to 55℃
Power Supply: TX: DC 12V 1.5A, RX: DC 12V 1.5A
Compatible with Ethernet switches for scalable distribution, video wall, matrix deployments
Delivers 4K@60Hz (4:4:4) over DisplayPort with HDCP 2.2 compliance
Fiber extension: up to 60 km with single-mode, 300 m with multi-mode
KVM functionality: USB for keyboard & mouse, full-duplex RS232, bi-directional IR (30-60 kHz)
DisplayPort input and output with SFP+ 10G module support
Robust design: operates from -10 °C to +45 °C, compact form-factor (~109.6 × 114.5 × 30 mm)
Low power usage: 5V-2A supply, ~5.5 W consumption, with reliability for long-distance transmission and remote control.
Supports up to 4K@30Hz (4:4:4) resolution
Transmission distance up to 1 km via single-mode fiber, 300 m via multimode fiber
Built-in LC fiber connector for simplicity and compatibility
EDID bypass ensures proper display and source device negotiation
Low latency plug-and-play design—dongle-style form factor with USB power
Operating Temperature: -20 to 70℃
Power Supply: TX: 5V 1.5A, RX: 5V 1.5A
LED status indicators for easy monitoring
Supports 4K@60Hz (4:4:4) resolution over CAT6 up to 100 m
Chainable receivers allow expansion to up to 250 displays
Local HDMI loop-out for source‐side monitoring
RS232 control and EDID management (four EDID modes)
Audio extraction for external speaker output
Power supply: TX: 5V 2A, RX: 5V 2A
Operating Temperature: 0-55℃
Works with both Ethernet switch-based distribution and daisy-chained receivers
Supports up to 4K@30Hz (4:4:4) resolution for crisp, clear video
Extends HDMI up to 120 m over CAT5e or 140 m over CAT6 cabling
HDMI loop-out for local display connection
Compatible with SR01X IP repeater for extended distance and flexibility
Works with Ethernet switches for signal distribution across multiple displays
Ideal for digital signage, classrooms, conference rooms, and retail AV setups
Supports True 4K@60Hz (4:4:4) video transmission up to 70 m over CAT5e
Power over HDBaseT (PoH) – power the system from either TX or RX
Bi-directional IR & RS232 control for remote management at both ends
CEC & EDID pass-through for seamless device compatibility
Extends 4K@60Hz up to 70 m, 1080p even further with higher-grade cabling
HDMI 2.0 & HDCP 2.2 compliant for modern AV and protected content
Operating Temperature: 0-55℃
Power Supply: TX: 12V 1.5A, RX: 12V 1.5A
Ideal for pro AV & signage.
True 4K@60Hz (4:4:4), HDMI 2.0 & HDCP 2.2 support
Signal extension up to 100 m over CAT5e/CAT6
HDMI loop-out at transmitter for local display
IR and RS232 control (bi-directional)
Analog audio pass-through
USB ports at receiver side for remote control devices
Power supply: TX: 5V 2A, RX: 5V 2A
Operating Temperature: 0-55℃
Perfect for pro AV, signage, control rooms and long cable runs.
Supports 4K@60Hz (4:4:4) video
Transmission distance: up to 70 m over CAT5e or greater
Dual HDMI outputs at receiver; loop-out on transmitter
IR & RS232 bi-directional control
HDMI 2.0 / HDCP 2.2 compliance
Full-bandwidth audio (7.1 LPCM, etc.)
Operating Temperature: 0-55℃
Power Supply: TX: 5V 2A, RX: 5V 2A
Extends 4K HDMI up to 70 m over CAT5e/6 with IR control.
Supports EDID & CEC pass-through, 1080p up to 70 m4K@30Hz over CAT5e/6 with support for 1080p up to 70 m
Bi-directional IR (selectable side)
EDID & CEC pass-through for compatibility and control
Supports multiple audio formats including 7.1 LPCM, Dolby TrueHD, DTS-HD MA.
Operating Temperature: 0-55℃
Power Supply: TX: 5V 1A, RX: 5V 1A
Perfect for signage, home theatre & AV systems.
Supports up to 4K@30Hz (4:4:4) over CAT5e/CAT6/ CAT6a/ CAT7
Transmits up to 100 m
EDID & CEC functionality
Supports multiple audio formats (7.1 LPCM, Dolby TrueHD, DTS-HD MA)
Compact, reliable design with low latency
Operating Temperature: 0-55℃
Power Supply: TX: 5V 2A, RX: 5V 2A
Perfect for simple HDMI runs in signage, home AV setups, or conference rooms.
Supports video resolution up to 4K@60Hz (4:4:4)
Extends HDMI, USB 2.0, and audio up to 100 m over Cat6 (HDBaseT)
4× USB 2.0 ports on the receiver for remote devices
Supports Ethernet transmission and CEC pass-through
Operating Temperature: 0-45°C
Power Supply: TX: 12V 1.5A, RX: 12V 1.5A
Perfect for digital signage, control rooms, and industrial AV applications.
Supports resolutions up to 4K@60Hz (4:4:4)
Transmission up to 100 m via Cat5e/6 or 60 km via fiber (SFP module)
HDMI loop-out on the transmitter
4× USB 2.0 ports on the receiver (KVM functionality)
Bi-directional analog audio, RS232, and IR control
Low power consumption, compact design
Power supply: TX: 5V 2A, RX: 5V 2A
Operating Temperature: 0-55℃
Ideal for control rooms, digital signage, and industrial environments.
HDMI Extender - extender, over CAT 5/6 cable
HDMI 1.3, 3D
1080p/60Hz
70 meters at 720p
40 meters at 1080p
Bandwidth: 2.25Gbps
Audio: LPCM 2.0
USB Micro (TX device)
The RX unit is powered by the TX
At short distance - no external voltage
Resolution up to 1080p@60Hz.
Signal extension up to 50M over CAT5e cable.
No external power required at RX unit under a distance of 30M.
