Compliance: USB 1.0/1.1 compliant, USB 2.0 compatible
12 Mbps USB data rate
Baud rate: 50 bps to 921.6 Kbps
Drivers provided for Windows, WinCE, and Linux
Serial Standards: RS-232/422/485 Connector: DB9 male
LEDs for indicating USB and TxD/RxD activity
Optical Isolation: 2 KV
OS support: See in Description
Windows 11 support
Linux Support : Linus 2.4.x, 2.6.x, 3.x

USB-32COM-RM - 32-Port RS-232 USB-to-Serial Adapter, Metal Case, Rack-Mountable.

• High speed
• 128 byte transmit FIFO & 384 byte receive FIFO
• Serial port protected with surge protection of 10KV
• Built-in switching power supply of 100V~240V
• Standard 19-inch, 1U rackmount chassis

High-speed USB to RS232/422/485 adapter
Transmission speed - up to 921.6 kbps
Supports USB 1.2/2.0/3.0
3000V DC isolation on RS232/422/485
RS232/422/485 cannot be used simultaneously
Supplied via the USB port
Automatic RS485 Direction Control
Temperature range: -25°C - +75°C
DIN rail mounting
Windows 98/ME/2000/XP/Vista (32/64-bit)
Windows 7 / 8.1 / 10 (32/64-bit)
Win 2012
Linux

Get an RS485 or RS422 port on the PC via the USB port
Galvanic isolation (optical) 2KV - 3 x 6N137 IC chip
DB9 male and screw terminal for serial connection
Baud rate up to 921.6 Kbit/s
Selection of port type with DIP switch
Support Win 10, Android
FTDI chipset FT232RL

Serial to USB converter with 1 x RS232/422/485 port

Respects +/- 11volt data signals

Galvanically isolated on the RSxxx output

Self-tuner Baud Rate

Automatic direction control

Powered from the USB port

USB connector: Type B

Supports USB 1.1, 2.0 and 3.0

COM port: terminal block

Adds eight high-speed RS-232/422/485 serial ports via USB connection
2k bytes transmitter and receiver
Requires no IRQ, DMA, I/O port
RS-232 max bit rates of up to 1 Mbps
RS-422/485 maximum bit rates of up to 10 Mbps
Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
Biasing and terminating resistors installed on board
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 2-wire signals: Data-, Data+, GND
Data Bits: 7/8
Parity: None, Even, Odd, Mark, Space
Stop Bit: 1, 2
Flow Control: Hardware (RTS, CTS), XON/XOFF
Monitor LEDs for TxD, RxD indicating port status
Built-in AC to DC switching power supply, 100VAC to 240VAC
Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
Win Server: 2000 up to 2018, Linux, MAC
Industrial quality metal case with DIN bracket for DIN rail mounting

Få 4 stk. RS232 porte på PC via USB porten

Forbind 4 x RS232 enheder til USB port
Metal kabinet og med vægmontering
Baudrate op til 115,2 kbit/s
Supporterer ikke hardware licens nøgler

Supporting Win10

Connect RS232/RS422/RS485 equipment to USB port
Baudrate up to 921,6 kbit/s
Select type of port by DIL switch
Supports Win7/8/10, MAC

USB 2.0 to 4 x RS232/422/485
High-Speed serial ports 921.6kbps
Driver for Windows, Linux, Mac OS X
LEDs for Power and TxD/RxD activity
ESD protection on USB and serial ports
2.5kV electrical isolation (ISO version only)
Bus powered (non-ISO), Self powered (ISO version)
Wide range of power input 9 - 54V DC
Metal housing
19-inch rack and wall mounts
Wide range of operating temperatures

4-Port RS-232/422/485 USB tilSeriel Adapter, metal kabinet med forlængerkabel. Til DIN skinne montering.

• Plug & Play
• DB37 forlængerkabel til 4 DB9 serielporte
• Metal kabinet.
• 4 X RS232/422/485 porte
• High speed serielport baud rate optil 921.6K bps
• 128 byte transmit FIFO & 384 byte receive FIFO

USB til 4 ports konverter med DB9 stil til DIN skinne montering.

• Med USB kabel og strømforsyning.
• Metal kabinet.
• 4 X RS422/485 porte
• Hastighed: optil 921.6 Kbpz
• 4 X DB9 hanstik