USB to 1 x RS485 / RS22 adapter, optically galvanically isolated
Get an RS485 or RS422 port on the PC via the USB port
Galvanic isolation (optical) 2KV - 3 x 6N137 IC chip
DB9 male and screw terminal for serial connection
Baud rate up to 921.6 Kbit/s
Selection of port type with DIP switch
Support Win 10, Android
FTDI chipset FT232RL
1,288.00 kr
Excl. VAT
Quantity
Physically in stock
Product number CNV-USB-UNI-I+
Specifications
| Kabel | 0,9 m |
|---|---|
| Optisk isolation | maks. 2000 V |
| Signaler | RS422/RS485 |
| Stik | 1 x DB9 |
USB to serial converters are ideal for use where serial ports are not available, for example on newer laptops and desktop PCs/servers. This can be a significant saving compared to having to convert RS485 systems to USB. All models are supplied with a loose or mounted USB cable. The converters support both OHCI (Open Host Controller Interface) and UHCI (Universal Host Controller Interface) and certain models have optical isolation up to 2000V (see diagram). Maximum speed up to 921.6 Kbit/s on the RS422/485 port
Other products in same category:
USB printer connects to RS232 port - DB9 female to USB B, 1.8 meter cable. The converter is only for specific USB printers
RS232 for USB printer adapter cable
connect USB printer to PC com port
automatic baud rate
power supply included
DB9 female and USB B
Supply voltage: 5VDC 100mA
GDI printers (without own emulation) are not supported
See list of supported printers under Downloads
1,900.00 kr
Item Number: CNV-USBB-RS232
CAN bus to USB adapter. Connects a PC with USB port to CAN Bus. CAN 2.0A and CAN 2.0B up to 1Mbps
CAN bus port on your computer via USB 1.1, 2.0 or 3.0 port
Powered from USB port
LED shows initialization and CAN bus status
Installs as a standard Windows COM port
CAN modes: Standard, Listen, Echo
Controlled using ASCII commands
API provided along with examples
Plug and play installation
CAN bus speed up to 1 Mbps
Supports CAN 2.0A and CAN 2.0B protocols
Drivers provided for Windows and Linux OS
Supports SocketCAN (slcan driver) since kernel 2.6.38+
1,132.00 kr
Item Number: CNV-USB-CAN
USB to 1 x RS232 adapter - get a COM port on PC via the USB port. FTDI chip. With threaded socket for COM cable
RS-232 serial port by connecting to a USB port
Provides DC5V/250mA to external devices - Pin 9
Compact converter
Cable length of 100 cm
Power from host USB port
LEDs indicate TxD and RxD activity
Installs as a standard Windows COM port
Full RS-232 modem control signals and hardware/software flow control
Serial port protected with 15KV ESD protection
Non-standard baud rates supported
Easy plug and play installation and RS-232 device connection
High-speed serial port with baud rate up to 921.6 kbps
Supports Windows 11, 10, 8.1, 8, 7, XP, Windows Server 2025, 2022, 2019, 2016, 2012 R2, 2012 and 2008 R2
Supports Linux Kernel version 3.0 and later
Supports Apple-provided VCP on OS X 10.9 and later
Data bit - 7/8
Stop bit - 1, 2
FTDI chip - FT232xx.
455.00 kr
Item Number: CNV-USB-SER9T
Internal USB to RS232 converter card with 5V on DB9
Two 16550 High performance UART (RS232) serial channels
Occupies one PCI or PCIe bus slot
Low Profile PCI Form Factor
Includes Low Profile PCI & Regular size PCI two brackets
Both USB A type and USB pin header connector on board to host connection
One RS232 DB9M and one RS232 10pin RJ45 serial ports on board
Includes one 10pin RJ45 – DB9M Bridge cable for 2nd DB9M port
5VDC Power output from each DB9M Port for POS device use application
2 Jumpers Individually enable / disable 5VDC output for each DM9M Port
On Board Molex mini 4Pin Power connector for sufficient DB9M 5V bus power from PC power supply
Supports 32bit/64bit Windows 7, Vista, XP, 2000, ME, 98SE
178.00 kr
Item Number: CNV-USB-RS232INT
Previous
Next







