Chipset: Broadcom BCM5761

Interface: PCI Express x1 (some versions use x4 or x8)

Network speed: 10/100/1000 Mbps (Gigabit Ethernet)

Port type: 1 x RJ45 (copper)

Controller: NetXtreme Gigabit Ethernet controller

Supported features: PXE boot (Preboot Execution Environment), Wake-on-LAN (WoL)

TCP/UDP/IP checksum offload

VLAN tagging (802.1Q)

MSI-X support (Message Signaled Interrupts)

ACPI (Advanced Configuration and Power Interface)

Drivers available for:

Windows Server

Linux (via kernel or Broadcom driver)

VMware ESXi (depending on version)

Compliant with Serial ATA 3.0
Marvel 88SE9230 processor to 4 x internal SATA connector
communication speed: 6/3 / 1.5 Gbit
Raid 0, 1, 10, Hyper duo
OS support : windoes XP / vista / server03 / server08 / win7 / 8/10 / dos / linux
Mirror data from SSD mechanical hard drives for databeskyttelske

4 Port SATA PCIE Cards for each port up to 500MB / S to 4 individual ports (no raid)
Processor. Marvell 88SE9215
SATA up to 6.0 GB / S
Non-Raid

Chipset: Intel®I350AM4
PCI Express * 2.1 (5GT / s), operable in x4 slots or greater to 4 x RJ45, Cat 5e or more
10/100/1000 Mbps
VLAN filtering, PXE remote boot, IPMI pass-through
Os Support: Win 7 / Win 8 / Win 8.1 / Win 10 32/64Bit, Spain DOS, Linux, FreeBSD, Novell UnixWare / OpenUnix 8
Operating temperature: 0 ~ 55 ℃

100 Mbit PCI-Express Fiber Card with LC connector Low Profile

2x 10Gbit Ethernet RJ45
Max. Data transfer 20000Mbit/s
Net standard IEEE 802.1Q,IEEE 802.3,IEEE 802.3ad,IEEE 802.3x
Vollduplex 10,100,1000,10000 Mbit/s
Full Duplex support
Chipset BCM57810S
Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Superior small packet performance
SR-IOV
Active Health Systems support
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (Sea of Sensors)
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)

Intel X550 chipset
PCIe v3.0 (8.0GT/S)
Automatically negotiation between 1GbE, 2.5GbE, 5GbE and 10GbE
2 x RJ45 ports
Standard Cat 6 network cables
RJ-45 Category-6 up to 55mm, Category-6A up to 100m
Support Windows 64 bit (7, 2008 R2, 8, 2012, 8.1, 2012 R2, 10, 2016
Linux(RHEL6.x/7.x, SUSE11.x/12.x, Ubuntu*14.x/16.X) FreeBSD

Cipset: WCH384L
maximum rate: 1.5 Mbps to 4 x RS-232 serial expansion
FIFO: 256-bytes (for each port)
data rate: 115kbps (for each port)
OS support: Windows 98SE / ME / NT 4. 0 / Server 2000
XP / Vista / Server 2003 / Win 7 / Win 8 / Win 10, DOS, Linux

Intel 82576EB
PCI Express v2.0 (2.5GT / s), X 4, or x8 operable in x16 slots
RJ45 (copper)
10/100/1000 Mbps
IMPI pass-through , PXE remote boot, VLAN filtering
OS support: Win 7 / Win 8 / Win 8.1 / Win 10 3264Bit
3.6W
Operating Temperature: 0 ~ 55 ℃

1000 Mbps PCI-Express Net Card for SFP
Buy 1000Mbit SFP Module Single Mode or Multi Mode
Driver For: XP / 2003, Vista / 2008, Win 7, Linux 64-bit, Mac OS X
PCI Express, 1 Lane
SFP module can be 62.5/125my or 50/125my
Operating temperature: 0 - +65°C
Dim: 121.4 x 119.5 mm

10 Gbit PCI-Express netkort med SFP+

2 ports 10 Gbit PCI-Express netkort med SFP+ og CX4

2 Ports SFP PCI Express
10 gigabit ethernet
Interface: SFP fiber optic
Chipset: Intel 82599ES
OS Support: Win 7/8 / 8.1 / 10 / DOS / Linux
Power consumption: 5.5W
Certificates: FCC, CE, RoHS
Operating temperature: 0-55 degrees

4 port Gigabit network card
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
PCI express 2.1 x 4
4 x RJ45
For normal and low profile