![](https://www.danbit.dk/460-large_default/netkort-pci-express-m-sfp-pci-express.jpg)
![10Gbit SFP+ modul...](https://www.danbit.dk/204-home_default/10-gbit-sfp-modul-lc-300m-multi-10-gbit.jpg)
10Gbit SFP+ modul 10.000Mbit, multimode, LC, up to 300m
MiniGBIC / SFP+
10 Gigabit
LC
850 nm
Up to 300 m multimode
10 Gbit PCI-Express netkort med SFP+
10 Gbit PCI-Express fiber netkort til SFP+.
Til single- eller multimode fiber, PCI Express.
10 Gigabit netkort til single- eller multimode fiber, op til 10 km kabel afhængig af hvilket SFP+ modul, der bliver isat.
MiniGBIC / SFP+
10 Gigabit
LC
850 nm
Up to 300 m multimode
MiniGBIC / SFP+
LC
1310 nm
up to 10 km, single-mode
100 Mbit PCI-Express fibernetkort med SC-stik
Intel 82576EB
PCI Express v2.0 (2.5GT / s), X 4, or x8 operable in x16 slots
RJ45 (copper)
10/100/1000 Mbps
IMPI pass-through , PXE remote boot, VLAN filtering
OS support: Win 7 / Win 8 / Win 8.1 / Win 10 3264Bit
3.6W
Operating Temperature: 0 ~ 55 ℃
2x 10Gbit Ethernet RJ45
Max. Data transfer 20000Mbit/s
Net standard IEEE 802.1Q,IEEE 802.3,IEEE 802.3ad,IEEE 802.3x
Vollduplex 10,100,1000,10000 Mbit/s
Full Duplex support
Chipset BCM57810S
Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Superior small packet performance
SR-IOV
Active Health Systems support
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (Sea of Sensors)
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)
4 Port SATA PCIE Cards for each port up to 500MB / S to 4 individual ports (no raid)
Processor. Marvell 88SE9215
SATA up to 6.0 GB / S
Non-Raid