Chipset: Broadcom BCM5761
Interface: PCI Express x1 (some versions use x4 or x8)
Network speed: 10/100/1000 Mbps (Gigabit Ethernet)
Port type: 1 x RJ45 (copper)
Controller: NetXtreme Gigabit Ethernet controller
Supported features: PXE boot (Preboot Execution Environment), Wake-on-LAN (WoL)
TCP/UDP/IP checksum offload
VLAN tagging (802.1Q)
MSI-X support (Message Signaled Interrupts)
ACPI (Advanced Configuration and Power Interface)
Drivers available for:
Windows Server
Linux (via kernel or Broadcom driver)
VMware ESXi (depending on version)
Broadcom BCM95761A6110G (based on the BCM5761 chip)
100 Mbit PCI-Express Fiber Card with LC connector Low Profile
4 port Gigabit network card
Ethernet 10Base-T, Ethernet 100Base-TX, Ethernet 1000Base-T
PCI express 2.1 x 4
4 x RJ45
For normal and low profile
2x 10Gbit Ethernet RJ45
Max. Data transfer 20000Mbit/s
Net standard IEEE 802.1Q,IEEE 802.3,IEEE 802.3ad,IEEE 802.3x
Vollduplex 10,100,1000,10000 Mbit/s
Full Duplex support
Chipset BCM57810S
Operates at 1Gbps/10Gbps, auto-negotiation, on both ports
10GBASE-T connectivity supporting up to 100 meters with CAT 6A cabling
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless offloads, as well as for TCP Offload Engine (TOE)
Superior small packet performance
SR-IOV
Active Health Systems support
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor (Sea of Sensors)
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)
4 Port SATA PCIE Cards for each port up to 500MB / S to 4 individual ports (no raid)
Processor. Marvell 88SE9215
SATA up to 6.0 GB / S
Non-Raid
