WIFI Bridge, provides a wireless network connection between 2 LANs. Setup is done and ready to use

Indoor Access Point, Gateway, Repeater, Super WDs
Ultra High Speed ​​AP With At the Atlictor Serving Users
Access Point, Gateway, Wisp, Repeater, Super Wds
Wave 2 Technology Increases the data amount to the individual User
Dual Band: 2.4GHz (300Mbps) / 5GHz (867Mbps)
High transmission power, adjustable
1 x RJ45 LAN with PoE + input
1 x RJ45 LAN
Supply voltage at non-PoE: 12VDC / 1.5A
Power Jack DC Input connector: 5.5 / 2.1 mm
2 x 2 5dbi built-in antennas
Transmission power: 100mW
Up to 50 users (Clients)
Dim: 186 x 186 X 36 mm
Operating temperature: 0 - + 40 ° C

1800 Mbit/s Access Point, Gateway, Repeater, WPA3, Dual Band, Wall / Ceiling Mounting
Support 802.1Q VLAN and SSID for VLAN Mapping
Ofdma (Orthogonal Frequency Division Multiple Access)
Support WiFi Multimedia (WMM), IGMP
Seamless Roaming
2.4GHz (600Mbps) and 5GHz (1200Mbps)
High transmission power, adjustable
4 built-in 5 dBi antennas
8 x SSID, up to 250 Clients
1 x RJ45 with PoE + input
1 x RJ45 LAN
supply voltage at non-PoE: 12VDC / 2A (5.5 / 2.1mm)
Dim: 186 x 186 x 36 mm
Operating temperature : 0 - +55°C

Outdoor Robust Dual Band Access Point etc.
AP, Gateway, Repeater, WDS, Wisp
2.4GHz and 5GHz, 600 / 1200Mbit (1800Mbit)
Max. 8 SSID (4 per radio), 150 (100) Clients
1 x RJ45 Gigabit Port PoE+ PD
IEEE 802.11ac 2T2R - Wave 2
Up to 20dBm (EIRP)
4 x N-female connector
IP67 Molded aluminum cabinet for mast mounting
Operating temperature: -40 - +70°C
real-time WiFi channel Analyzer
Dim: 295 x 231 x 80 mm
Weight: 2.5kg
Supply: POE, 48V / 0.5A (PoE+)

300Mbps AP, Gateway, Repeater, WDS, WISP
2T2R architecture with dual-polarization 14dBi antennas built
Transmission power: 100mW
10 / 100Mbps RJ45 Kirke pipe-mounting and wall mounting
supports WAN connection for DHCP, Static IP, PPPoE
IP55
Power supply: 48VDC 0.5A (802.3at PoE +) or 12VDC 1A (via DC jack)
Operating temperature: -20 - + 70 ° C
OUTLET - OLD MODEL