300Mbps Outdoor Access Point with built-in dual-polarized antenna. IP55, PoE + or 12VDC through the DC Jack.

Indoor Access Point, Gateway, Repeater, Super WDs
Ultra High Speed ​​AP With At the Atlictor Serving Users
Access Point, Gateway, Wisp, Repeater, Super Wds
Wave 2 Technology Increases the data amount to the individual User
Dual Band: 2.4GHz (300Mbps) / 5GHz (867Mbps)
High transmission power, adjustable
1 x RJ45 LAN with PoE + input
1 x RJ45 LAN
Supply voltage at non-PoE: 12VDC / 1.5A
Power Jack DC Input connector: 5.5 / 2.1 mm
2 x 2 5dbi built-in antennas
Transmission power: 100mW
Up to 50 users (Clients)
Dim: 186 x 186 X 36 mm
Operating temperature: 0 - + 40 ° C

In-Wall Dual Band Access Point / Bridge / Client
1200Mbps - 100mW
4 x 2dBi Internal Antennas
1 x RJ45 PoE + PD port Internal access - Gigabit
2 x RJ45 port, external Access - Gigabit
1 x RJ11 Port
Max. SSID 8
Max. Clients 128
IGMP proxy
SSID for VLAN Mapping (4 SSID)
Power: PoE + 48VDC
Temp -20 - + 55 ° C
Goal: 86 x 86 x 45 mm
In-Wall Back piece: 86 x 86 x 45 mm

Wifi AP, Client, Bridge, Repeater, Router
Industrial 2 x 2 Mimo
Qualcomm Atheros QCA9892
Supports IEEE 802.11 A / B / G / G / N / AC
2 x 10 / 100Base -Tx Wan / Lan-Port
TX Power 21 db to 2.4 GHz
TX Power 18 BB for 5GHz
WPA, WPA2, WPA3, WEP, TKIP, AES
Supply voltage: 9 ~ 48VDC In the 4-pin terminal block
protection against reverse polarity
IP30 protection
DIN rail or wall mountable
Operating temperature: 0 ° to 60 ° C
Dim: 162 x 110 x 46 mm

5GHz, 900Mbps AP, Gateway, Repeater, Bridge, WISP
802.11 b/g/n/ac
2T2R architecture with dual-polarizing 14dBi antennas built-in
Transmission power: 100mW
2 x 10/100/1000Mbps RJ45 Ethernet
For pipe mounting and wall mounting - clamping band included
Supports WAN connection in DHCP, Static IP, PPPoE
WPA/WPA2, WPA-PSK/WPA2-PSK and 802.1X RADIUS authentication
IP55
Power supply: PoE+ (48Vdc) or 12VDC 1A (via DC jack)
Operating temperature: -20 - +70°C
Dimensions: 260 x 87 x 38 mm