Temperature and moisture meter with 1-wire. -20 - +60 ° C, 5 - 95%rh. 12-16bit resolution. IP54 Robust House

1-wire Combi Sensor
Temperature: -20 - +60 ° C +/- 0.6 ° C
Resolution: 0.1 ° C
Humidity (Moisture): 5 -95% Rh +/- 5%
Resolution 0.1%Rh
IP54 Plastic housing, very sturdy
Up to 8 sensors on the same 1-wire
16 bits at temperature
12 bits at moisture
Supply Voltage: 4.5 / 25mW
Dimensions: 74 x 66 x 36 mm

TSH230
1,520.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

TSH230 is an IP54 temperature and humidity sensor with 1-wire interface. The temperature and moisture sensor integrated the basic elements plus signal treatment and provides a fully calibrated digital output. A unique capacitive element is used to measure relative humidity while the temperature is measured by a band GAP element. Both elements are seamlessly coupled to a 12-bit analog to digital converter. This results in superior signal quality.
The digital sensor is mounted in an IP54 classified cabinet with a sintered filter. This provides protection against dust and water jets. A cable gland with lock nut and screwless terminal block provides easy cable installation

4 other products in the same category:

PIR motion sensor,...

PIR motion sensor, temperature and light level program, relay output, M485, Modbus RTU, DCON, 10 - 30VDC. Indoors

The motion sensor light detection, temperature sensor for energy management
Connects energy management, local-lighting control via RS485 port
With powerful built-in relay for simple light activation 250VAC (1500 Watt T8 )
360 ° motion detection - up to 8 m in diameter and 4 meters height
Time delay / Sensitivity is adjustable
temperature sensor, - measuring the room temperature or fire alarm
Relay output to turn on the light via the PIR / light-strength and temperature sensors
RS485 2-wire communication bus
DCON and Modbus RTU protocols
ceiling surface mounted design
Supply voltage: 10 - 30VDC ca. 2W
Dimensions: Ø121 x 52 mm | IP20

Price 967.00 DKK
Product code: M485-PIRTEMP-I
Physically in stock  
Quick view
M-BUS to RS232 / RS422 /...

M-BUS to RS232 / RS422 / RS485 converter, M-BUS slave units can be connected, -25 - +75°C

RS485 / RS422 / RS232 converter for Meter-Bus meters, actuators, etc.
Supports up to 100 Meter-Bus meters (slaves)
Selecting the serial port, only one can be selected to be active
2 x Baud rate (M-bus and COM port can be selected at different speeds)
Baud rate: 300 to 115,200 bps
Transparant data - no protocol conversion
M-bus connection is 2-wire , max. 350meter.
larger distance up to 5km requires a number of M-bus repeaters
Supply voltage: 10 - 30VDC, 1.8 - 12Watt
Dimensions: 122 x 72 x 33 mm | Removable terminal blocks
Operating temperature: -25 - + 75 ° C
DIN bracket
Robust plastic housing

Price 2,797.00 DKK
Product code: M485-MBUS-I
Physically in stock  
Quick view