![](https://www.danbit.dk/47-large_default/programmable-mini-plc-for-din-rail-plc-hmi.jpg)
![Cable for programming the PLC](https://www.danbit.dk/3364-home_default/cable-for-programming-the-plc-home.jpg)
Cable for programming the PLC
Cable for programming the PLC from a PC
6 pcs. DC / analog inputs, 4 transistor outputs, DC 12-24V
Remote control capability via a modem and telephone calls from alarm
Several PLC can communicate with each other via an RS485 network
Cable for programming the PLC from a PC
Cable for connection between PLC and modem
Network cable for connection between PLCs
2.8" Touch HMI device with Ethernet and PoE
High Resolution color touchscreen
RTC (Real Time Clock)
GUI design
Modbus TCP/RTU protocol
ESD protection: 4 kV
Operating temperature: -20 ° C ~ 70
Network cable for connection between PLCs
2.8" HMI control panel for I / O modules
can be connected to many RS485 modules from the manufacturer
with TFT display and touch
RS485 Bus, Modbus RTU protocol
USB port for programming
Free HmiWorks Development Software
RTC Real Time Clock
Supply Voltage: 12 - 48VDC
Dim: 119 x 76 x 33 mm
For automatic announcment over telephone linie. Can handle preprogrammed messages