![](https://www.danbit.dk/49-large_default/dc-12-24v-6-pc-dc-input-4-transistor-output-plc-hmi.jpg)
![Cable for programming the PLC](https://www.danbit.dk/3364-home_default/cable-for-programming-the-plc-home.jpg)
Cable for programming the PLC
Cable for programming the PLC from a PC
DC 12-24V, 6 pcs. DC / inputs, 4 transistor outputs
Possibility to remote control via modem and phone calls from generated alarm
Several PLC diet communicate with each other via an RS485 network
Cable for programming the PLC from a PC
Cable for connection between PLC and modem
Network cable for connection between PLCs
6 AC inputs and f4 relay outputs. AC 110-240V
Detachable LCD-display for PLC for showing status
HMI Panel with LCD Display, Ethernet and Com Ports
Can be connected to most of the manufacturer's I / O modules
Power supplied from PoE or 12 - 48VDC / 2.5 Watt
RS-485 (with self-tunes) < Br> RS-232 (RX / TX / GND)
RTC - Real-time tour
GUI design
Free HmiWorks development tools
supports C and Ladder designer
design suggestions from manufacturer
Modbus TCP / RTU protocol
Dim: 140 x 87 x 41 mm
For autoimatic announcment call over telephone line. Memorising preprogrammed messages/alarm