![](https://www.danbit.dk/54-large_default/programmable-mini-plc-for-din-rail-mounting-plc-hmi.jpg)
![Cable for programming the PLC](https://www.danbit.dk/3364-home_default/cable-for-programming-the-plc-home.jpg)
Cable for programming the PLC
Cable for programming the PLC from a PC
PLC to DC 12-24V with 12v DC / analog inputs and 8 transistor
Possibility of remote control via modem and phone calls by alarm
More PLCs can communicate among themselves via an RS485 network
Cable for programming the PLC from a PC
Cable for connection between PLC and modem
Network cable for connection between PLCs
HMI Panel with LCD Display, Ethernet and Com Ports
Can be connected to most of the manufacturer's I / O modules
Power supplied from PoE or 12 - 48VDC / 2.5 Watt
RS-485 (with self-tunes) < Br> RS-232 (RX / TX / GND)
RTC - Real-time tour
GUI design
Free HmiWorks development tools
supports C and Ladder designer
design suggestions from manufacturer
Modbus TCP / RTU protocol
Dim: 140 x 87 x 41 mm
Mini PLC for DC 12-24V
12 x DC / Analog inputs
8 x transistor outputs
6 pc. DC / input, 4 relay output, DC 12-24V
6 pcs. DC / analog inputs, 4 transistor outputs, DC 12-24V