4 Ports RS232 Extender over fiber cable 1200 - 115Kbps, 4 x DB9 male connector. 100Mbit SFP Multi Mode or Single Mode.
4 COM ports via optical fiber cable
point to point or pount to 4 points
4 x RS232 ports up to 2km with multi mode cable
4 x RS232 ports up to 20km with single mode cable
Buy 100Mbit SFP Module (Multi Mode or Single Mode)
1 x 100 Mbit SFP for LC Duplex Fiber cable
4 x RS232 DB9 male connector
Setup via built-in Web server
62 x 50 x 120 mm
DIN fittings
Display 3 LEDs Displays TX / RX, Network and System Status
Supply voltage: 9 - 32VDC Redundant (not supplied)
2,500.00 kr
Excl. VAT
Quantity
Physically in stock
Product number BOOST-4RS232-FIBER
Boost-4RS232 fiber connect up to 4 devices with serial ports via light leader over distances up to 2 km, 30 km or 60 km to other RS232 units.
Can be configured with a built-in web server .
Ideal for plants where parts of the network use light guide cable. See our other equipment with fiber interface (network card, switches, media converters, etc.) Typical applications available in industrial environments, where electrical disturbances are critical and where there must be a galvanic connection between the local and remote area.
Serial ports: Fire RS232 ports with speeds from 1200 bps for 115 Kbps
Databit: 7/8, Stop Bit: 1/2
Parity: Straight / odd / No
Flow Control: RTS / CTS, Xon / Xoff < Br> Signals: RS232: TXD, RXD, RTS, CTS, DSR, DSR
Network: 100Base-FX Via LC Light guide cable
protocols: TCP / IP, UDP, HTTP, SNMP Read, telnet, DHCP, ICMP, BootP, ARP
Connector: Serial Ports: RS232: 4 x DB9 He
Lighter: SFP Slot for SFP Transceiver (LC Fiber)
Supply: Screw terminal block with extra input for redundant supply
Cabinet: 162 x 50 x 120 mm (H x B x d) - w / Holder for your shine
display: 3 LEDs Displays TX / RX, Network and System Status
Power Supply: Requires 9 - 32 VDC Max. 6 watts via screw terminals (supplied. Not )
Use DC12V / 1A-RQ
CPU: 16 Bit CPU, 100 MHz
Memory: 512 KB RAM, 512 KB Flash and 512 Bytes EEPROM
Watchdog Timer: 1.34 sec. Hours for automatic reset
Other products in same category:
8 Ports serial port server, RS485 / RS422, 230VAC Moxa Nport 5630-8
8 pcs. External COM ports via Ethernet and Internet
Virtual-Com Port, Pair-Mode - Back to Back
Socket Modes: TCP Server / TCP Client / UDP
easy to configure
cables Not included (RJ45 for DB9)
Supports Win10 and earlier us, Linux
4,700.00 kr
Item Number: ETH8SER485
1 serielportserver port RS232 / 422/485, DE-MOXA 211 Serial Device Server
External COM ports via Ethernet and Internet
3-in-1 Serial Port: RS-232, RS-422, OR RS-485
Modes: TCP Server, TCP Client, UDP
Ethernet Modem
Pair Connection
Real Com / Tty Drivers for Windows and Linux
2-wire RS-485 with Patented Automatic Data Direction Control (Addc®)
Built-in 15 kV ESD Protection for All Serial Signal
1,355.00 kr
Item Number: ETH1SER+
2 Ports seriesport server with RS232, Moxa Nport 5210A. Serial Device Server with 2 x DB9 he
External COM ports via Ethernet and Internet
Compact and but finding room for
Socket Modes: TCP Server / TCP Client / UDP
Windows Utility for Configuring Multiple Device Servers
Supports 10 / 100m Ethernet
2 x DB9 male
SNMP MIB-II for Network Management
Power supply included
2,202.00 kr
Item Number: ETH2SER232+DB9
2 ports serial port server RS232 / 422/485, Moxa NPort 6250. Serial Device Server
External COM ports via Ethernet and Internet
2 ports secure terminal server, MOXA NPort 6250
1 X RJ45 and 2 X RS232 / 422/485 (DB9) connectors
10 / 100 Mbps, auto MDI / MDIX
Operation Temp. 0 - 55 °
Supplied via 12-48 VDC
2,950.00 kr
Item Number: -NP6250
1 port serial server RS232 / RS422 / RS485. Serial Device Server RJ45, DB9, 9 - 30VDC
External COM port over Ethernet and Internet
RS232/422/485
Baud rate: 1200 - 230.4kbps (2-wire)
Max. baud rate at 4-wire RS485 up to 921.6kbps
Atop SE5201-DB Serial Device Server
10/100Mbit Ethernet.
Serial port via DB9 male connector
Supports TCP Server/Client, UDP, Virtual COM and Tunneling modes
Power is supplied from 9 - 30VDC or 5VDC (power jack)
Power supply not included
DIN kit (option)
Dimensions: 65 x 78 x 28mm (without wall bracket)
Dimensions: 88.5 x 84 x 27.8mm (with wall bracket and DB9 port)
1,525.00 kr
Item Number: ETH1SER-MINI+
Previous
Next








