USB with galvanic isolation for USB devices and up to 15 kV overvoltage. Output 5VDC/420mA

Isolates and protects USB device from USB host
Electrical insulation up to 3000V both directions
Common mode filtering on all data lines
Output voltage: 5V 420mA
USB2.0 12 Mbps or USB1.1 1.5 Mbps with jumper
No software or drivers required
Short circuit protection
LED for power indication
Operating temperature: -40 - +70°C
Robust metal housing with DIN rail mounting
USB cable is securely locked to the case

USB-ISO+
1,531.00 DKK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

Galvanic isolation of USB devices up to 15 kV overvoltage

Beskyttelse
Protected with surge protection of 15kV 3000V DC optical isolation for all signals Short circuit protection
Dimensioner
73mm × 52mm × 25mm (L × W × H) 73mm × 75mm × 25mm (L × W × H) with DIN rail ears
Driftstemperatur
-40°C to 70°C (-40°F to 158°F)
Forsyning
Power supplied via USB (5V) connector No external power needed
Kabinet
SECC metal chassis with DIN rail brackets
Porte
1 x tilslutningsport fra pc’en med 1 m USB kabel type A hunstik. 1 x tilslutningsport USB 1.1, type A stik. Kompatibel med USB 2.0 (maks. hastighed er 12 Mbps)
USB
USB 1.0/1.1 compliant, USB 2.0 & 3.0 compatible Speed 12Mbps, full-speed USB 1.5Mbps, low speed USB
Weight
190g

4 other products in the same category:

4 Port USB 3.2 Extender up...

4 Port USB 3.2 Extender up to 100 m above CAT6a / CAT7 network cable. 5Gbps. Optimized for USB cameras, video over USB,

Extremely fast USB extender - ideal for USB cameras and the like.

USB 3.2 Gen 1 extender with data rate up to 5 Gbps
Supports all USB 3.1, 2.0, 1.1 units while full bandwidth
Set of transmitter and receiver with the 4 port hub
4 x USB 3.2 ports Gen 1
Power from the USB port: up to 1.2 A (6 W) per. USB port
2 x 24VDC 1A / 2,7A power supplies included
100/1000 Ethernet channel; LAN through
Single cable, CAT 6a / 7 up to 100 m
Point-to-point connection
Supports all USB transfer types (control, interrupt, isochronous and bulk)
Optimized for camera - and video recording devices

Price Call for price
Product code: BOOST-USB100-3.2
On the way in  
Quick view
USB to 8 x...

USB to 8 x RS232/RS422/RS485 adapter, port-type selector on the back

Adds eight high-speed RS-232/422/485 serial ports via USB connection
2k bytes transmitter and receiver
Requires no IRQ, DMA, I/O port
RS-232 max bit rates of up to 1 Mbps
RS-422/485 maximum bit rates of up to 10 Mbps
Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
Biasing and terminating resistors installed on board
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 2-wire signals: Data-, Data+, GND
Data Bits: 7/8
Parity: None, Even, Odd, Mark, Space
Stop Bit: 1, 2
Flow Control: Hardware (RTS, CTS), XON/XOFF
Monitor LEDs for TxD, RxD indicating port status
Built-in AC to DC switching power supply, 100VAC to 240VAC
Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
Win Server: 2000 up to 2018, Linux, MAC
Industrial quality metal case with DIN bracket for DIN rail mounting

Price 4,211.00 DKK
Product code: CNV-USB8UNI-R
On the way in  
Quick view
USB to 1 x RS232 / RS422 /...

USB to 1 x RS232 / RS422 / RS485 adapter. 300 - 115.2kbit. Complies with COM signals +/-11Volt. Galvanically isolated

Serial to USB converter with 1 x RS232/422/485 port
Respects the +/- 11 volt data signals
Galvanically isolated on the RSxxx output
Self-tuner Baud Rate
Automatic direction control
Powered from the USB port
USB connector: Type B
Supports USB 1.1, 2.0 and 3.0
COM port: terminal block

Price 1,196.00 DKK
Product code: M485-USB-I
Physically in stock  
Quick view