LAN Extender / Repeatere

LAN extenders are used for a wired network connection (RJ45 PDS / PDU cable), where the distance between the 2 points is longer than the limit of 100 meters. If it is physically possible, up to 2 pieces can be placed. LAN extenders every 100 meters. It provides a maximum length of 300 meters. The LAN Extender is actually a 2-port network switch.

There are LAN extenders powered by PoE voltage. This PoE voltage can be passed on to the...

LAN extenders are used for a wired network connection (RJ45 PDS / PDU cable), where the distance between the 2 points is longer than the limit of 100 meters. If it is physically possible, up to 2 pieces can be placed. LAN extenders every 100 meters. It provides a maximum length of 300 meters. The LAN Extender is actually a 2-port network switch.

There are LAN extenders powered by PoE voltage. This PoE voltage can be passed on to the next 2 LAN extenders.

LAN distances in excess of 300 meters can be solved with VDSL modules, which can reach over 1 km. The connection is a 2-wire pair-twisted or coaxial cable.

LAN extenders over the mains are an emergency solution and here the 2 to several ELNET devices must be in the same phase .

LAN Extender for network connection

LAN Extender / Repeatere

There are 14 products.

Showing 1-14 of 14 item(s)

Active filters

  • Network through powerlines

    Network through powerlines

    Ethernet through the same phase of electric cables - sold as a set (2 pcs.)

    Not suitable for industrial use.

    Price 400.00 DKK
    Product code: ETH-ELNET-P500
    Physically in stock  
  • PoE+ extender. Go beyond...

    PoE+ extender. Go beyond the 100 meter limit. Sends PoE & Data Through

    10/100 / 1000Mbit PoE Network Extender
    Extend the network cable with PoE over the magic 100 meters
    4 pieces. Extenders provide a maximum distance of 500 meters
    Extenders are powered from PoE and pass PoE on to the next Extender
    Dimensions: 94 x 70 x 26 mm

    PoE In: Max 30.8 Watts

    PoE Out: Max 26 Watts
    Weight: 189g

    Price 800.00 DKK
    Product code: ETH-POE-BOOST-1G+
    Physically in stock  
  • Ethernet over 2-wire...

    Ethernet over 2-wire connection. VDSL 10/100 / 1000mbit network up to 1.4 km, with PoE output.

    Use 2 pcs. Eth-VDSL2 + for an Ethernet connection (Bridge)

    up to 1.4 km Ethernet connection with 2 pcs. VDSL devices
    Poe over 2-wire connection
    1 x LAN 10/100 / 1000Base-T RJ45 Auto-MDI / MDI-X Port
    1 x VDSL2 RJ11 She
    Splitter for analogously Telephone connection included
    Power supply: 54V / 0.74A included
    POE + (30W) for eg. Access Point, IP camera.
    Prepared for your mounting, wall mounting
    Your fittings are purchased

    Price 1,900.00 DKK
    Product code: ETH-VDSL2+
    On the way in  
  • Ethernet over 2-wire...

    Ethernet over 2-wire connection with VDSL. 10/100Mbit. 4 Ports Switch. Up to 1.4 km between 2 VDSL modules

    Use VDSL connection over 2-thread cable where WiFi is an unstable connection

    up to 1.4 km above eg. Conducted phone cable with 2 pcs. VDSL modules
    Use 2 pcs. ETH-VDSL2+4+ or ETH-VDSL2+A and ETH-VDSL2+4+
    Ethernet over 2-wire connection with VDSL
    Ideal solution When the network distance is over 100 meters of border
    ideal solution when a WiFi Link is an unstable connection
    providing a transparent data connection
    supply: 5VDC, 2A power supply included
    DIP switch: VDSL connection must be set to CPE and the other for CO.
    Prepared for your Montage, wall assembly. Your fittings are purchased
    Order 2 pcs for a set.

    Price 1,456.00 DKK
    Product code: ETH-VDSL2+4+
    Physically in stock  
  • Ethernet extender over coax...

    Ethernet extender over coax cable, 1 km with PoE. Data and PoE over Coax (25W). VDSL. Set of 2 units. Use 75 Ohm Coax

    1000 meter - network extender over coax cable.
    Poe transferred in cable
    1 x 10 / 100mbit base-TX RJ45
    Auto-Negotiation / Auto-MDI / MDI-X
    Poe Standard: IEEE 802.3AT / BY
    PoE Output: 48-56VDC Max. 25 Watt
    PoE Mode: End-Span, RJ45 Pin 1/2 (+), 3/6 (-)
    1 x BNC Hun - RG59 Coax
    Max. Distance: 200m w / Poe +, 1000m w / Poe, 1600m without Poe
    Power supplied from 48-56VDC min. 2amp

    Price 2,588.00 DKK
    Product code: ETH-VDSL-RG+P
    On the way in  
  • Ethernet over 2-wire...

    Ethernet over 2-wire connection with VDSL. Up to 90Mbps and up to 1.4 km between 2 VDSL modules. Secure substitute for WiFi

    2 pieces. VDSL2 + A can be established network connection over the 2-wire cable

    Up to 1.4 Km Ethernet bridge via the 2 pieces. VDSL2 + A
    speed depends on cable and length - up to 90Mbps
    Automatically adapts speed to highest speed
    can also communicate with ETH-VDSL2 + 4 + (4 port switch)
    1 x LAN 10/100 BASE-T RJ45 auto-MDI / MDI-X port
    1 x VDSL2 + A RJ11 she
    supply: 5VDC, 2A power supply included
    By 2 pcs. ETH-VDSL2 + A one shall be put to the CPE and the other to CO.
    Connect each end of the 2-wire twisted pair cable.
    ESD protection: 6KV DC Kirke DIN mounting, wall mounting. Your hardware purchased
    SOLD SEPARATELY! Order 2 pieces for one set.

    Price 1,079.00 DKK
    Product code: ETH-VDSL2+A
    Physically in stock  
  • Long Reach Ethernet...

    Long Reach Ethernet Extender, VDSL over a point to point RJ45 UTP cable. Up to 80Mbps at 200 meter, 30Mbps at 600 meter.

    Transparent Ethernet connection up to 1200 meters
    Medium range from 11 - 80Mbps up to 1200 meters
    Long range from 14 - 89Mbps up to 700 meters
    Range is dependant on cable quality etc.
    1 x RJ45 for LAN
    1 x RJ45 for Link (RJ11 can also fit into the female plug
    DIP Switch to select Master or Slave mode
    Dimensions: 97 x 70 x 26 mm
    Cabinet: Metal
    Weight: 189g
    Supply voltage: 5VDC/2A
    Temperature: 0 - +50°C

    Price 1,120.00 DKK
    Product code: ETH-VDSL2+AL
    Physically in stock