CALL US NOW: +45 56 66 20 20
External accessories for PC upgrades or more functions. We have a large selection of hard drives, memory cards, adapters and expansion cards. Here you can buy loose accessories for more specific solutions. See our subcategories to find the right accessories to what you need, otherwise you are more than welcome to contact our sales department.
16-port USB 3.0 HUB good for duplicating multiple USB storage devices.
Dimensions: 182x123x25mm
Material: Plastic
Driver: Not required
Supported systems Windows, Mac OS, Linux
Output: 5V 500mA
Power supply: 5V/5A
Certificates: CE/FCC/ROHS
Protection vs Over current, Over voltage, Electrical leakage, Short circuit, Clutter.
USB 2.0, USB 1.1
Power from USB or AC / DC power adapter
read and write to PCMCIA hard disk, ATA Flash. DOES NOT READ SPECIAL CARDS!
read and write to CF-I, CF-II Smart Memory, Memory Stick, Micro Drive, Multimedia Card, Secure Digital Card and XD
Card use of additional Flash adapter.
Complete Plug and Play
USB Bootable from PCMCIA hard drive (depending on system BIOS support)
Serial ATA bootable from PCMCIA hard drive
Up to 480 Mbit/sec (60 MB/sec) data transfer* for USB 2.0, 10 times the speed of USB 1.1
Up to 1500 Mbit / second (150 MB / sec) data transfer to eSATA
USB version works under Windows 98SE, Me, 2000, XP, 7, 2003, Windows 10
Note! Certain cards are not supported Memory card and Verifone card. Buy the cards together with the reader to be sure!
Will not be returned because card cannot be read. Send any short, then we test whether the reader can read them.
new!
Last in stock
is eol
Disk drives, DVD ± RW (± R DL) / DVD-RAM, 8x / 8x / 5x, USB 2.0, external
32GB cf card
Available in several sizes
The picture is not the cf card you get!
Card Reader 8-In-One USB 3.0 Bus Powered.
2 x SD and 2 x Micro SD available
SDHC/Micro SDHC to SDHC/Micro SDHC
Compliant with the USB2.0 / 1.1 specification
Support CompactFlash Ultra DMA mode 6
Supports major memory cards including the SDXC
Plug & play simplicity
Auto detect card memory
support USB3.0 Ultra Hi speed transfer 100MB/s
Support 5Gbps Super SpeedU / 480Mbps high speed and full speed transfer rates
Supports bus powered modes
Form factor 2.5"
SATA with backwards compatibility to SATA Rev. 2.0 (3Gb/s)Capacities2120GB
NAND3D
Power Consumption0.195W Idle / 0.279W Avg / 0.642W (MAX) Read / 1.535W (MAX) WriteStorage
temperature -40°C~85°C Operating temperature0°C~70°C
Dimensions 100.0mm x 69.9mm x 7.0mm (2.5”)
Weight 39g (120GB – 2.5”
Vibration operating 2.17G Peak (7–800Hz)
Vibration non-operating
20G Peak (10–2000Hz)
Mobil SD/ Micro SD kortlæser til Smartphones. Transportabel kortlæser OTG (On The Go) til Smartphones
Mobil SD/ Micro SD kortlæser til Smartphones. Transportabel kortlæser OTG (On The Go) til Smartphones
Mobil SD/ Micro SD kortlæser til Smartphones. Transportabel kortlæser OTG (On The Go) til Smartphones
USB3.0 til IDE/SATA adapter
Til 2½" og 3½" HDD og SSD
Inkl USB3.0 kabel (USB A han til USB B han, 1,2 m)
LED indikator
ON/OFF knap
Forsyning: 12V, 2A
3½” floppy to floppy drive
Formatted to 1.44 MB
The price is per. 1 piece. floppy disk
Get a quote if they need to be formatted to 720kB
U.2 SFF-8639 NVME / SATA 22 PIN for 1 x M.2 Convert
1 x U.2 SFF-8639 Han connector
1 x SATA 6 GB / S 22 Pin
1 X 67 Pin M.2
SATA / PCIE slot
NVME M.2 can only be used with U.2 SFF-8639 Port
SATA M.2 can only be used with SATA Port
USB3 A and C for SATA 7 + 15 pin adapter cable for SATA2.5 / 3.5 "HDD
Plug & Play and Hot Swap
Used for 2.5" SATA HDD / SSD, 3.5 "SATA HDD (use 12v DC PSU)
Supports: WIN XP, Vista / 7/8 / 8.1 / 10 and Mac
