12VDC / 3A (36Watt) DC-DC converter from 8-40VDC. In molded aluprofile. IP68. Not galvanic isolated
INPUT 8-40VDC
OUTPUT 12VDC 3A
Operating temperature -30 ° C to + 80 ° C
not isolated between input and output.
IP68
Overvoltage protection
over -Current protection
over-temperature protection
299.00 kr
Excl. VAT
Quantity
Physically in stock
Product number DC-DC12V3A
Specifications
| Operating Temp. | -30°C to +80°C |
|---|---|
| Forsyning | 8 - 40VDC |
| IP-Tæthed | IP68 |
| Dimensioner | 64mm x 57mm x 22mm |
DC-DC switch mode buck konverter.
Other products in same category:
12VDC / 700mA step-up power supply from 5VDC/2.5A via USB plug. Jack is 5.5/2.1mm
MAX 12V 0.7A (8.4 Watts)
USB to 2.1x5.5 mm plug
To supply 12V/0.7A, the 5V input must be a minimum of 2A
A PC USB2.0 port provides max. 5V/0.5A (2.5 Watt)
A PC USB3.0 port provides max. 5V/0.9A (4.5 Watt)
Laptop is typically 5V/0.2A (1 Watt)
For power consumption above what a USB port can supply - use an external 5V power supply
The power is dependent on the 5V supply (P=V*A) (Power=Voltage * amps)
1 meter cable
185.00 kr
Item Number: DC-DC5VUSB-12V
19VDC from 9-32VDC 5AMP (95W) waterproof DC / DC converter. Step-up and step-down converter. not galvanically isolated.
Waterproof DC / DC converter
9-32V to 19V
5 Amp
95 Watts
90% (half load), 87% (full load)
-40 ° c ~ + 80 ° c, IP68
Overvoltage protection
Over-current protection
Over-temperature protection
Short-circuit protection
74 * 74 * 32mm
300g
550.00 kr
Item Number: DC-DC19V-95W
Output 48VDC / 8A (384Watt), input from 10 - 25VDC. DC-DC step-up, Not galvanically isolated
12-25VDC to 48VDC 384Watt step-up converter
No galvanic isolation between input and output
Input from 10 - 25VDC
93% efficiency
Max. ripple full load: 170mV
No-load current: 70mA
Overvoltage and overheat protected
Aluminum metal housing with IP68 tightness
Flange mounting
Cable length: 14cm
Working temperature -40 - +80°C
Dimensions: 100 x 80 x 39mm
Weight: 500g
944.00 kr
Item Number: DC-DC48V-384W
Previous
Next







