Addressable RS-485 to 3 x RS232/RS485 converter with 1 x DI, 10 - 30VDC
Previous
Next
Addressable RS-485 to 3 x RS232/RS485 converter with 1 x DI, 10 - 30VDC

Addressable RS-485 to 3 x RS232/RS485 converter with 1 x DI, 10 - 30VDC

Includes firmware for "Addressable RS-485 to RS-232 converter"

Supports Dual-Watchdog commands

Supports startup value and safe value for DO

Supports real-time monitoring/control for the built-in DI/DO

Includes a 1KB queue buffer for each RS-232 interface

Low power consumption

Supply: +10 - +30VDC

1,826.00 kr
Excl. VAT
Quantity
On the way in
ADD TO CART
Product number M485-ADR-CNTROL
Get Volume Offer
close

Get Volume Offer

 
file_download DOWNLOADS
Ask a question
close

Stil et spørgsmål

 

 

Download PDF

Most RS-232 devices do not support device addressing. The M485-ADR-CNTROL series assigns a unique address to any RS-232 device installed on an RS-485 network.

When the host PC sends a command with a device address to the RS-485 network, the destination M485-ADR-CNTROL module strips the address field and then sends the other commands to its local RS-232 devices.

The response from the local RS-232 devices is returned to the host PC via the M485-ADR-CNTROL module. The M485-ADR-CNTROL products are unique in that they are a master-type converter that utilizes our ROC patent 086674,

Most other converters are a slave type, which cannot operate without a host PC. In real industrial applications, many users are not satisfied with slave type converters, as they cannot be customized to individual needs.

Other products in same category:

ICPDAS I-7531-G is an optoisolated CAN bus repeater. Amplifier and restores correct pulse shape
CAN bus repeater. Amplifier and restores correct pulse shape. Up to 800kbps. Opto-isolated. DIN bracket.

CAN Bus Booster
CAN specification 2.0A and 2.0B
ISO 11898-2 standard
Max. Baudrate: 800 Kbps
Jumper for 120Ω Terminal resistance on the CAN bus
2 CAN channels
Automatic Baud Rate
Up to 100 nodes on each CAN port
Removable terminal block
DIN bracket
Supply: 10 - 30vdc

Call +45 56 66 20 20 for price
Item Number: M485-CAN-I+
On the way in
ADD TO CART
Quick view
CAN bus for single mode fiber with manual switch for CAN baud rate
CAN bus to Single Mode Fiber. CAN 2.0A, CAN 2.0B. Manual CAN baud rate sw - 10K -1Mbps. 10 - 30VDC

Baud rate (bps): 10K - 1M
Terminator Resistor: 120 Ohms
3000VDC DC-to-DC isolation 2500Vrms for photo-couple
ISO 11898-2, CAN 2.0A and CAN 2.0 B
SC single mode, 1310 nm
RS-232 COM1
+10 - + 30VDC unregulated
-25 - + 75 degree driftemperatur
10-90% humidity

2,759.00 kr
Item Number: CNV-CAN-FIBER-SM
Physically in stock
ADD TO CART
Quick view
Modbus TCP Server Master til M-Bus Slaver Gateway. Supporterer op til 100 M-Bus enheder
Modbus TCP Server Master for M-Bus Slavs Gateway. Supports up to 100 M-bus units. 1 x RJ45, 1 x RS232, M-Bus

Supports M-Bus Standard: EN-13757, CJ / T -188
1 x RJ45 Modbus TCP
1 x M bus for maximum 100 slaves
M-Bus Power limiter
1 X RS232 for firmware update
Modbus TCP / RTU Function code 0x03 and 0x04 To read measurement data
Baud rate: DIP switch to M-Bus and serial port from 300 to 115200 BPS. Standard M-Bus port- Data format: data bit 8, parity straight, stop bit 1
supports up to 100 m bus slaves
m-bus power protection
short circuit protection on M-bus
Firmware updates via serial port
gives PWR, MTX and MRX 3 LED Indicators
Wall Mounting
Dim: 123 x 102 x 40 mm
Supply voltage: 10 - 30VDC

3,455.00 kr
Item Number: ETH-MOD-MBUS-I
On the way in
ADD TO CART
Quick view
MODBUS / TCP Master Serial RTU Slave, Gateway, 1 x RJ45 1 x RS232
MODBUS / TCP to serial RTU Master Slave, Gateway, 1 x RJ45, 1 x RS232 isolated, -25 - + 75 ° C, PoE, or 12 - 48VDC

Compact Modbus / TCP for RTU / ASCII Gateway with PoE
must not be programmed
1 x RJ45 10 / 100Mbps
1 x RS232 (DB9 Han)
Supports Modbus TCP / UDP Master and Slave
Supports Modbus RTU / ASCII Master and Slave
Baud Rate Up to 115,200 BPS
Self-Tuner for RS232
IEEE 802.3af - PoE (PD)
Supply voltage U / Poe: 12 - 48VDC 2Watt
Goal: 90 x 52 x 27 mm
DIN bracket
Operating temperature: -25 - + 75 ° C

1,209.00 kr
Item Number: ETH-MODGW712-I
Physically in stock
ADD TO CART
Quick view
MODBUS / TCP to serial RTU Master Slave, Gateway, 1 x 1 x RJ45 RS485 / 422 isolated
MODBUS/TCP to serial RTU Master/Slave, Gateway, 1 x 1 x RJ45 RS485 / 422 isolated, -25 - +75°C, PoE, or 12 - 48VDC

Compact Modbus / TCP to RTU / ASCII gateway with PoE
not to be programmed
1 x RJ45 10 / 100Mbps
1 x RS485 / 422 (screw terminal)
baud rate up to 115,200 bps
Self-tuner for RS485 / 422
Automatic transmission / reception direction of RS485
IEEE 802.3af - PoE (PD)
Supply voltage u / PoE: 12 - 48VDC 2Watt
Dimensions: 90 x 52 x 27 mm
DIN bracket
Operating temperature: -25 - +75°C

1,566.00 kr
Item Number: ETH-MODGW715-I
On the way in
ADD TO CART
Quick view
MODBUS / TCP to serial RTU Master Slave, Gateway, 1 x RJ45 1 x RS-232/485/422 isolated
MODBUS / TCP to serial RTU Master Slave, Gateway, RJ45 1 x 1 x RS-232/485/422 isolated, -25 - +75°C, PoE, or 12 - 48VDC

Compact Modbus / TCP to RTU / ASCII gateway with PoE
not to be programmed
1 x RJ45 10 / 100Mbps
1 x RS232 / RS485 / RS422 (terminal block)
Choose only one COM port as interface
3-pin RS232 (RX, TX, GND)
baud rate up to 115,200 bps
Self-tuner for RS232
IEEE 802.3af - PoE (PD)
Supply voltage u / PoE: 12 - 48VDC 2Watt
Dimensions: 90 x 52 x 27 mm
DIN bracket
Operating temperature: -25 - +75°C

1,382.00 kr
Item Number: ETH-MODGW718-I
On the way in
ADD TO CART
Quick view
MODBUS / TCP Master Serial RTU Slave, Gateway, 1 x RJ45 1 x RS232 1 x RS485
MODBUS / TCP to serial RTU Master Slave, Gateway, 1 x RJ45 1 x RS232 1 x RS485 isolated, -25 - +75°C, PoE, or 12 - 48VDC

Compact Modbus / TCP to RTU / ASCII gateway with PoE
not to be programmed
1 x RJ45 10 / 100Mbps
1 x RS232 (terminal block) - 5-pin
1 x RS485 (terminal block ) - 2-pin
baud rate up to 115,200 bps
Self-tuner for RS232
IEEE 802.3af - PoE (PD)
Supply voltage u / PoE: 12 - 48VDC 2Watt
Dimensions: 90 x 52 x 27 mm
DIN bracket
Operating temperature: -25 - +75°C

1,540.00 kr
Item Number: ETH-MODGW724-I
On the way in
ADD TO CART
Quick view
RS232 / RS422 / RS485 serial signals over single mode fiber
RS232 / RS422 / RS485 for single mode fiber module. 15km, TX1310, RX1550

Module A - Serial for Fiber - Fiber for Serial Link
Automatic RS-485 Directional Control
Optical Fibers Allows Transmission Up to 15 km to B Module
Avoid lightning and EMI / RFI interference
Supports +10 VDC ~ +30 VDC
ESD protection for data line RS-232/422/485
DIN rail mounting
support operating temperatures from -25 ° C ~ +75 ° C

2,474.00 kr
Item Number: M485-FIBER-AS
On the way in
ADD TO CART
Quick view
Previous
Next