![](https://www.danbit.dk/474-large_default/4-port-poe-injector-30-watt-per-port-4-x-lan-in-4-x-lan-with-poe-out.jpg)
![TILBEHØR: KØLER/ FAN TIL...](https://www.danbit.dk/6081-home_default/tilbehr-kler-fan-til-eth-poe24x-poe-injector-network.jpg)
TILBEHØR: KØLER/ FAN TIL ETH-POE24x POE INJECTOR
TILBEHØR: KØLER/ FAN TIL ETH-POE24x POE INJECTOR
LAN without PoE voltage gives LAN with PoE
4 port PoE power supply 30 Watt per port
Connects between non-PoE switch and e.g. IP cameras with PoE
For 10/100/1000Mbit networks
Power supply included
Can be powered with 52-56VDC / 122Watt
Pin 4/5 +, 7/8 - (Mid-span)
Dimensions: 97 x 70 x 26 mm
Temp: -10 - +70°C
With this mid span injector, PoE network devices such as surveillance cameras, IP phones, access points etc. power is supplied via the network cable even if the switch does not support PoE. This injector is inserted between the switch and network devices and supplies voltage to the network cable.
TILBEHØR: KØLER/ FAN TIL ETH-POE24x POE INJECTOR
Built 100-240V AC power supply
POC - Power Over Cable power
Meets NOT PoE specifications.
Constant voltage out.
2 x RJ45 ports - data input and data + voltage output
output voltage: DC 48V 0.5A
DC output: + (4.5) - (7.8)
Data: 1,2,3,6
Dimensions: 82 x 44 x 55 mm ( LxWxH)
Weight: 104g
4 x RJ45 port with PoE ++ (Ultra PoE)
1 x RJ 45 Uplink port (not PoE).
60W for every PoE-Port
Power Budget is 120 watts
IEEE 802.3at / by PoE.
Dip on / off PoE
Power supply: 100 - 240VAC
Operating temperature: 0 - +40°C
Size: 119 x 88 x 27 mm
Weight: 1.3 kg
PoE ULTRA Power Supply via Ethernet Cable, 60 Watt
Output Voltage: 50 - 57VDC 1.2Amp
Supporter Mid-span and End-span
Using the 4 x Pair for PoE voltage