100Mbit Ethernetkort med fiber, SC. Fast Ethernet Fiber NIC with PCI Express
Fast Ethernet Fiber NIC with PCI Express.
- High bandwidth 100Mbps Network Speed
- Supports Full-Duplex Mode
- Supports IEEE 802.3x Full-Duplex Flow Control
- Supports PCI e x1 bus
- Compliant with PCIe Rev.1.1 Interface
- Supports Jumbo Frame
- Supports High Level VLAN Filtering Function
- Supports IP headers and TCP / UDP checksums offload
- Supports on-board screening of VLAN tagged Ethernet frames
- Supports Wake on LAN
- Supports ASF 2.0
1,470.00 kr
Excl. VAT
Quantity
Physically in stock
Product number ETH32FIBER-SC-U+
Technical Specification
Standards: IEEE 802.3u Fast Ethernet 100Base-FX
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.1Q VLANs
Connector: 1310nm SC multi-mode (Default)
1310nm LC multi-mode
1310nm SC, LC single-mode
1550nm SC, LC single-mode
Option is available upon request
Fiber Optic Cable: 62.5/125, 50/125mm multi-mode
9/125mm single-mode
Data Transfer Mode/Speed:
Full duplex with flow control
100Mbps speed
Diagnostics LED on Bracket:
LINK/ACT
FDX
Bus Slot: PCIe 1.1 Compliant
Power Requirement: Max. 52.4W, + 3.3VDC@ 1.50.7A
Ambient Temperature: 0° to 50°C
Humidity: 5% to 90%
PCB Dimensions: 108(L) x 68.5(H) mm
Weight 0.05Kg
Emission: Comply with FCC Part 15 Class B & CE Mark Approval
Software Support:
Windows 98/ME
Windows 2003 Server
Windows 2008 Server
Windows XP
Vista
Windows 7
Novell Netware 5.x, 6.x
Linux
PXE & RPL Boot ROM
Other products in same category:
1 serielportserver port RS232 / 422/485, DE-MOXA 211 Serial Device Server
External COM ports via Ethernet and Internet
3-in-1 Serial Port: RS-232, RS-422, OR RS-485
Modes: TCP Server, TCP Client, UDP
Ethernet Modem
Pair Connection
Real Com / Tty Drivers for Windows and Linux
2-wire RS-485 with Patented Automatic Data Direction Control (Addc®)
Built-in 15 kV ESD Protection for All Serial Signal
1,355.00 kr
Item Number: ETH1SER+
2 Ports seriesport server with RS232, Moxa Nport 5210A. Serial Device Server with 2 x DB9 he
External COM ports via Ethernet and Internet
Compact and but finding room for
Socket Modes: TCP Server / TCP Client / UDP
Windows Utility for Configuring Multiple Device Servers
Supports 10 / 100m Ethernet
2 x DB9 male
SNMP MIB-II for Network Management
Power supply included
2,202.00 kr
Item Number: ETH2SER232+DB9
RS232 for RS485 or RS422 Converter, Galvanically Isolated, Baud Rate from 50 - 921.6 Kbit/S, MOXA TCC -100I
Industrial RS232 to 422/RS485 Serial Converter/ Repeater with 2 KV Isolation, MOXA TCC-100i
RS-232 to RS-422 conversion with RTS/CTS support
RS-232 to 2-wire or 4-wire RS-485 conversion
2 KV isolation protection (TCC-100I/TCC-100I-T)
Wall and DIN-rail mounting
Plug-in terminal block for easy RS-422/485 wiring
LED indicators for power, Tx, Rx
-20 to 60°C operating temperature
1,502.00 kr
Item Number: CNV232I485M-OPT
Internal USB to RS232 converter card with 5V on DB9
Two 16550 High performance UART (RS232) serial channels
Occupies one PCI or PCIe bus slot
Low Profile PCI Form Factor
Includes Low Profile PCI & Regular size PCI two brackets
Both USB A type and USB pin header connector on board to host connection
One RS232 DB9M and one RS232 10pin RJ45 serial ports on board
Includes one 10pin RJ45 – DB9M Bridge cable for 2nd DB9M port
5VDC Power output from each DB9M Port for POS device use application
2 Jumpers Individually enable / disable 5VDC output for each DM9M Port
On Board Molex mini 4Pin Power connector for sufficient DB9M 5V bus power from PC power supply
Supports 32bit/64bit Windows 7, Vista, XP, 2000, ME, 98SE
178.00 kr
Item Number: CNV-USB-RS232INT
Previous
Next







