Ethernet PoE Adapter. Passive DC injector & splitter cable, set, white
PoE adapter
DC injector / splitter cable
Supports 5/12/24 / 48V
Range: Up to 40m
Dimensions DC plug: 5.5 / 2.1mm
Length cable : 15cm
Set of 2 pcs. cables - injector and splitter
153.00 kr
Excl. VAT
Quantity
Physically in stock
Product number K-POE-SPLIT
Specifications
| Kabel | 15 cm |
|---|
PoE adapter cable. Passive DC injector / splitter cable.
DC splitter cable such as. can be used for wireless access points, CCTV IP video surveillance.
Set of two. 15 cm long cables with RJ45 male and its connectors at the ends, mounted on a cable with respectively. A 5.5mm DC male connector and female connector.
Legs 4 and 5 on the RJ45 female connectors are connected to the center conductor and pins 7 and 8 are connected to the outer conductor of the DC connectors. a DC supply voltage but does not comply with the 802.3af / at the standards of PoE.
Other products in same category:
Poe Extender. 1 x PoE++ in and 2 x PoE+ out. Split PoE out to 2 PoE PD units, 30 watts each. IP67 and IK10 Vandal Proof
Gigabit PoE and data Extender PoE splitter
1 x RJ45 Data + PoE ++ input
2 x RJ45 Data + PoE + outputs
Standard: IEEE 802.3bt and 802.3at
from injector to Extender up to 100 meters
from Extender to PD Devices Up to 100 meters
IP67 Aluminum Molded cabinet
Temperature range: -40 - + 75 ° C
Plug Play
Wall fittings
Size: 170 X 44 x 73 mm with cable gland
1,863.00 kr
Item Number: ETH-POE-BOOST-2G-U
PoE Extender. 1 x PoE + in and 2 x PoE + out. Split PoE into 2 PoE PD units, 25 watts in total
Gigabit PoE and Data Extender / splitter
1 x RJ45 data + PoE + input
2 x RJ45 data + PoE + outputs
Standard: IEEE 802.3af and 802.3at
From Injector to Extender up to 100 meters
From Extender out to PD devices up to 100 meters
Wall mounting
Plug & Play
Temperature range: 0- + 50 ° C
Dimensions: 140 x 77 x 28 mm
Weight: 234g
970.00 kr
Item Number: ETH-POE-BOOST-2G
PoE Splitter RJ45, 5V/3A, 9V/2.5A, 12V/2.5A, 18V/1.6A, 10/100/1000Mbit,
PoE splitter with voltage selector for 5, 9.12.18 Volts
Up to max. 30W
IEEE 602.3af/at(POE) IEEE 802.3 (Ethernet)
IEEE 802.3U, IEEE 802.3ab (Gigabit Ethernet)
1 x 10/100/1000 Mbit RJ45 PoE port (data + power input)
1 x 10/100/1000 Mbit RJ45 LAN port (data only)
1 x DC plug 5.5 / 2.1 mm - Output voltage (DC out)
Cat. 5E, 6 UTP
DC voltage from PoE switch or Injector 36 to 57 VDC
2 x RJ45 Note PoE does not go back to the RJ45 output - only data!
ROHS, CE, FCC (FCC Part15, Class B)
330.00 kr
Item Number: ETH-POE5-18V
PoE++ extender / Extender over CAT. 5/6/7/8, Up to 200 meters, 4 PoE+ outputs
10/100/1000Mbit network extender / PoE splitter
1 x PoE input (PD) PoE++ 95W
4 x PoE outputs (PSE) PoE+ 32W
Up to 32W per PoE port, 65W total power budget (see specifications)
Extend the network cable over the maximum 100 meters for PoE solutions
Extenders are powered by PoE and pass PoE on to the next extender
Dimensions: 168 x 93 x 32 mm, Weight: 403g
1,150.00 kr
Item Number: ETH-POE-BOOST-4G
Previous
Next







