PoE Tester for units over PoE network

Quick and Easy PoE tester
IEEE 802.3af / at
UTP Cat 5 or above
100 meters max.
Dimensions: 23 x 70.1 x 22 mm | Operating temperature: -10 ~ 60 C
weight: 20g

POE-TESTER
204.00 DKK
Tax excluded
Quantity
Physically in stock  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

Quick and easy test to RJ-45 for Power Ethernet test on a second. POE-TESTER is a user PoE diagnosis adapter for network installers, corporate MIS and even home users to quickly identify the existence of Power over Ethernet Application network. It is designed to detect whether IEEE 802.3af / at PoE voltage runs over UTP cable and identifies the type of PSE (power source equipment) for troubleshooting.
Connect the POE-TESTER for PSE or RJ-45 socket and the LED lights up when it detects PoE voltage via UTP cable and identifies that the PSE is between voltage end tension or even the past four pairs 60 watt ultra PoE on a second.
POE-TESTER provide two LEDs for quick and easy identification of the PSE state. A Power over Ethernet system comprises a PSE (Power Sourcing Equipment) and a PD (Powered Device). PSE is a device that supplies power in a PoE setup. There are two types of PSE, Mode A and Mode B. PSE can be either a Mode A, end-span PoE switch or Mode B, mid-span PoE injector. PD is a PoE-enabled terminal of PSE and consumes energy, such as IP network cameras, VoIP phones and wireless access points.

Dimensioner
23 x 70.1 x 22 mm
I/O
1 x RJ45
Kabel
UTP, cat 5 eller derover. maks 100 meter
PoE
IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus
Weight
20g

4 other products in the same category:

POE extender, up to 100...

POE extender, up to 100 meters, RJ45

Power over Ethernet - No Additional Power Source Required
Extend a POE signal max. 100m over a single CAT cable (cat 5 or higher)

Price 682.00 DKK
Product code: ETH-EXT-POE
Physically in stock  
Quick view
PoE++ Splitter with...

PoE++ Splitter with 12VDC/5.8A or 24VDC/2.2A output voltage. 802.3at/bt. Gigabit.

PoE++ splitter - separate DC and Data
Data without PoE to equipment
DC voltage output to non-PoE device
Max. 70 Watt
Data is 10/100/1000Mbit/s
PoE 802.3at/bt
End-span + Mid-span
End-span or Mid-span
2  x RJ45 interfaces
1 x RJ45 port Data + Power input
1 x RJ45 port Data output
2 x DC output (4-pin terminal block)
DC output 12VDC or 24VDC w/DIP switch
Size: 135 x 88 x 32 mm
DIN-mount
Weight: 445g

Price 1,545.00 DKK
Product code: ETH-POE++12-24-D
On the way in  
Quick view
IP67 tight Gigabit PoE++...

IP67 tight Gigabit PoE++ injector (60W) PoE + Data. 24 -56VDC input

IP67 and IK10 Gbit PoE injector for outdoor mounting
PoE++ (60W) injector for PoE equipment
1 x RJ45 port for PoE++ out Data+PoE
1 x RJ45 port Data in
1 x Phoenix connector for the input voltage
DC24V 72W input
DC36V 71W input
DC54V 66W input
PoE standard: IEEE 802.3at/bt (PoE++)
PoE out Mid-span / End-span
Operating temperature: -40 - +75°C
Wall bracket
Dimensions: 170 x 73 x 44 mm
Weight: 425

Price 1,322.00 DKK
Product code: ETH-POE++INJ-WP
On the way in  
Quick view