PoE Tester for units over PoE network
Quick and Easy PoE tester
IEEE 802.3af / at
UTP Cat 5 or above
100 meters max.
Dimensions: 23 x 70.1 x 22 mm | Operating temperature: -10 ~ 60 C
weight: 20g
204.00 kr
Excl. VAT
Quantity
Physically in stock
Product number POE-TESTER
Specifications
Dimensioner | 23 x 70.1 x 22 mm |
---|---|
I/O | 1 x RJ45 |
Kabel | UTP, cat 5 eller derover. maks 100 meter |
PoE | IEEE 802.3af Power over Ethernet IEEE 802.3at Power over Ethernet Plus |
Weight | 20g |
Quick and easy test to RJ-45 for Power Ethernet test on a second. POE-TESTER is a user PoE diagnosis adapter for network installers, corporate MIS and even home users to quickly identify the existence of Power over Ethernet Application network. It is designed to detect whether IEEE 802.3af / at PoE voltage runs over UTP cable and identifies the type of PSE (power source equipment) for troubleshooting.
Connect the POE-TESTER for PSE or RJ-45 socket and the LED lights up when it detects PoE voltage via UTP cable and identifies that the PSE is between voltage end tension or even the past four pairs 60 watt ultra PoE on a second.
POE-TESTER provide two LEDs for quick and easy identification of the PSE state. A Power over Ethernet system comprises a PSE (Power Sourcing Equipment) and a PD (Powered Device). PSE is a device that supplies power in a PoE setup. There are two types of PSE, Mode A and Mode B. PSE can be either a Mode A, end-span PoE switch or Mode B, mid-span PoE injector. PD is a PoE-enabled terminal of PSE and consumes energy, such as IP network cameras, VoIP phones and wireless access points.
Andre produkter i samme kategori:
Poe Extender. 1 x PoE++ in and 2 x PoE+ out. Split PoE out to 2 PoE PD units, 30 watts each. IP67 and IK10 Vandal Proof
Gigabit PoE and data Extender PoE splitter
1 x RJ45 Data + PoE ++ input
2 x RJ45 Data + PoE + outputs
Standard: IEEE 802.3bt and 802.3at
from injector to Extender up to 100 meters
from Extender to PD Devices Up to 100 meters
IP67 Aluminum Molded cabinet
Temperature range: -40 - + 75 ° C
Plug Play
Wall fittings
Size: 170 X 44 x 73 mm with cable gland
1,863.00 kr
Item Number: ETH-POE-BOOST-2G-U
PoE Extender. 1 x PoE + in and 2 x PoE + out. Split PoE into 2 PoE PD units, 25 watts in total
Gigabit PoE and Data Extender / splitter
1 x RJ45 data + PoE + input
2 x RJ45 data + PoE + outputs
Standard: IEEE 802.3af and 802.3at
From Injector to Extender up to 100 meters
From Extender out to PD devices up to 100 meters
Wall mounting
Plug & Play
Temperature range: 0- + 50 ° C
Dimensions: 140 x 77 x 28 mm
Weight: 234g
970.00 kr
Item Number: ETH-POE-BOOST-2G
PoE Splitter RJ45, 5V/3A, 9V/2.5A, 12V/2.5A, 18V/1.6A, 10/100/1000Mbit,
PoE splitter with voltage selector for 5, 9.12.18 Volts
Up to max. 30W
IEEE 602.3af/at(POE) IEEE 802.3 (Ethernet)
IEEE 802.3U, IEEE 802.3ab (Gigabit Ethernet)
1 x 10/100/1000 Mbit RJ45 PoE port (data + power input)
1 x 10/100/1000 Mbit RJ45 LAN port (data only)
1 x DC plug 5.5 / 2.1 mm - Output voltage (DC out)
Cat. 5E, 6 UTP
DC voltage from PoE switch or Injector 36 to 57 VDC
2 x RJ45 Note PoE does not go back to the RJ45 output - only data!
ROHS, CE, FCC (FCC Part15, Class B)
330.00 kr
Item Number: ETH-POE5-18V
PoE++ extender / Extender over CAT. 5/6/7/8, Up to 200 meters, 4 PoE+ outputs
10/100/1000Mbit network extender / PoE splitter
1 x PoE input (PD) PoE++ 95W
4 x PoE outputs (PSE) PoE+ 32W
Up to 32W per PoE port, 65W total power budget (see specifications)
Extend the network cable over the maximum 100 meters for PoE solutions
Extenders are powered by PoE and pass PoE on to the next extender
Dimensions: 168 x 93 x 32 mm, Weight: 403g
1,150.00 kr
Item Number: ETH-POE-BOOST-4G
Previous
Next