Welcome to DANBIT IT Professionals

B2B – Business to business only

Shopping Cart $0.00

CALL US NOW: +45 56 66 20 20

S0 pulse counter with MODBUS RTU, RS485, S0 Standard 62053-31

4-channel S0 pulse counter with MODBUS RTU, RS485, S0 Standard 62053-31, for Teracom data loggers

Name: 4-channel S0 pulse counter with MODBUS RTU, RS485, S0 Standard 62053-31, for Teracom data loggers
Brand: Danbit A/S
SKU: TDI340
Price: 160.45 USD
Availability: BackOrder

Remote data collection, remote meter monitoring, energy management

Energy meter interface module with MODBUS RTU

RS-485 interface with up to 63 devices per BUS

Built-in 120 ohm termination resistor

Flash memory for data and setup

Voltage supply from 5 to 30VDC, 50mA at 5VDC

Galvanically isolated digital inputs - 10mS polling rate

Optional inputs: Open/Closed (dry contact and 32 bit counter)

S0 pulse counter applications:

Remote monitoring of electricity meters

Industrial process control

Remote monitoring of gas meters and water meters

Monitoring of devices with S0 outputs;

Process monitoring

DIN rail mounting

Firmware update via interface.

Dimensions: 35 x 86 x 59 mm

$160.45

Excl. VAT

Quantity

On the way in

Product number TDI340

Get Volume Offer DOWNLOADS

Ask a question

Download PDF

TDI340 is an S0 pulse counter with MODBUS RTU interface. It has 4 isolated digital inputs that comply with S0 standard 62053-31. The S0 pulse counter operates in polling or level-change mode. In level-change mode, the module can be set to count on rising, falling and both level changes. The device is a dedicated S0 pulse counter, but it also provides simultaneous readings for the state of digital inputs - OPEN/CLOSE.

Independent delays for transitions from low to high and high to low can be used. These delays can be from 0 to 656 seconds in 10mS steps and work if the counter for the corresponding digital input is in polling mode.

Download technical info from the manufacturer's website:

https://www.teracomsystems.com/sensors/s0-pulse-counter-modbus-rtu-tdi340/

12VDC 1.5Amp (18Watt) power adapter from 110 - 240VAC, plug 5.5 / 2.1mm

Mains adapter - switch mode type
110-240 VAC to 12VDC/1.5A
DC plug: 5.5/2.1 mm
1 meter cable

$28.84

Item Number: DC12V/1.5A-R-Q

Physically in stock

Remote monitor over Ethernet with 24 input ports. 4 Digital input, S0. 6 x analog input. RS485. Modbusrtu to Modbus TCP. SNMP

Multi input Data logger for up to 70000 loggings

10/100 Mbit Ethernet

Password-protected, web-based configuration and control

4 digital inputs, compatible with S0 pulse interface

6 analog inputs with 0/10V and 0/20mA

MODBUS RTU interface for up to 24 sensors (registers)

Up to 24 channels for monitoring

Up to 24 independent alarms

SNMP v.2 support - SNMP Trap - alarm notifications

HTTP and SNMP port change - HTTP API commands

Periodic HTTP posting of XML/JSON status files to client-server systems

MODBUS TCP/IP support

Dynamic DNS with DynDNS, No-IP and DNS-O-Matic support

NTP protocol support

Supply voltage: 10 to 28V DC

$408.46

Item Number: TCW260

Physically in stock

Other products in same category:

Remote control via Internet/LAN, 1 x Digital input, 8 x Relay outputs, 10 - 14VDC

Module with password protected Web based configuration and control

1 x digital input with "dry contact" or "logic level" mode (max. 5.5VDC)

8 x relay outputs with NO/NC contacts (3Amp)

SNMP v.1 support

SNMP traps conditional alarm sending

Email transmission upon alarm

SMTP with authentication (SSL/TLS is not supported)

XML and HTTP API commands

Remote firmware update

Robust DIN-Rail/wall mounting.

Supply voltage: 10 - 14VDC

$175.68

Item Number: TCW181B-CM

On the way in

Data logger for temperature and humidity via Internet/LAN, sensor interface RS485 or 1-wire, additional sensors

Data logger for external temperature and humidity sensors
Sensors are not included - must be purchased separately, see selection
Memory for 70,000 measurements
Temperature, humidity and dew point can be displayed graphically
1-Wire and RS485 sensor interface
Up to 8 Teracom sensors can be connected
MODBUS TCP/IP support
SNMP v2 with trap alarm for 5 email recipients
Secure email
XML/JSON and HTTP API commands for client-server
Dynamic DNS, DynDNS, No-IP and DNS-O-Matic
NTP support for time synchronization
Remote firmware update
Supply voltage: 10 - 32VDC - purchase PSU

$232.48

Item Number: TCW210-TH

On the way in

Temperature and moisture meter with 1-wire. -20 - +60 ° C, 5 - 95%rh. 12-16bit resolution. IP54 Robust House

1-wire Combi Sensor
Temperature: -20 - +60 ° C +/- 0.6 ° C
Resolution: 0.1 ° C
Humidity (Moisture): 5 -95% Rh +/- 5%
Resolution 0.1%Rh
IP54 Plastic housing, very sturdy
Up to 8 sensors on the same 1-wire
16 bits at temperature
12 bits at moisture
Supply Voltage: 4.5 / 25mW
Dimensions: 74 x 66 x 36 mm

$222.53

Item Number: TSH230

Physically in stock

4G LTE alarm and remote control, 2 x Digital input, 2 x Analog, 2 x Relay output, 1-wire to sensor, MQTT, 8 - 28VDC

GSM/LTE alarm - 4G

Configuration via USB (Windows program) or SMS

2 x digital inputs with "dry contact" or "logic level" mode

2 x analog inputs from 0 to 60VDC, 10 bits

2 x relay outputs with NO/NC contacts

1-Wire interface for 4 Teracom temperature and humidity sensors

Input can be navigated with alarm text etc.

SMS alarm - up to 5 numbers

Email alert - up to 5 email recipients, SMTP with TLS support

1 relay can be activated with calls from up to 100 phone numbers

Push mode – XML data is sent via HTTP Post to a remote server. Response from server may contain relay setup.

MQTT 3.1.1 support

Firmware update "over the air"

Supply voltage: 8 - 28VDC, 2Watt - optional PSU

Dimensions: 109 x 65 x 32 mm

Weight: 152g

$323.84

Item Number: TCG120-4E

Physically in stock

Temperature and humidity sensor with RS485, -20 to +65°C, 10-90%rH, MODBUS, cascade connection

Combi sensor for temperature and humidity measurement

Modbus RTU

2 x RJ45 connectors - with daisy chain to next module

RS485 Bus to Controller.

Up to 32 devices can be connected to the Controller

3.0% relative humidity measurement accuracy

12 bit resolution for moisture measurement

14 bit resolution for temperature measurement

With mounting flanges

Excellent long-term stability

Each module has its own ID code

$128.25

Item Number: TSH300

Physically in stock

4G LTE alarm and remote control, M2M, Datalogger, I/O with Digital and Analog, 1-wire, Relay, MODBUS, 10 - 28VDC

Multi-band 4G LTE Cat.1 controller, logger and alarm

Setup via USB, SMS and HTTP API

USB setup - use USB cable with Mini B male

2 digital “dry contacts”. High on contact

4 analog inputs, 0 - 10VDC or 4-20mA input (10bit)

4 relay outputs, COM, NO and NC

1-Wire input for up to 8 Teracom sensors

1 x RS485 for max. 8 MODBUS RTU sensors

Data logger with 70,000 loggings

Upload data to HTTP/HTTPS Post in XML/JSON

SMS alarm and Email alarm for 5 recipients

Push mode – XML data is sent via HTTP Post to a remote server. Response from server may contain relay setup.

10 to 28VDC, 370mA @ 12VDC - optional PSU

Dimensions: 158 x 119 x 34 mm

Weight: 470g

Temperature: -20 - +55°C

$402.60

Item Number: TCG140-4E

Physically in stock

Smoke alarm with a diameter of 15 meters, white, 10 - 30 VDC. With relay output for alarm unit

Smoke alarm with a diameter of 15 meters
installation up to 11 meters high
With potential-free relay contact
Smoke sensitivity: EN 54-7:2000+ A1:2002
Operating temperature: -10 to +55 °C
Dimensions: Ø100 mm, h 47 mm
Weight: 100 g

$59.88

Item Number: TSS8030R

Physically in stock

GSM alarm and remote control, data logger, I/O with digital and analog, relay, Modbus, 12 - 24VDC. Only for 2G.

GSM-alarm - ONLT FOR 2G
Setup via USB with Windows setup program, SMS and HTTP API
2 digital "dry contact" inputs
2 analog inputs, 0 - 10VDC - with resistance can be changed to input
2 mA analog inputs, 0 -10VDC or 0-20mA, 10bit (WEB control)
4 relay outputs, NO and NC
1-wire input for up to 8 Teracom sensors
RS485 interface for max. 8 MODBUS RTU sensors
data logger with memory for 70,000 logs
Upload data to HTTP Server
SMS alert to max. 5 recipients
Email alert for max. 5 receivers (SMTP with TLS support)
relay outputs with calls
12 to 24VDC, 350mA @ 12VDC - acquisitions PSU

$247.12

Item Number: TCG140

Physically in stock

4-channel S0 pulse counter with MODBUS RTU, RS485, S0 Standard 62053-31, for Teracom data loggers

Other products in same category:

Company

Contact Us

Your Account

Get Smarter

Newsletter

4-channel S0 pulse counter with MODBUS RTU, RS485, S0 Standard 62053-31, for Teracom data loggers

Get Volume Offer

Stil et spørgsmål

Other products in same category:

Company

Contact Us

Your Account

Get Smarter

Newsletter