USB to RS485 converter, isolated
1 x RS485 7-pin terminal block
1 x USB-B
Speed: 300 ~ 115200 bps
For USB 1.1 / 2.0 (High Speed)
2500 VDC isolation on RS485 side
To DIN rail mounting
No external power supply required
Input +5 VDC from USB port
OS support WIN 98 / ME / 2000 / XP (32 / 64- bit) / Vista (32/64-bit) / 7 (32/64-bit) / 8 (32/64-bit) / 10 / Linux
Operating temp. -25 ° C ~ +75 ° C
USB cable (1.8m) included
The tM-7561 is a cost-effective USB to RS-485 converter. Connecting the tM-7561 to a PC, you get one RS-485 port that allows you to access RS-485 devices through the USB interface. Like the I-7520, the tM-7561 contains "Self-Tuner" chip auto-tunes the baud rate and data format to the RS-485 network. The tM-7561 module derives its power from the USB port and doesn't need external power adapter.
Get 2 pcs. COM ports on the PC through USB port
Separate USB cable AM and BM
Supporting Win7 / 8
Cable included
Adds a high speed RS422 or RS485 serial port by connecting to a USB port
USB Type-C cable, 0,25m
Powered by USB port, no external power adapter required
LEDs indicate TxD and RxD for easy port monitoring and diagnosis
Installs as a standard Windows COM port
Automatic transmit and receive control for 2-wire RS485 half-duplex mode
Serial port protected with surge protection of 15kV
Non-standard baudrates supported
Easy plug and play installation and RS-422/RS485 device connection
High speed serial port with baud rate up to 3Mbps
Provides 15KV ESD protection and 600W surge protection for all serial signals
Supports Windows XP to 11, Server 2000 to Server 2022 (WHQL certified)
Supports Linux Kernel 3.0 and above
Supports Mac OS X 10.3 and above, driver signed by Apple
USB-C to Straight-Through RS232 serial adapter
With DB9 male
With 9 x data monitoring LEDs (TX, RX, PWR)
COM port assignments are maintained across reboots
Max Baud Rate: 921.6 Kbps | 1, 1.5, 2 stop bits
Odd, Even, Field, Space, No Parity Mode
Hardware Flow Control (CTS/RTS and/or DSR/DTR)
Software Flow Control (XON/XOFF) | Chipset: PL2303-GC
Compatible with Windows®, Mac OS and Linux
RS232 for USB printer adapter cable
connect USB printer to PC com port
automatic baud rate
power supply included
DB9 female and USB B
Supply voltage: 5VDC 100mA
GDI printers (without own emulation) are not supported
See list of supported printers under Downloads
