USB printer connects to RS232 port - DB9 female to USB B, 1.8 meter cable. The converter is only for specific USB printers
RS232 for USB printer adapter cable
connect USB printer to PC com port
automatic baud rate
power supply included
DB9 female and USB B
Supply voltage: 5VDC 100mA
GDI printers (without own emulation) are not supported
See list of supported printers under Downloads
1,900 kr
Excl. VAT
Quantity
Physically in stock
Product number CNV-USBB-RS232
Adapter used to connect printers / multifunction printerers with a PC's COM port (Serial Interface)
for example. On laboratories, control panels, pharmaceutical equipment or products with serial interface for serial printer, where the printer is replaced with a printer only with USB port. The adapter can only be used on the printers specified in the printer list - found during downloads.
Connector:
1 x 9-pole sub-d She
1 x USB-B Han
Power Supply: 110-240V / 50 / 60Hz
output 5volt / 100 mA
Cable length: 1.8m
USB - Interface
USB USB1.0 Low-Speed
USB1.1 Low / Full-speed
USB2.0 Low / Full-speed
Purpose: Only for USB Printer
Speed 2400-115200 Baud
Protocol: None, RTS / CTS, Xon / Xof < Br> Parity: None, Odd, Even
Data Bit: 7.8
Stop Bits: 1,2
Class: Printer
Class: Hub
Andre produkter i samme kategori:
CAN bus to USB adapter. Connects a PC with USB port to CAN Bus. CAN 2.0A and CAN 2.0B up to 1Mbps
CAN bus port on your computer via USB 1.1, 2.0 or 3.0 port
Powered from USB port
LED shows initialization and CAN bus status
Installs as a standard Windows COM port
CAN modes: Standard, Listen, Echo
Controlled using ASCII commands
API provided along with examples
Plug and play installation
CAN bus speed up to 1 Mbps
Supports CAN 2.0A and CAN 2.0B protocols
Drivers provided for Windows and Linux OS
Supports SocketCAN (slcan driver) since kernel 2.6.38+
1,132 kr
Item Number: CNV-USB-CAN
USB to 1 x RS232 adapter - get a COM port on the PC via the USB port. FTDI chip. With threaded bushing for COM cable
RS232 - 08/07 bit
Max. 115.2 kbit / s
FTDI chip - FT232xx.
Does not work with software license dongles
With internal jumper getting + 5VDC on pin 9
1 meter USB cable
Supports Win10 < / p>
455 kr
Item Number: CNV-USB-SER9T
Internal USB to RS232 converter card with 5V on DB9
Two 16550 High performance UART (RS232) serial channels
Occupies one PCI or PCIe bus slot
Low Profile PCI Form Factor
Includes Low Profile PCI & Regular size PCI two brackets
Both USB A type and USB pin header connector on board to host connection
One RS232 DB9M and one RS232 10pin RJ45 serial ports on board
Includes one 10pin RJ45 – DB9M Bridge cable for 2nd DB9M port
5VDC Power output from each DB9M Port for POS device use application
2 Jumpers Individually enable / disable 5VDC output for each DM9M Port
On Board Molex mini 4Pin Power connector for sufficient DB9M 5V bus power from PC power supply
Supports 32bit/64bit Windows 7, Vista, XP, 2000, ME, 98SE
178 kr
Item Number: CNV-USB-RS232INT
USB to 1 x RS232 / RS422 / RS485 adapter. 300 - 921.6kbit. Complies with COM signals +/-11Volt. Galvanically isolated
Serial to USB converter with 1 x RS232/422/485 port
Respects +/- 11volt data signals
Galvanically isolated on the RSxxx output
Self-tuner Baud Rate
Automatic direction control
Powered from the USB port
USB connector: Type B
Supports USB 1.1, 2.0 and 3.0
COM port: terminal block
1,311 kr
Item Number: M485-USB-I
Previous
Next