BNC male connector with screw clamp. BNC male for cable adapter with 2 screw clamps
BNC male connector extends through the two screw clamps.
Subcategories
BNC male connector extends through the two screw clamps.
VGA female connector with 16 pin screw terminal block
DB9F plint med ben 1-5 ledningen genom
DB9 HAN connector
RS232 with terminal block 1-9 screw terminals
Can be used for RS232/485/422
With plastic protection Open/close
With thumb screws
Power Jack male connector 5.5/2.1mm screw terminal block.
Connects loose wires.
Forlængerkabel med DB37 han til DB37 hun stik
AWG28
Guldbelagte stik
Cable with DB37 male / male
AWG28
Gold-plated connector
For terminal card
Gray
1.8m
100 screw terminal terminals
1 x 100 pin SCSI-II connector
For DIN rail mounting
Cable available as an accessory
158 x 120 x 52 mm (B x L x H)
Double terminal board with 2 x 20 screw terminals
2 x 20 pole IDC male connector
For DIN rail mounting
Incl. x 1m flat cable IDC20 female to IDC20 female
148 x 70 mm (W x L)
Terminal board with 24 x opto-insulated inputs
1.4 m cable with 2 x IDC50 connectors included
Dimension: 213mm x 132mm
Interface Terminal board with 24 x power relay
8 switch relay
16 x connect relay
incl. 1.4 m cable with 2 x IDC50 connectors
Dimension: 130 x 220 mm
24 channel relay output terminal card
24 x relay relay
50-pin Opto-22 plug
Dimension: 220mm X 130mm
Terminal cards with 25 and 10 screw terminals
DIN-Rail Mounting
9-pin D-sub connector
25-pin D-sub connector
Pin to Pin screw terminal
Dimension: 148mm x 76mm
Terminal card with screw terminals
IDC 34 male flat cable of 0.5m included
For DIN rail mounting
195 x 90 mm (W x L)
Active Terminal Cards
Input Levels: Logical 0: 0-0.8, Logical 1: 5 - 30 V
8 End Phrases 250 VAC 6 A
DB25 Male
30 x 100 x 160 mm
Adlink DIN-50P-01
Terminal Boards
On-board Connector
1 x 50-pin SCSI II
103 x 85 x 43 mm (W x L x H)
Adlink DIN-68S-01
Terminal Boards
On-board Connector
68-pin SCSI-II female
103 x 85 x 46.2 mm (W x L x H)
Adlink DIN-50S-01 (G)
Terminal card with screw terminals
50 pin SCSI II female connector
For DIN rail mounting
125 x 85 x 50 mm (W x L x H)
Terminal card with screw terminals
DB37 male / female cable of 1.8m included
For DIN rail mounting
103 x 85 x 50 mm (W x L)
Adapter med DC hun 2.1mm til DC han 2.5mm tilpasningsstik
37 pole terminal card
37 banana, 4mm connector
Terminal block
37-polet terminalkort
16 stk. BNC 3
37 banan 4mm stik
Phenix 4 pole terminal connector
Flat cable
2 x IDC50 female connector at each end
Gray
1.5m
Passer til USB-DIO24
Power Jack female connector 5.5/2.1mm screw terminal block.
Connects loose wires.
Power Jack female connector 5.5/2.5mm screw terminal block.
Connects loose wires.
Power Jack male connector 5.5/2.1mm terminal block with push-down clamp.
Connects loose wires.
Power Jack female connector 5.5/2.1mm terminal block with push-down clamp.
Connects loose wires.
Power Jack female connector 5.5/2.5 mm terminal block with push-down clamp.
Connects loose wires.
Power Jack male connector 5.5/2.5mm terminal block with push-down clamp.
Connects loose wires.
Power Jack male connector 5.5/2.5mm screw terminal block.
Connects loose wires.
Stik, adapter, terminalblok RCA hun til 2-pin
Stik, adapter, terminalblok RCA han til 2-pin
Stik, adapter, terminalblok RJ45 hun til 8-pin
Stik, adapter, terminalblok RJ45 hun til 8-pin
Moxa NP21103
DB25(M) Termininal Block Kit for RS-422/485
DC7.9 til 5.5mm Power Charger Laptop Adapter Tip Connector converter.
Til Lenovo el. IBM notebooks
24 pcs shift relay (COM, NC, NO) 250VAC and 24VDC 1Amp - 24 LEDs show relay position
Control of TTL signal (+ 5VDC is relay ON)
Supplied with +24 VDC externally
Plugs: IDC50
Dimensions: 130 x 220 mm (W x D)
Cable with DB37 male/ male
Angled
Gold-plated connector
For terminal card
Gray
1m
Extension cable with DB37 male for DB37 female connecto
AWG28
Gold-plated connector
For terminal card
Gray
5m
Adaptation cable with DB37 male/ male connector
AWG28
Gold-plated connector
For terminal card
Gray
1m
Terminal board with 2 x 13 screw terminals
DB26HD female connector
2 rows of screw terminals
Cable, accessories for TERM26F
DB26HD male - DB26HD male connector
The screen
Black
DB9 She stick
RS232 with terminal block 1-9 screw terminals
For RS232/485/422
Open/close plastic protection
With thumb screws
Terminal board with 37 screw terminals
DB37 - SUB-D she and he
For DIN rail mounting
114 x 49 x 44mm (L x W x H)
Terminal card with 37 pcs. screw terminals
Have both DB37 male and female connectors
To DIN rail mounting
Included cable of 30cm
DB9 female connector
RS232 with terminal block screw terminals 1-9 Kirke RS232 / 485/422
D-SUB 9pin
3x 4.7 x 1.8 cm (4.7cm from front of DB9 connector to back of PCB)
User kindly
DB25 he for 25 screw terminal blocks
With sheath.
Can be obtained with DB25 Female, "Nuts" nut on the DB25 plug
DB9 male connector
RS232 with 9 pins and screw terminals. RS232 / 485/422
D-SUB 9pin
3 x 4.7 x 1.8 cm (4.7 cm from the front of the DB9 connector to the back of the PCB)
2-pole screw terminal block
2EDGE 5.08mm
Suitable for industrial or embedded PCs
3-pole screw terminal block
2EDGE 5.08mm
Suitable for industrial or embedded PCs
DB9 HAN connector
Threaded screw for DB9 cable assembly
RS232 with terminal block 1-9 screw terminals
Can be used for RS232/485/422
With plastic protection Open/close
DB9 FEMALE connector
Threaded screw for DB9 cable assembly
RS232 with terminal block 1-9 screw terminals
Can be used for RS232/485/422
With plastic protection Open/close
3 Pole
Screw plug
3.81 mm
Break out board with DB15 female connector.
1 x DB15 female (2 rows)
2 x 8 pole screw terminal block
Not in the house