MAX Output 12V 0.8A or 9V 1A

USB to DC3.5mm or USB to DC5.5mm

For at forsyne 12V/0.7A skal 5V input være minimum 2A

En PC USB2.0 port giver maks. 5V/0,5A (2,5 Watt)

En PC USB3.0 port giver maks. 5V/0,9A (4,5 Watt)

Input voltage: 10 - 30VDC

Output voltage: 48VDC

Max current: 8 Amp

Overvoltage, over-current protection

Waterproof, dustproof

Voltage regulation: <1%

Ripple: 180mVp-p

Switch frequency: 50kHz

Efficiency: 95%

Dimensions: 100 x 80 x 39 mm

Flange mounting

Weight: 550g

Temperature range: -40 to + 80°C

Cable length: 16cm

Input Output 8-36VDC
12VDC 15A
Operating temperature -35 ° C to + 80 ° C
not isolated between input and output.
IP68
Overvoltage protection
Over -current protection
Over-temperature protection

MAX 12V 0.7A (8.4 Watts)
USB to 2.1x5.5 mm plug
To supply 12V/0.7A, the 5V input must be a minimum of 2A
A PC USB2.0 port provides max. 5V/0.5A (2.5 Watt)
A PC USB3.0 port provides max. 5V/0.9A (4.5 Watt)
Laptop is typically 5V/0.2A (1 Watt)
For power consumption above what a USB port can supply - use an external 5V power supply
The power is dependent on the 5V supply (P=V*A) (Power=Voltage * amps)
1 meter cable

Waterproof DC / DC converter
9-32V to 19V
5 Amp
95 Watts
90% (half load), 87% (full load)
-40 ° c ~ + 80 ° c, IP68
Overvoltage protection
Over-current protection
Over-temperature protection
Short-circuit protection
74 * 74 * 32mm
300g

DC/DC BUCK konverter fra 9-36VDC til 24VDC
Effekt: 240Watt (10Amp)
Ikke isoleret mellem indgang og udgang
Switchmode - 97% effektivitet
IP68 aluminium med epoxy sealing
Kortslutning-, overspænding- og temperaturbeskyttet
Mål: 100 x 80 x 39 mm
Vægt: 470 g 

12-25VDC to 48VDC 384Watt step-up converter
No galvanic isolation between input and output
Input from 10 - 25VDC
93% efficiency
Max. ripple full load: 170mV
No-load current: 70mA
Overvoltage and overheat protected
Aluminum metal housing with IP68 tightness
Flange mounting
Cable length: 14cm
Working temperature -40 - +80°C
Dimensions: 100 x 80 x 39mm
Weight: 500g

INPUT 8-40VDC
OUTPUT 12VDC 3A
Operating temperature -30 ° C to + 80 ° C
not isolated between input and output.
IP68
Overvoltage protection
over -Current protection
over-temperature protection

INPUT 8-40VDC
OUTPUT 12VDC 10A
Operating temperature -30 ° C to + 80 ° C
not isolated between input and output.
IP68
Overvoltage protection
over -Current protection
Over-temperature protection
Screw terminals - solder eye included
Dim: 110 x 72 x 24 mm

For flat fuses
12Vdc
splash proof hood prevent water ingress
Cable diameter 5mm
Cable total length 24CM
Delivered without fuse
MAX. 30A