RFID Reader

RFID Reader

There are 17 products.

Showing 1-17 of 17 item(s)

Active filters

  • RFID reader EM 125khz. UID...

    RFID reader EM 125khz. UID is 40 bits, 10 digit ASCII. RS232, Wiegand 26 Bit, LED, Buzzer. Waterproof. 12vdc.

    125khz RFID reader for outdoor mounting on wall
    sealed with hardened epoxy - cable mid rear
    EM4000 125khz RFID Reader for wall mounting
    reading distance 0 - 5cm, depending on roof size
    40 bit code, 10 digits ASCII (Decimal)
    RS232, only TX. GND
    9600, 0 Start, 8 Data, 1 Stop, Non Parity, FLOW: HW
    Wiegand 26bit format
    LED Indicator and Buzzer Control Manager
    Supply voltage: 12VDC / 200ma
    Cable length 1 meter (8 Core)
    Goal: 114 x 46 x 13 mm

    Price 947.00 DKK
    Product code: RFID-R10N
    Physically in stock  
  • RFID reader 125kHz EM400x,...

    RFID reader 125kHz EM400x, waterproof, 8 characters Decimal, USB Powered from USB. With fixed cable outlet at the back.

    Keyboard emulation: 8 decimal places (HID)
    frequency: 125 kHz EM 4001/4002
    Power supply: 5VDC from the USB port
    Operating temperature: -10 - +75°C 
    Humidity during operation: waterproof
    Reading range: 5 ~ 15 cm
    Cable length: 164 cm
    Dimension: 118 (L) × 75 (W) x 17 (H) mm
    Weight: 250g ± 10%
    wall mounting, water resistant

    Price 765.00 DKK
    Product code: RFID-R5USB
    On the way in  
  • RFID Duplicator, 125kHz /...

    RFID Duplicator, 125kHz / Mifare/NFC reads / writes with USB interface. Can clone UID to t5577 RW RFID TAG

    RFID Copy Reader / Writes to T5577 RW Tag
    interface: USB
    Work voltage: 5 VDC
    Work current: 200mA
    Standby Stream: 50mA
    Normal current: 100mA
    125kHz, 13,56MHz Mifare / NFC
    Compatible with CCID and PC / SC
    IC / ID Dual Frequency Replication
    Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
    Support UID, Fuid, Cuid, UFUID
    IC Semi-Encrypted Card, IC Full Encryption Card
    Dim: 108 (L) x 68 (W) x 12 mm (H)

    Price 749.00 DKK
    Product code: RFID-KOPI-USB
    Physically in stock  
  • RFID reader 125kHz EM400x,...

    RFID reader 125kHz EM400x, indoor - DECIMAL 10 digits, HID - keyboard emulation. Powered from USB. Desktop

    Keyboard emulation: 10 digits, 40bit ASCII Decimal
    frequency: 125 kHz EM 4001/4002
    Power supply: 5VDC from the USB port
    Operating temperature: -10 - + 75 ° C
    reading range: 5 ~ 15 cm
    cable length: solved USB cable
    Dimension: 118 (L) × 75 (W) x 17 (H) mm
    Weight: 250g ± 10%
    Desktop - desktop model

    Price 771.00 DKK
    Product code: RFID-R5USB-D10
    Physically in stock  
  • RFID reader 125kHz EM...

    RFID reader 125kHz EM Waterproof - DEC 8 digits, 32bit, HID - keybord emul. Pwr by the USB. outdoor model - Epoxy filled

    Keyboard emulation: 8 digits, 32bit Decimal
    Frequency: 125kHz EM4xxx
    Power supply: 5VDC from USB port
    Operating temperature : -10 - + 75 ° C
    reading range: 5 ~ 15 cm
    cable: Fixed USB cable from bottum - epoxy filled
    Dimension: 118 (L) × 75 (W) x 17 (H) mm
    Weight: 250g ± 10%
    Waterproof - IP67

    Price 916.00 DKK
    Product code: RFID-R51EUSB-D8
    On the way in  
  • Dual Band RFID reader...

    Dual Band RFID reader 125kHz, 13.56MHz, NFC, EM400x, Mifare. 8-10 characters Decimal/HEX. HID. DIP switch. USB. Waterproof

    Dual band RFID card reader for USB - Decimal
    10 characters decimal (ASCII) - 40bit
    125 kHz, 13.56 MHz, NFC
    125khz: EM4001, EM4002, EM4200
    Mifare: ISO 1443A/B/15693
    HID - Keyboard Emulation
    Reading distance: Up to 10 cm
    Align via USB
    USB interface
    Dip-SW to ID format setting - see Table 
    Environment: IP67 Waterproof, outdoor mounting
    operating temp. -25 ° to + 70 ° C
    target: 88 x 56 x 18 mm

    Price 990.00 DKK
    Product code: RFID-D51USB-D10
    Physically in stock  
  • Dual Band RFID reader...

    Dual Band RFID reader 125kHz, 13.56MHz, NFC, EM400x, Mifare. 8-10 characters Decimal/HEX. HID. DIP Switch. USB. Desktop

    Dual band RFID card reader for USB - Decimal
    10 characters decimal (ASCII) - 40bit
    125 kHz, 13.56 MHz, NFC
    125khz: EM4001, EM4002, EM4200
    Mifare: ISO 1443a / B / 15693
    HID - Keyboard Emulation
    Reading distance: Up to 10 cm
    Align via USB
    USB interface
    ID Format setting with DIP switches - see Table
    Operating Temp. -25 ° to + 70 ° C
    target: 88 x 56 x 18 mm

    Price 990.00 DKK
    Product code: RFID-D5USB-D10
    Physically in stock  
  • RFID Handheld RFID reader...

    RFID Handheld RFID reader 125kHz. For rounding guards. Memory for 14,000 readings with date and time. Incl. Guard software.

    Personell who shall document the route with the date and time
    RFID TAGs placed at check-points and has unique ID
    RFID TAG is 125kHz EM400X
    guard pointing toward Days and press the scan button
    Each TAG reading acknowledged with short vibration
    Operation with a pressure
    Journal memory: approximately 14,000 items
    battery - easy to replace
    up to 55,000 scans at full battery
    interface is USB
    Operating temperature: -10 to + 55 ° C
    Patrol Tour Manager software included

    Price 5,328.00 DKK
    Product code: RFID-PATROL-U
    On the way in  
  • 125kHz EM RFID reader with...

    125kHz EM RFID reader with USB HID. Desktop with card slot. Can be programmed as Decimal or HEX. Pre/post grades.

    125kHz EM 4xxx reader with USB
    USB HID (plug and play)
    Powered from USB
    Additional purchases from Decimal to HEX, normal or reverse
    Additions with start and or stop character
    Supports: EC standard 125kHz
    Dimensions: 100 x 65 x 23 mm
    Material: ABS
    REMEMBER: Order the desired version - additional purchase

    Price 1,003.00 DKK
    Product code: RFID-RM-G
    Physically in stock