See DANBIT's huge selection of HDMI Extender / Booster. With an HDMI extender you avoid having to pull HDMI cables long distances and risk signal degradation. It only requires you to connect the HDMI extender to your network installations. You connect the Extender to your HDMI cables, as well as your network cables, either Cat.5, Cat.6, Cat. 6 or Cat. 8. In this way, you ensure the good quality and image resolution. If you have any questions about products or prices, please contact us. We look forward to hearing from you.
HDMI VD adapter - EDID - display emulator
Understøtter op til 4K, 3840 x 2160 opløsning, @ 60Hz, 1080P @ 120Hz (HDMI2.0-support er nødvendig)
Lille størrelse med nyeste chip,
Lav effekt
Ingen varme.
Plug and Play
Hot swappable.
Understøtter alle systemer
HDMI video transmitter PoE
Suitable for video wall
With HDMI Loop Out
Delay of approx. 1 second from transmitter to receiver
HDMI 1.4a - H.264
By IP multicast use switch with IGMP Snooping
Range up to 100m
Cables Kat. 5th / 6
EDID Emulation
IR Transfer
1 x RJ45, 1 x DB-9, 1 x HDMI Input, 1 x HDMI Output
Supply IEEE 802.3af / at PoE +; 5V DC, 2A (not supplied)
As receiver, use HDMI-MULTI-HD-M
HDMI Video Receiver with PoE
Transmitter Module is purchased: HDMI-Multi-HD-T
Video Wall with a maximum of 64 units
H.264 Video Encoder / Decoder, IR transfer
Delay of approximately 1 second from transmitter to receiver
HDMI 1.4a
Connection over IP - Use switch with IGMP Snooping
Max. 64 Groups
Range Up to 100m - Point to Switch or to Transmitter
Cables Cat 6a. Good quality
Edid Emulation - possibly not on all screens, then buy it from Danbit
1 x RJ45, 1 x DB-9, 1 x HDMI exits
Supply IEEE 802.3AF / to POE + or 5V DC, 2a (not included)
Requires quality switch When used over IP
Dim: 130 x 82 x 30 mm
4K HDMI/USB video receiver PoE over LAN
Suitable for Video wall
Use Multi casting switch (IGMP Snooping)
1080p or 4K (3840 x 2160) HDMI resolution
HDMI 1.4a - approx. 0.1 second delay between transmitter and receiver
1 x RJ45, 1 x DB-9 female, 1 x HDMI female
4 x USB 2.0 type A (mouse/keyboard/USB touch)
Can be fitted up to 8 x 16 video wall
Transmitter/receiver selector - 16 channels (DIP)
Supply: IEEE 802.3af/at PoE+; 12V DC 3A (not included)
Range up to 100m over direct Cat. 5e/6 UTP cables
EDID emulation and IR transfer
As transmitter, use HDMI-MULTI4K-T
REMAINDER SALE
HDMI Booster, point to point, point to multipoint
Cascade coupling from receiver to next receiver
Set with 1 x transmitter and 1 x receiver - VDSL communication
Up to 3800 meters
Full HD 1080p
HDMI 1.4
With IR return for HDMI player
DC 12V 2A power supply
HDMI 1.3/1.4/2.0 compatible
Supports HDTV resolution up to 1080p
4Kx2K@30
Plug & Play.
Build-in LED incl.
HDMI (3D, Deep Color, CEC)
HDCP compliant
Powered from HDMI device
The diverter surge to ground
Acc. IEC 6100042 standard
Have mini USB plug for 5VDC power supply to "Pin18" - not included
HDMI pin18 is + 5VDC from the HDMI source.
Emulates screens information
Max resolution: 1920 x 1080, 2048 x 1152
With Pass Through HDMI (F) and HDMI (F)
5V DC (via USB)
Dimensions 22 x 51 x 80 mm
Active HDMI Extender to mount between 2 pcs. HDMI cable
Transfer HDMI signal up to 40 meters.
Max length HDMI cable is 20m.
Powered from the HDMI source (5VDC in the plug)
