SSD / HDD / FLASH / DVD / FDD / Media-Copy / RAID

NEW overstock

Standard 4 GB SD kort til brug i alle former for digitale enheder med SDHC kort understøttelse.

Kingston flashhukommelseskort 4 GB  microSDHC.

128GB 2.5" PATA/IDE SSD Solid State Disk (MLC Flash)
128GB SSD solid State Disk
2.5-inch PATA/IDE standard
44-pin IDE interface

Disk drives, DVD ± RW (± R DL) / DVD-RAM, 8x / 8x / 5x, USB 2.0, external

128MB Compact Flash for Industrial Use

CompactFlash for Industrial Use.

Forhandles i flere størrelser. Klik her...

Capacities from 256 MB to 32 GB on the standard IDE interface appear as normal. hard drive in BIOS.

Industriel Compact Flash, 256 MB

Industriel Compact Flash, 512 MB

Industriel Compact Flash, 64 MB

16GB CompactFlash card.
Read Speed: 19MB / s.
Write Speed: 15MB / s.
Weight: 11,5g.

Industriel Compact Flash, 8GB

HighPoint RocketRAID 640L Internal 4 SATA Port PCI-Express 2.0 x4 SATA 6Gb/s RAID Controller -Lite Version.

• PCI Express 2.0 x4
• Support RAID 0,1,5,10, JBOD
• Supports up to 4 SATA 6Gb/s and 3Gb/s HDD/SSD
• Hot-Swap and Hot-Plug
• 4x SATA 6Gb/s Ports
• Driver support for Microsoft Windows 7, 2008, Vista, and Linux distributions
• Low profile

Card Reader 8-In-One USB 3.0 Bus Powered.
2 x SD and 2 x Micro SD available
SDHC/Micro SDHC to SDHC/Micro SDHC
Compliant with the USB2.0 / 1.1 specification
Support CompactFlash Ultra DMA mode 6
Supports major memory cards including the SDXC
Plug & play simplicity
Auto detect card memory
support USB3.0 Ultra Hi speed transfer 100MB/s
Support 5Gbps Super SpeedU / 480Mbps high speed and full speed transfer rates
Supports bus powered modes

USB3 for SATA 7 + 15 pin adapter cable for SATA2.5 / 3.5 "HDD
Plug & Play and Hot Swap
Used for 2.5" SATA HDD / SSD, 3.5 "SATA HDD (use 12v DC PSU)
Supports: WIN XP, Vista / 7/8 / 8.1 / 10 and Mac

Automatisk CD/DVD brænder
30 CD/DVD’er med lukket låg eller op til 100 CD/DVD’er med åbent låg
Autoloader
PC tilslutning: USB3.0 SuperSpeed
Forsyning: 100 ~ 240VAC, 5VDC 2,5A og 12VDC 1,5A

1 to 7 duplicator
​Standalone, no PC required to operate the duplicator.
Compatible with Compact Flash card, CF1.0, CF2.0, CF3.0, CF4.0, CF4.1, CF5.0, CF6.0.
Peak transfer speeds up to 3.9GB/min. per card slot without reduce in speed.
Supports all types of data copy formats while executing bit-for-bit duplication.
Supports “Quick copy” for Linux (ext2/ext3/ext4), NTFS and FAT16/32.
Supports CFast device. (via adapter)
Can handle the largest CF card capacity on the market.

40-pin / 44-Pin IDE to Compact Flash Adapter Board FB4632 / A.

40-pin connector 2.54mm (female type) / 1 44-pin connector 2.0mm (female type)
CompactFlash socket supports (type I / II)
2-pin power connector (FB4632)
upports master / slave select jumper
Onboard access LED indicator
1 fix hole
Dimension: 56.0 mm x 40.0mm

Supports USB 3.0 and 2.0
Stand-alone hard drive copier for SATA HDD / SSD
Connect the HDD to the USB port and HDDen appear as a removable disk.
For 2½ ", 3 ½" HDD and SSD SATA disks
PC connection on the back: USB 3.0 (female)
Operation: Button held down 2-3 seconds to start cloning disks in Docking station
LED indicates the status of the copying
Accessories: USB cable included
AC adapter: 100-240 VAC, 5 V, 2 A / 12 V, 2 A included

RAID 1/0 controller
51/4 "
Interface: SATA III (6.0Gbps)
Plug and Play, Italy Hot-Swap and Auto Rebuild
4cm Silent Powerful Cooling Fan
RAID 1/0
ARAID SMART monitoring software download Scheduled backup

2.5 "SSD hard drive

SATA III 6.0GB / S (Backward Compatible to 3.0gb / s, 1.5GB / s)
TLC
Read speed up to 560 MB / s
Writing speed of up to 495 MB / s
-40 ~ 85 ℃
5V DC

Disk on module 64 GB
Standard 44-pin IDE female connector
Interface Standard ATA/IDE
ATA Secure Erase and SMART function
72-bit per 1K bytes BCH ECC
Halogen free
3.3 V ± 5% & 5 V ± 5%

new!
Last in stock

is eol

Hybrid USB for SATA, USB HDD for USB HDD, SATA for SATA Duplicator
1-1 copying
Ultra high speed up to 18GB / min
For SATA SSD, SATA HDD, USB drive, USB -HDD
USB1.1 / USB2.0 / USB3.0 compatible
Capacity up to: USB drive: 2TB, USB-HDD: 2TB, HDD / SSD: 15TB
Stand-alone
Power supply : 12V 5A (included)
Ultra high speed up to 18GB / min
Operating temperature: 5 - 45 ℃

USB3.0 til IDE/SATA adapter
Til 2½" og 3½" HDD og SSD
Inkl USB3.0 kabel (USB A han til USB B han, 1,2 m)
LED indikator
ON/OFF knap
Forsyning: 12V, 2A

Monteringsramme/ adapter til 2½" HDD eller SSD 
Nem og praktisk måde at skifte 2½" HDD el SSD i PC'en
Intern tilslutning
Adapteren placeres i ledigt drev
12,7 mm tyk
Plug & Play

Tilpasningsskinne/ monteringsskinne til 4x 2.5" eller 1x 3.5" og 2x 2.5" HDD og SSD

Mounting rail 2.5 to 3.5 HDD / SSD
Material: Metal
Color: black
1 x Hard drive bracket to
8 x screws for mounting
Dimensions: 115mm x 100mm x 23 mm (L x W x H)
weight: 60 g

Konverter til 2x 2½" mSATA SSD 
RAID 1,0
SATA 1,2 & 3 mSATA SSD
Hardware baseret controller
OS support: Windows, Linux and Mac

USB3.0 for SATA adapter cable for SATA 2.5 "HDD
- Plug & Play
- Convert
- Used for 2.5" SATA HDD / SSD
- Supports: Windows Vista, 7 , 8, 8.1, 10, Linux Kernel 2.6.31, Mac Lion 10.7.4

Stand-alone USB stick duplicator with LCD display
USB memory stick duplicator 13 inch - 1 master
File formats: FAT16 / 32, exFAT, NTFS, Linux ext2, 3, 4)
110 ~ 220VAC
28.6 x 19.0 x 17.4 cm
Supports & nbsp; USB1.1 and USB2.0 and USB3.0 TB drive 1+ - CF, SD, miniSD, microSD, MMC, MS,
MS Duo Memory Card (Use: Memory USB Card Adapter)

U.2 SFF-8639 NVME / SATA 22 PIN for 1 x M.2 Convert
1 x U.2 SFF-8639 Han connector
1 x SATA 6 GB / S 22 Pin
1 X 67 Pin M.2
SATA / PCIE slot
NVME M.2 can only be used with U.2 SFF-8639 Port
SATA M.2 can only be used with SATA Port

USB floppydrev med 1 x USB 1.1 A han stik
Til 3,5" disketter
Eksternt
Hot Swap
Plug & Play
Forsynes via USB
OS Support Windows 2000/XP/Vista/7/8
Anvendes på PC eller notebook med 1 x ledig USBport 
Sort

128GB mSATA SSD, SATA III 6Gb / s
MLC flash
Read speed up to 500 MB / s
Writing speed up to 280 MB / s
-40 ℃ ~ 85 ℃ < br> 5V DC
MTBF: 2,000,000 hours
50.95 * 30.00 * 3.90mm

2,5" SSD, IDE harddisk
MLC
Læsehastighed på op til 500 MB/s
Skrivehastighed på op til 280 MB/s
-40℃ ~ 85℃
5V DC

32GB cf card
Available in several sizes
The picture is not the cf card you get!

64GB mSATA SSD, SATA III 6Gb / s
MLC flash
Read speed up to 500 MB / s
Writing speed up to 280 MB / s
-40 ℃ ~ 85 ℃ < br> 5V DC
MTBF: 2,000,000 hours
50.95 * 30.00 * 3.90mm

Form factor 2.5"
SATA with backwards compatibility to SATA Rev. 2.0 (3Gb/s)Capacities2120GB
NAND3D
Power Consumption0.195W Idle / 0.279W Avg / 0.642W (MAX) Read / 1.535W (MAX) WriteStorage
temperature -40°C~85°C Operating temperature0°C~70°C
Dimensions 100.0mm x 69.9mm x 7.0mm (2.5”)
Weight 39g (120GB – 2.5”
Vibration operating 2.17G Peak (7–800Hz)
Vibration non-operating
20G Peak (10–2000Hz)

Industrial SSD 2½"
128GB 2.5" SSD
SATA III 6Gb / s
112-Layer 3D TLC flash (BiCS5) NAND flash for higher capacities, efficiency, and durability
3K P/E cycle rating for excellent durability and reliability
Max. Read speed up to 560 MB / s
Max. Write speed up to 500 MB / s
Wide temperature support: -40°C to 85°C, Thermal Throttling automatically adjusts temperatures for prolonged product lifespan
5Vdc, Low power consumption: 2.2W
Vibration 20G (20-2000Hz)
Technology: LDPC ECC, RAID Engine, Wear Leveling, SLC Cache, DRAM Buffer, TRIM and NCQ command, Thermal Throttling, SMART Monitor, End-to-End Data Path Protection, ESD Support (IEC/EN 61000-4-2 level 4 )
Dimensions 100.00 * 50 x 7mm
Suitable for industrial PCs, embedded devices, automation, networking, surveillance, and transportation

Eksternharddisk med lagringsholder til m.2 SSD
USB 3.0
Sort
Aluminium
M.2 Card
Solid State drev
1 x USB 3.0 - 9pin UBS Type A
maks antal enheder: 1
Plug & Play
OS Support: Apple MacOS X 10.8 eller senere, Microsoft Windows 7 / 8 / 10

1 x IDE 40 Pin connector
1 x SATA 7 pin plug (yellow host)
1 x SATA 7 pin plug (black - unit)
1 x 4 pin power connector she
SATA 1.5 GB / s and ultra ATA 133 specification
IDE supporter PIO and UDMA mode Kirke using hard drives
LED indicator for power
No driver or installation required

Adaptec AIC-3860Q SCSI controller

RAID levels: 0, 1, and 10
Support for SAS and SATA
512 MB DDR3 (1600 MHz)
1 x internal mini SAS HD (SFF-8643)
12 Gbps per port
OS support: Windows7/8/10, Windows Server 2008/2012/2016/2019, Red Hat Linux, SUSE Linux, Fedora, Debian Linux, Ubuntu Linux, Sun Solaris, FreeBSD, VMware ESXi

8 x 12 Gbps SAS/SATA ports
PCI Express 3.0 x8 interface
2 x Mini-SAS connectors (SFF-8643)
Support for SSP, SMP, STP, and SATA protocols
Up to 12 Gbps through per port

mSATA SSD to 2.5 "SATA adapter card
Plug & Play
Does not require power adapter
Supports SSD size 50 x 30mm
OS Support: Windows2000 / XP / 7/8 / 10, Vista Linux Mac 10 OS
Dimensions: 8.2 x 5.0 x 0.02cm

USB-B Mini 2.0 female (USB A to B cable medføger)
Supports: TF, CF, SD, Mini SD, SDHC, MMC, MS, XD
Power supply: 5VDC (via USB)
Cable length: 41 cm (Ex. connector)
Dimensions: 69.5 x 12.5 x 41 mm (W x D x H)

Supports both NVMe and SATA B+M Key (See photo for exact pin layout)
Heat sink for NVMe SSD
USB-C to USB-A and USB-C to USB-C cables included
USB3.1 Gen 2 Type-C on housing
Dimensions: 102x27x11mm
Windows / Mac OS / Linux

128GB SSD Disk on Module - Vertical mounted
MLC Flash
SATA III 6GB/s
Sequential Read up to 560 MB/s
Sequential Write up to 345 MB/s
Supply: 5VDC
Available as 32GB / 64GB - Option
Operating temperature: 0 ~ +70 ° C
Available with extended operating temperature: -40 ~ 85 ° C - Option

44 pin IDE 2½"
mSATA 51 / 71mm
Only supports slim 44 pin IDE cables
Screws for mSATA are included

Available in black or white

1x Source port, 9x Target port
Speed of up to 2 GB per minute (33 MB/s) per port
USB 1.1/2.0/3.0 support
Tested with capacities up to 18 TB
Quick Copy: FAT16/32, exFAT, NTFS, Linux (Ext2/Ext3/Ext4), MAC (HFS, HFSX, HFS+)
Dimensions 17 x 25 x 15 cm

1x Source port, 9x Target port
Speed of up to 2 GB per minute (33 MB/s) per port
USB 1.1/2.0/3.0 support
Tested with capacities up to 18 TB
Quick Copy: FAT16/32, exFAT, NTFS, Linux (Ext2/Ext3/Ext4), MAC (HFS, HFSX, HFS+)
Dimensions 17 x 25 x 15 cm

Note that CFAST is not general. cf card
Name and model can change from delivery to delivery contact sales if you need special version

3½"
500GB
40 Pin IDE

16-port USB 3.0 HUB good for duplicating multiple USB storage devices.

Dimensions: 182x123x25mm

Material: Plastic

Driver: Not required

Supported systems Windows, Mac OS, Linux

Output: 5V 500mA

Power supply: 5V/5A

Certificates: CE/FCC/ROHS

Protection vs Over current, Over voltage, Electrical leakage, Short circuit, Clutter.

3,5" to 2,5" drive adapter

112-layer 3D TLC (BiCS5) NAND flash for higher capacity, efficiency and durability

3K P/E cycle rating for excellent durability and reliability

Low power consumption: 2.2W

Wide temperature support: -40°C to 85°C

LDPC ECC error correction, RAID engine and DRAM buffer

Thermal Throttling automatically adjusts temperatures to extend product life

Suitable for industrial computing, embedded devices, automation, networking, monitoring and transportation