USB to 1 x RS485 / RS442 adapter with DB9 male - galvanic insulation
Get 1 piece. x RS485 or RS422 port via adapter connected to PC's USB port
Galvanic isolation (optical), 2KVolt
Baudrate up to & nbsp; 921.6 Kbit / s
Windows Win 7/8, Vista, Linux & Server 2000 to Server 2016 (WHQL certified)
Linux Kernel 2.4
Mac OS X 10.9, Driver Approved by Apple
726 kr
Excl. VAT
Quantity
Physically in stock
Product number CNV-USB-RS485I
Specifications
Kabel | 0,9 m |
---|---|
Optisk isolation | maks. 2000 V |
Signaler | RS422/RS485 |
Stik | 1 x DB9 |
USB til seriel konvertere er ideelle til brug, hvor serielle porte ikke er til rådighed, eksempelvis på nyere bærbare og stationære pc’er/servere. Dette kan være en væsentlig besparelse i forhold til at skulle konvertere RS485 systemer til USB. Alle modeller leveres med løst eller monteret USB kabel. Konverterne understøtter både OHCI (Open Host Controller Interface) og UHCI (Universal Host Controller Interface) og visse modeller har optisk isolation op til 2000V (se skema). Maksimal hastighed op til 921,6 Kbit/s på RS422/485 porten
Andre produkter i samme kategori:
USB printer connects to RS232 port - DB9 female to USB B, 1.8 meter cable. The converter is only for specific USB printers
RS232 for USB printer adapter cable
connect USB printer to PC com port
automatic baud rate
power supply included
DB9 female and USB B
Supply voltage: 5VDC 100mA
GDI printers (without own emulation) are not supported
See list of supported printers under Downloads
1,900 kr
Item Number: CNV-USBB-RS232
CAN bus to USB adapter. Connects a PC with USB port to CAN Bus. CAN 2.0A and CAN 2.0B up to 1Mbps
CAN bus port on your computer via USB 1.1, 2.0 or 3.0 port
Powered from USB port
LED shows initialization and CAN bus status
Installs as a standard Windows COM port
CAN modes: Standard, Listen, Echo
Controlled using ASCII commands
API provided along with examples
Plug and play installation
CAN bus speed up to 1 Mbps
Supports CAN 2.0A and CAN 2.0B protocols
Drivers provided for Windows and Linux OS
Supports SocketCAN (slcan driver) since kernel 2.6.38+
1,132 kr
Item Number: CNV-USB-CAN
USB to 1 x RS232 adapter - get a COM port on the PC via the USB port. FTDI chip. With threaded bushing for COM cable
RS232 - 08/07 bit
Max. 115.2 kbit / s
FTDI chip - FT232xx.
Does not work with software license dongles
With internal jumper getting + 5VDC on pin 9
1 meter USB cable
Supports Win10 < / p>
455 kr
Item Number: CNV-USB-SER9T
Internal USB to RS232 converter card with 5V on DB9
Two 16550 High performance UART (RS232) serial channels
Occupies one PCI or PCIe bus slot
Low Profile PCI Form Factor
Includes Low Profile PCI & Regular size PCI two brackets
Both USB A type and USB pin header connector on board to host connection
One RS232 DB9M and one RS232 10pin RJ45 serial ports on board
Includes one 10pin RJ45 – DB9M Bridge cable for 2nd DB9M port
5VDC Power output from each DB9M Port for POS device use application
2 Jumpers Individually enable / disable 5VDC output for each DM9M Port
On Board Molex mini 4Pin Power connector for sufficient DB9M 5V bus power from PC power supply
Supports 32bit/64bit Windows 7, Vista, XP, 2000, ME, 98SE
178 kr
Item Number: CNV-USB-RS232INT
Previous
Next