20 x analog or 10 x differential inputs, 0 - 20ma, +/- 10 volts, 16bit solution, sample speed 10Hz, RS485. 10 - 30vdc.
20 channel analog input module for RS485 Bus
16bit resolution
20 Single Ended inputs (common frame) - Only for Volt
10 differential entrances for volts about power
10 measurements per second (Total )
Jumper Setting in the module
Supply voltage: 10 - 30vdc / 1.3 watts
Dim: 123 x 72 x 35 mm
DIN bracket
4,019.20 SEK
Excl. VAT
Quantity
On the way in
Product number M485-AD16U20-I
Specifications
Forsyning | 10 - 30 VDC, 2 W via klemrække |
---|---|
Indgang | 10 differentielle eller 20 ”single-ended” indgange |
Indgangsimpedans | 2 MΩ ved differentiel og 1 MΩ ved single ended 125 Ω ved strømmåling |
Isolation | 3000 VDC |
Maks. hastighed | 60 målinger pr. sek. ved 12 bit og 10 målinger pr. sek. ved 16 bit (totalt på alle 10/20 indgange) |
Måleområde | ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V samt ±20 mA, 0-20 mA og 4-20 mA |
Opløsning | 12/16 bit. ±0,1 % præcision ved 16 bit og ±0,5 % præcision ved 12 bit |
Stabilitet | Nulpunktsdrift: ±20 µV/°C Drift af følsomhed: ±25 ppm/°C |
Analog input module, which supplies either 10 balanced input channels or 20 input channels with common frame - for voltage measurement. Entrance channels can be selected via a jumper. The input type includes both voltage and power, and all channels are available for the same input range. The modules also have 3000 VDC insulation in the module and protection against +/- 120 VDC overvoltage.
The sampling rate Adjustable, meaning that either fast mode or normal mode can be selected.
Andre produkter i samme kategori:
1 x analog output, 0 to +10 volts, 0-20mA, 4-20MA, 12bit, RS485
Power or Voltage Output
0 - +10VDC, 0 - 20mA, 4 - 20mA
Resolution: 12-bit
Software Selectable Power or Voltage Output
Output Cable Detector for Power Output (4 - 20mA)
Backlink Voltage or Current
Configurable Power-on Value
Configurable Safe Value
3000 VDC Intra Module Isolation
Programmable Output Slope
Dual Watchdog
Temperature Range: -25 to +75°C
3,132.80 SEK
Item Number: M485-DA12-I
4 x analog output, 0 - +/- 10V and 0 - 20mA, 14bit. 5 x digital input with DRY contact to GND. RS485 bus. 10 - 30vdc.
RS485 module with volt / mA output. Digital input
4 x analog output - 0 - +/- 10V and 0-20mA
Resolution: 14bit
5 x Digital input - Active high on contact for frame
RS485 Bus - Module is Slave
Format: (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate: 1200 ~ 115200 bps
Supply: 10 ~ 30 VDC
4,721.60 SEK
Item Number: M485-DA4DI5-1
3 x temperature measurement with PT100, PT1000 sensor and nine RTD elements, 16bit resolution, RS485 bus. 10 - 30vdc.
Module for PT100 or PT1000 sensor with 4-, 3- or 2-wire
for nickel temperature sensor (Ni RTD)
16 bit resolution
15 Measurements per second (Total)
Supply voltage: 10 - 30vdc / 1 Watt
Master RS485 must establish bias voltage
Dim: 123 x 72 x 35 mm
4,524.80 SEK
Item Number: M485-ADRTD3-I
8 x analog differential inputs, 0 - 20mA, +/- 10 volts, 16bit solution, sample speed 10Hz, RS485. 10 - 30vdc.
8 channel analog input module for RS485 Bus
16bit resolution
10 measurements per second (total)
for current measurement - shunt with 125 ohm resistance
Supply voltage: 10 - 30vdc / 1.3 watt
Dim: 123 x 72 x 35 mm
with your bracket
3,203.20 SEK
Item Number: M485-AD16U8-I
Previous
Next