Previous
Next

1 x Analog in, +/- 10V, 0-20mA, 16bit, 1 x digital in, 2 x digital Open Coll. Display, RS485 bus. 10 - 30VDC.

RS485 Module for measuring voltage and power
is with 15VDC transmitter output for power loop
1 x analog input 0-20MA, 0 - +/- 10V
1 x digital input. High is closed Contact
2 x Digital output (Open Collector) + 50VDC / 30mA
Supply voltage: 10 - 30VDC
Dim: 123 x 72 x 35 mm

383.00 €
Ekskl. moms
Quantity
On the way in
LÆG I KURV
Product number M485-AD16UD-I
Get Volume Offer
close

Get Volume Offer

 
file_download DOWNLOADS
Ask a question
close

Stil et spørgsmål

 

Specifications

Forsyning 10 - 30 VDC, 1,8 W via klemrække
Indgang 1 digital indgang med pull-up: 10 KΩ til 5 VDC Logisk 0: 0 – 1 V Logisk 1: 3,5 – 30 V 1 kanaks PT100 eller Ni RTD til 2-, 3- eller 4-tråds følere
Indgangsimpedans 30 KΩ
Isolation 3000 VDC
Maks. hastighed 10 målinger pr. sek.
Måleområde ±150 mV, ±500 mV ±1 V, ±5 V, ±10 V samt ±20 mA (Kræver 125 Ω shuntmodstand)
Opløsning 16 bit, ±0,05 % præcision
Skærm 4½-ciffer display
Stabilitet Nulpunktsdrift:…… Drift af følsomhed:… ±0,3 µV / °C ≈ ±0.01 °C / °C ±25 ppm / °C ≈ ±0.01 °C / °C
Udgange 2 digitale udgange med ”Open collector” 30 V/30 mA

Er et 1-kanals spænding/strøm indgangsmodul, der giver en +15 VDC isoleret sløjfe strømforsyning til senderindgang og er designet til både spændings- og strømindgangstyper. Derudover leverer modulet 1 digital indgangskanal som en 50 Hz hændelsestæller og 2 digitale udgangskanaler, der kan bruges som en høj / lav alarm. I-7014 har også 3000 VDC isolering inden for modulet.

Andre produkter i samme kategori:

I-7013 module with 1 x temperature measurement with PT100 and nine RTD temperature sensor,
1 x temperature measurement with PT100 and nine RTD temperature sensor, 16bit, RS485 bus

RS485 Module for temperature sensors
1 x input for 2-, 3- or 4-wire PT100,Pt1000 sensor
Nickel Temperature sensor
Supply voltage: 10 - 30vdc

290.50 €
Item Number: M485-ADRTD-I
On the way in
ADD TO CART
Quick view
RS485 Module for Load Cells: 2 Inputs, 4 Outputs, Display
2 inputs for Strain Gauge, 1 x excitation output, 1 x digital in, 4 x digital out, RS485 bus, Display.

RS485 Module for load cells
2 analog inputs for 4 wire load cell,
1 excitation Exit
1 Digital input
4 digital outputs
Supply: 10 - 30VDC

160.87 €
Item Number: M485-AD16DA12-ID
Physically in stock
ADD TO CART
Quick view
ICPDAS I-7021 has a 1 x analog output, 0 to +10 volts, 0-20mA, 4-20MA, 12bit, RS485
1 x analog output, 0 to +10 volts, 0-20mA, 4-20MA, 12bit, RS485

Power or Voltage Output
0 - +10VDC, 0 - 20mA, 4 - 20mA
Resolution: 12-bit
Software Selectable Power or Voltage Output
Output Cable Detector for Power Output (4 - 20mA)
Backlink Voltage or Current
Configurable Power-on Value
Configurable Safe Value
3000 VDC Intra Module Isolation
Programmable Output Slope
Dual Watchdog
Temperature Range: -25 to +75°C

262.48 €
Item Number: M485-DA12-I
Physically in stock
ADD TO CART
Quick view
I-7024 module with 4 analog outputs 0-20mA and +/- 10V. RS485 bus
4 x analog outputs, +/- 10 volts, 0-20mA, 12bit, RS485 bus

RS485 module with 4 analog outputs
0-20mA or 0 - +/- 10V
D / A response time: 10ms
Resolution: 14bit
Supply voltage: 10 - 30vdc

395.60 €
Item Number: M485-DA4-I
On the way in
ADD TO CART
Quick view
ICP DAS I-7024R-G is a 4 x analog output module, 0 - +/- 10V and 0 - 20mA, 14bit. 5 x digital input with DRY - Contact
4 x analog output, 0 - +/- 10V and 0 - 20mA, 14bit. 5 x digital input with DRY contact to GND. RS485 bus. 10 - 30vdc.

RS485 module with volt / mA output. Digital input
4 x analog output - 0 - +/- 10V and 0-20mA
Resolution: 14bit
5 x Digital input - Active high on contact for frame
RS485 Bus - Module is Slave
Format: (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate: 1200 ~ 115200 bps
Supply: 10 ~ 30 VDC

395.60 €
Item Number: M485-DA4DI5-1
Physically in stock
ADD TO CART
Quick view
8-channel analogue inputs and 4 channel Relay Output Module M-7003-G
8-channel analogue inputs and 4 channel Relay Output Module M-7003-G

RS-485 Interface
DCON Modbus/RTU Protocol
8 x Analog Inputs
4 x Relay Outputs
DIN rail / wall mount
Temperature: -25 to +75°C

449.89 €
Item Number: MOD485-AI8PR4-I
On the way in
ADD TO CART
Quick view
ICP DAS I-7033 - 3 x Temperature measurement with PT100, PT1000 sensor and nine RTD elements, 16bit resolution, RS485
3 x temperature measurement with PT100, PT1000 sensor and nine RTD elements, 16bit resolution, RS485 bus. 10 - 30vdc.

Module for PT100 or PT1000 sensor with 4-, 3- or 2-wire
for nickel temperature sensor (Ni RTD)
16 bit resolution
15 Measurements per second (Total)
Supply voltage: 10 - 30vdc / 1 Watt
Master RS485 must establish bias voltage
Dim: 123 x 72 x 35 mm

379.11 €
Item Number: M485-ADRTD3-I
On the way in
ADD TO CART
Quick view
8 x analoge indgange, maks. +/-10 volt, 16bit, RS 485forVia RS485 bus
8 x analog differential inputs, 0 - 20mA, +/- 10 volts, 16bit solution, sample speed 10Hz, RS485. 10 - 30vdc.

8 channel analog input module for RS485 Bus
16bit resolution
10 measurements per second (total)
for current measurement - shunt with 125 ohm resistance
Supply voltage: 10 - 30vdc / 1.3 watt
Dim: 123 x 72 x 35 mm
with your bracket

268.38 €
Item Number: M485-AD16U8-I
On the way in
ADD TO CART
Quick view
Previous
Next

We use third-party cookies to enhance your browsing experience, analyze site traffic and personalize content, ads. Learn more.

Allow cookies Not accept