CALL US NOW: +45 56 66 20 20
GSM controllers in this group are well suited for remote monitoring and control of facilities for mobile network equipment, vehicle monitoring, environmental monitoring and food control, etc.
GSM remote monitoring works over the mobile network . They use 2G and 3G (phase out), GPRS and 4G (LTE) and 5G. GSM controllers are not only used in places without Ethernet connection, but where the connection via the mobile network is mandatory. Several GSM controllers have a built-in WEB server for easy setup, and do not need a special software. Some GSM controllers have MTM protocols such as HTTP record with XML / JSON status files, and HTTP API commands and both data collector and remote control, although they do not have public static IP address.
Some GSM controllers are set up using SMS commands. Some support email client with TLS encryption to send email alert under alarm conditions. Along with emails, the warning can also be sent as standard SMS. GSM controllers have standard analog inputs for DC voltage measurements, as well as digital inputs for contact monitoring and several have 1-Wire interface that supports up to 8 sensors.
Relays can be activated either remotely via SMS or HTTP API or locally.
HTTP content can be sent periodically or at previously set alarm conditions. This is very useful in client-server systems for GSM GPRS remote monitoring and control as part of SCADA computer systems.
Mini vertical level switch / swim switch
Assembly: Vertical
contact output: Direct load
Cable length: 30 cm
Operating temperature: -20 ° C to + 80 ° C
AC voltage Max: 130V < Br> DC voltage Max: 180V
Max current: 700mA
GSM/3G/4G LTE
2 x digital input, compatible dry contact and wet contact, supports EOL connection;
2 x relay outputs (240VAC@3A)
One relay output can be switched on/off by sending an SMS text
The second relay output can be switched on for 4 minutes if inputs are activated
Supports input status recovery, external power failure alarm via SMS texts
Must be programmed with USB cable to PC
9~36VDC supply voltage and power source output for external device
Up to 3 users can receive alarm and daily report SMS
Up to 5 users can receive alarm calls;
Free SMS APP
Rechargeable backup battery and power monitoring alarm
Metal housing, IP30
Operating temperature: -10 - +70°C
Dimensions: 70 x 88 x 30 mm
Wall installation and DIN
Whip antenna with magnetic base 3m cable included
Control via SMS messages
Alarm at power failure
Relay output for 230VAC
Universal input for temperature sensor
GSM I/O box. Compact access control with up to 999 users
Specified time range for access
3G/4G 850/900/1800/1900 MHz
2 digital contact inputs
1 Relay output 230Vac max. 3A
Supply voltage: 9-15VDC
Dimensions: 88 x 70 x 30 mm
Operating temperature: -20 - +60°C
Antenna included
APP for Android
GSM alarm controller - sends alarm SMS and calls
8 x digital inputs
Must be programmed with USB cable to PC
Microphone in, line out (listening in and conversation)
Battery back-up
Antenna with SMA male included
4G mobile network
Temperature range -40 to 120 ° C
Moisture range 0 to 99% Target 70 x 5 mm
Fits GSM-IO-PWR
Temperature sensor with 5 meter cable
measuring range -55 ° C To + 125 ° C
Fits GSM-IO-PWR
Measure 45 x 5 mm
Vandal-proof GSM dome antenna for metal roof mounting
850-960 / 1770 - 2100 MHz
with 1.5 meter RG 174 Cable
SMA male (rounder + tap)
ABS plastic - With rubber gaskets
Thread hole Ø12 mm
Vandal secure GSM dome dome antenna for hollow mounting
Quad band - 850/900/1800/1900 / 2170MHz
With 2.5 meters RG 174U cable - SMA he
ABS plastic - with rubber seal Ø47 x 15mm, M10 thread, 12mm
bandwidth ± 90/280 MHz
Gain 2,5dBi
vertical
Max wind speed 200km/h
Thermal sensor for mounting incl. 10 m wire
