RS232 to RS422 / 485 converter. Can be powered from COM port control signals
With CNV232-485PW + you get an RS485 or RS422 port on the PC
Selecting RS422 or RS485 with DIL switches on the device
Super compact with DB9 female and screw terminals
Can be powered by external voltage from 9 - 12VDC / 500mA
Operating temperature: -40 - + 85 ° C
906.00 kr
Excl. VAT
Quantity
Physically in stock
Product number CNV232-485PW+
Specifications
Forsyning | Forsynes af RS232 porten |
---|
Type: RS232 'RS422 / RS485 converter
Speed: Up to 921.6 kbit / s
Distance: Up to 1.2 km on RS422 / 485 s in it and up to 15 m in RS232 since
Supply: Supplied by RS232 port or 9 - 12VDC
Connectors: RS232: DB9F, RS485: Screw Terminal
switch to select RS422 or RS485 well as local echo on or off by RS485
signals: RS232 : TXD, RXD, RTS, DTR, GND
signals: RS422: TXD +, TxD-, RXD +, RXD-
signals: RS485: TRXD +, TRXD-
Other products in same category:
Isolated RS232 to RS422 converter works both ways
transfer mode RS422 - full duplex
max.transfer rate 115 kb/s
max. line length 1 200 m
transfered signals RxD, TxD
selectable terminator 120R
connector RS232 D - SUB 9 pin F
connector RS422 D - SUB 9 pin M
galvanic indication (LED) red PWR, yellow RxD, green TxD
power supply 12V + -10%
input supply max. 1W
dimension 63 x 17 x 34 mm
1,142.00 kr
Item Number: CNV232I422DB9
Optoisolated RS232 for RS485 / 422 converter. Double insulated DC / DC power supply.
RS485 for RS232 or RS422 for RS232
optoisulated RS232 for RS422 / 485 Converter
supply voltage is isolated against RS232 page
Supply voltage is isolated against RS485 / 422 page
Automatic Baud rate control
933.00 kr
Item Number: M485-CNV232R-I
Optoisolated RS232 to RS422 / RS485 converter. SELF-TUNING BAUD RATE ADJUSTING. RS232 is isolated from PSU
Optoisolated RS232 for RS422 / 485 Converter
3000vdc isolation
Up to 1.2 km on the RS422 / RS485
1.2kbit/s to 115.2 kbit/s, automatic baud rate
DB9 female connector for RS232 Signal
Screw terminals for RS422 / 485 signals
Supply 10 to 30 VDC
913.00 kr
Item Number: M485-CNV232-I
RS232 for RS485 or RS422 Converter, Galvanically Isolated, Baud Rate from 50 - 921.6 Kbit/S, MOXA TCC -100I
Industrial RS232 to 422/RS485 Serial Converter/ Repeater with 2 KV Isolation, MOXA TCC-100i
RS-232 to RS-422 conversion with RTS/CTS support
RS-232 to 2-wire or 4-wire RS-485 conversion
2 KV isolation protection (TCC-100I/TCC-100I-T)
Wall and DIN-rail mounting
Plug-in terminal block for easy RS-422/485 wiring
LED indicators for power, Tx, Rx
-20 to 60°C operating temperature
1,502.00 kr
Item Number: CNV232I485M-OPT
Addressable RS485 Convert to 3 x RS232, 1 x RS485 / 422 port. Up to 115.2 Baud, -25 - +75°C
RS485 & nbsp; recoverable RS232 controller / converter
Link to 3 x RS232 units from 1 x RS485 bus
Baud speed 300 bit/s to 115,200 bit/s
10 V DC to + 30 V DC
Dual watchdog
256 KB SRAM buffer
1 x & nbsp; RS485 address per. serial interface
Operating temperature: -25 ° to + 75 ° C
For DIN rail mounting
2,719.00 kr
Item Number: M485-CNV4RS232
RS232 for RS485 converter, 1200m, 115.2kBit / s, 3kV isolation on RS232 side, 10 - 30VDC, -25° - +75°C
Optoisolated RS-232 for RS485 converter
3kVDC isolation on RS232 from DC input
ESD protection for RS232 / 485
Baud rate 300 bit / s to 115,200 bit / s
Supports power inputs of +10 V DC to +30 V DC
Operating temperature: -25 ° to + 75 ° C
For DIN rail mounting
893.00 kr
Item Number: M485-CNV232+I
Previous
Next