CALL US NOW: +45 56 66 20 20
Here you will find a large selection of b.la. Power Supplies, PSU and UPS. At Danbit offer power supplies for virtually all needs, everything from a standard PC power supply to a 12 volt power supply or ATX. Our staff has extensive knowledge and expertise in various installations including power supplies.
As a special offer Danbit laboratoie power. Power supplies that are ideal for test use and laboratory setups. See this category below. Should you be left with unresolved questions please contact us today.
Input voltage: 10 - 30VDC
Output voltage: 48VDC
Max current: 8 Amp
Overvoltage, over-current protection
Waterproof, dustproof
Voltage regulation: <1%
Ripple: 180mVp-p
Switch frequency: 50kHz
Efficiency: 95%
Dimensions: 100 x 80 x 39 mm
Flange mounting
Weight: 550g
Temperature range: -40 to + 80°C
Cable length: 16cm
18500 Lithium-Ion battery
Rated voltage: 3.7V
Capacity: 2040mAh
Max. load: 3.8A
Operating temperature: +10 ~ + 45 ° C
Charging method: CC-CV
Dimensions: 18.5 x 49.5 mm
Weight: 36.5g
Without protection circuit
2 Meter
PD Charger cable
Data transfer up to 480Mbps
240Watt
48V/5A PD240W(Max) / 480Mbps /PD140W / PD100W / PD60W
PD3.1/E Chip
2 Meter
4 in 1 cable
USB to USB-C
USB-C to UCB-C
USB-C to IOS (lightning)
USB-A to IOS (lightning)
PD Charging (Power Delivery)
2 Meter
USB-C to USB-C
With PD (Power Delivery)
Up To 480GBs
2 Meter
USB-C to USB-C
With PD (Power Delivery)
Up To 480GBs
1.5Meter
USB-C to USB-C
With PD (Power Delivery)
Up To 480GBs
MAX. total 65 Watt
GaN technology
110-240Vac
2 x USB-C
2 x USB-A AC (QuickCharge)
max current capacity
3 A max. performance 65 W
Output:
USB-C™ PD1 (single) max. 65.0W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 3.0 A (27.0 W) DC
12.0 V max. 3.0 A (36.0 W) DC
15.0 V max. 3.0 A (45.0 W) DC
20.0 V max. 3.25A (65.0 W) DC
USB-C™ PD2 (single) max. 18.0 W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 2.0 A (18.0 W) DC
12.0 V max. 1.5 A (18.0 W) DC
USB-A QC1 max. 18.0 W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 2.0 A (18.0 W) DC
12.0 V max. 1.5 A (18.0 W) DC
USB-A QC2 max. 18.0 W
5.0 V max. 3.0 A (15.0 W) DC
9.0 V max. 2.0 A (18.0 W) DC
12.0 V max. 1.5 A (18.0 W) DC
Dimension 87.2 (L)x 91 (W)x 19.5 (H)mm
Weight 154 g
20 cm
4 pole male DC plug
Jack connector 5.5x2.1mm female
5.5x2.5mm compatible
CHECK PINOUT BEFORE CONNECTION!
600 watts
Dimensions: 140 x 150 x 68 (L x W x H)
Efficiency: 80 Plus Bronze
SATA, MOLEX, 20 PIN, 4 PIN, 8 PIN, 6 PIN
-5* is optional -5VDC 0.5A (must be ordered)
SFX PSU to ATX(PS2) mounting holes
Designed for use in most ATX or Micro-ATX cases
150mm (L) x10mm (H) x 86mm (W)
5.91" (L) x 0.39" (H) x 3.39" (W)
0.8mm
800W PSU
1 unit, 1U single power
90 ~ 264 VAC Full-Range
Output: + 5V and + 3.3V
47 ~ 63 Hz
0 ℃ -50 ℃ < br> Core filter EMI FCC Class B, CISPR22 CLASS B
Dimensions: 41 x W H 100 x D 275
SATA
P4 plug connector Xeon
PCI-Express
Supply Voltage 100-240 VAC
H x W x D: 150 x 86 x 170 mm
Input 90~264Vac Auto
Internal 8 cm fan with IEC 62368 standard vents opening
Low Ripple Noise
Support OCP, OTP and OVP circuit protection
Short circuit protection on all outputs
Resettable power shut down
MTBF:100K hours at 25°C
100% under high ambient temperature (50°C)80 plus bronze
350watt
ATX
PS2 format
industrial
H 86 x B 150 x D 140
ATX Power Supply P4 - 80PLUS Gold
Power 650 W
Pin 20 + 4
4 x SATA
4 x MOLEX for PCI Express 2 x 6 + 2 pins
100- 240 VAC
Industrial 850 Watt ATX power supply
Efficiency: 80+ Gold
Fully modular cables
1 x 24-pin Motherboard
2 x 4 + 4-pin CPU
6 x 6 + 2 -pin PCI
14 x SATA
5 x MOLEX
1 x Floppy
MTBF: 100,000 hours
Dimensions: 510 W ATX with P4, PCI-Express and SATA
Dimensions: H 70 x W 100 x D 240
