I / O module with 12 DI and 8 DO Web-based. Moxa ioLogik E2210

MOXA ioLogik E2210
Ethernet Micro RTU Controller
1 x 10/100 Mbps, RJ45
1.5 KV magnetic isolation
Modbus / TCP, TCP / IP, UDP, DHCP, Bootp, SNMP ( MIB for I / O and Network), HTTP, CGI, SNTP
RS-485-2w Data +, Data-, GND
15 KV ESD
12 x digital input - source type
Digital output: 0 to GND
Logic 1 open
Wet Contact: Logic 0 0:02 3 VDC
Logic 1 10:02 30 VDC (DI COM two DI)
8 x Open Collector sink type: 36 VDC / 200 mA 
Power supply: 12-36 VDC

ETHIO12I8O-M
3,260.00 DKK
Tax excluded
Quantity
On the way in  

  • Download PDF
  • file_download Downloads
  • live_help Ask a question

Automatic control of the output channels, depending on the input conditions
Digital and analog input and temperature sensors monitoring
Controls the digital and analogue outputs and relay contacts
simple configuration, does not require any programming knowledge
refine by max. 16 rules with up to 3 input and output status
definition of status messages (TCP / UDP, SNMP trap or e-mail)
peer-to-peer mode for simple transmission of I / O signals via Ethernet
Supports active OPC for communication with SCADA systems
Ethernet connection (RJ45 10/100 Mbps) and RS485 interface
Power supply: 12-36 VDC

Driftstemperatur
-40 - 75°

4 other products in the same category:

L-CON modul med digitale...

L-CON modul med digitale udgange

Intelligent Controller with Webserver
Logical functions such as: IF-THEN-ELSE
No programming. Just pick, click and finished
Supports: I/O module, counter, timer, email
Modbus/TCP protocol to SCADA software seamless integration
IEEE 802.3af compliant Power over Ethernet ( PoE)
1 x RJ45 - 10 / 100Mbit Ethernet
8 x Power relay output, COM NO
Relay switch: 30VDC, 250VAC 5A, only resistive load
Supply voltage: PoE or 12 - 48VDC / 5.5Watt

Price 2,555.00 DKK
Product code: L-CON8R
Physically in stock  
Quick view
L-CON modul med digitale...

L-CON modul med digitale ind- og udgange

1 x RJ45 - 10/100 Base-TX Ethernet
Can be powered from a PoE
Integrated Web Server Setup
Logical functions with IF-THEN-ELSE
Rules, I / O, CGI counter, Timer, etc.
Email setup via Web browser
Modbus / TCP Protocol to 6 x Digital input (Wet Contact - external voltage for High)
Digital input has 16 bits counter
6 x Relay Power Output: 5A at 30VDC / 250VAC
Power over Ethernet (PoE) or an external DC power supply
Supply voltage: PoE or 12 - 48VDC / 5Watt
temperature range -25 ° C ~ + 75 DEG C

Price 2,323.00 DKK
Product code: L-CON6I6R
Physically in stock  
Quick view
L-con controller with 10 x...

L-con controller with 10 x analog input and 6 x digital output. Also for thermocoupler sensors, PoE

Intelligent Controller with Web Server
Logical functions, such as: IF-THEN-ELSE
No programming. Just select, click and finish
Supporter: I/O module, counter, hour, e-mail
Modbus / TCP protocol for SCADA software Seamless integration
IEEE 802.3af compatible power over Ethernet ( Poe)
1 x RJ45 - 100Mbit Ethernet
7 x Analog input: 0 - +/-2.5V, 0 - 20mA (ext. Resistors)
A/I Resolution: 16bit
10 Samples per Second
A/I Also to Thermocouller: J, K, T, E, R, S, B, B, C, L, M, LDIN43710
6 x Digital Output: 0 - + 50VDC / 700mA Open Collector
Supply voltage: POE or 12 - 48VDC / 4.5Watt

Price 3,317.00 DKK
Product code: L-CON10TC6O
On the way in  
Quick view
MQTT 16 x Digital input...

MQTT 16 x Digital input module. TCP and MQTT protocol, 2 x LAN ports Daisy chain. Dry contact input. 12 - 48VDC

Built-in web server
Web HMI
Supports Modbus TCP and MQTT protocols
2-port Ethernet switch (LAN Bypass) for Daisy-Chain Wiring
Double watchdog
Digital input: 16 channels
Dry contact input
Input to Gnd = High (ON)
Input open = Low (OFF)
Supply voltage: 12 - 48VDC
Temperature: -25 - +75°C
Dimensions: 120 x 97 x 42

Price 2,443.00 DKK
Product code: MQ-I16D-2L
On the way in  
Quick view