CALL US NOW: +45 56 66 20 20
We have a very large selection of load cells for tension and compression, torque measurement for steady and rotating items.
There are load cells in many designs and weight classes. Contact our sales personnel for guidance and prices. Do you have special requirements we will be happy to look into this. We can also offer load cells for projects.
Note: It is a very small selection you will find on our website ..
3-axis - ForceX, ForceY, ForceZ Load cell
3 x Strain Gauge Bridges
Series from 10n to 500 KN Power Area
Current model is for 120kN
Compact Size
Low Cross Talk
mV/V output
Temperature compensated
Made in Aluminum - De-stressed material
Load Cell series for the hard environment
the series is from 12.5n to 445Kn
current model is to 111Kn
Temperature compensated Strain Gauge
%FS: 0.03% High Output: 4mV/V For high accuracy
very low Deflection
made of stainless steel
Hermetical environmental sealed
16-bit strain gauge / weighing bridge amplifier - datalogger
With temperature compensation
Excitation sense 2.5VDC
Bridge input: +/- 8mV Version: 16mV and 32mV
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc.: Software to configure, download, plotting, analysis and an alarm (not supplied)
Configurable alarm controls
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
S-type load cell
impedance input: 410 ohm
Iimpedance output: 350 ohms
Exitation: 10 - 15V
4-wire
Thread in top and bottom: M8 x 1 , 25 mM
Full load = 100kg
Overload: max. 150%
Low profile single-point load cell, 1.25 to 5 kN, compact aluminum design. Ideal for platform scales, force measurement, and precision weighing applications.
Overload protection: ± 400% of rated load
Temperature:
Temperature range: -10ºC to +45ºC
Temperature during use: -55ºC to +90ºC
Output Signal: 3.00 mV / V (nominal)
Supply voltage: 15 VDC
Cable length: 1.5 m
Dimensions: 130.3 x 50.8 x 31 mm
Weight: approx. 725 g
Linearity: ± 0.02% of rated load
Hysteresis: ± 0.02% of rated load
Reproducibility: ± 0.01% output
Transtronic FAE150
Load cell for tension and pressure. Withstands 50% overload without permanent damage
SMT Overload Protected S-Type Load Cel
Vejeforstærker til forsyning med 110/220/240 VAC eller med 24 VDC
