Power supplies USB / ATX / AT / Mains adapters / UPSs

Industrial 850 Watt ATX power supply
Efficiency: 80+ Gold
Fully modular cables
1 x 24-pin Motherboard
2 x 4 + 4-pin CPU
6 x 6 + 2 -pin PCI
14 x SATA
5 x MOLEX
1 x Floppy
MTBF: 100,000 hours

48V DC ATX with 12V connector for P4, 2U
These power supplies can be used where the ordinary mains voltage (230 VAC) is not available - eg. in cars or on ships.
There can be supplied three types with +12 V, +24 V or -48 VDC input.
is equipped with EMI filter.

Dimensions: 510 W ATX with P4, PCI-Express and SATA

Dimensions: H 70 x W 100 x D 240

48V DC ATX

400 W ATX til 24 VDC

300 W ATX til 2U 19" rackkabinetter

Input voltage: 90-264Vac
Input frequency: 47-63Hz
Input current: 115Vac @ 6A, 230Vac @ 3A
80 Plus Bronze
Internal 4 cm fan with IEC 62368 standard vents opening
Short circuit protection on all outputs
Working temperature: 0°C to 50°C
Storage temperature: -20°C to + 80°C
Efficiency: 80 Plus Bronze Working humidity: 85% RH non-condensing
Storage humidity: 95% RH non-condensing
CE, FC, Tüv, E190414
Dimension (L x W x H): 190 x 100 x 40.5 (mm)

300W SFX, with auto detection of AC

Dimensions: H 64 x W 125 x D 100

300 W ATX PSU with P4
Auto 110V/230V
20 pins
Ball bearing DC fan
Low noise
Dimensions: H 86 x W 150 x D 140

180 W ITX with P4 connector

Dimensions: W 82 x L 150 x H 40mm

12V DC ATX

1200 W ATX med P4, PCI-Express og SATA
VOLTAGE：90～264VAC
FREQUENCY： 47～63HZ
INPUT CURRENT：15 (RMS) FOR 120 VAC / 8A (RMS) FOR 230 VAC
INRUSH CURRENT：40A MAX. FOR 120 VAC / 80A MAX. FOR 230 VAC
PFC CAN REACH THE TARGET OF 95% @230VAC, FULL LOAD
HOLD UP TIME：WHEN POWER SHUTDOWN DC OUTPUT 5V MUST BE MAINTAIN 12mS IN REGULATION LIMIT AT NORMAL INPUT VOLTAGEEFFICIENCY：TYPICAL 80-85% AT 25℃ 115V FULL LOAD
POWER GOOD SIGNAL：ON DELAY 100mS TO 500mS，OFF DELAY 1mS
OVER POWER PROTECTION：TRIP POINT TOTAL POWER MIN. 110%, MAX. 150%
OVER VOLTAGE PROTECTION：+5V→5.8V～6.7V, 3.3V→3.6V～4.3V, +12V→13.2V～15V
OVER CURRENT PROTECTOIN: +3.3V→37.4~51A, +5V→37.4~51A, +12V→110~150A
SHORT CIRCUIT ：+5V、-5V、+12V、-12V、+3.3V
RESTART AFTER PROTECTION
TEMPERATURE RANGE：OPERATING 0℃～40℃
LEAKAGE CURRENT: 1.5MA MAX. AT NOMINAL VOLTAGE VAC
EMI NOISE FILTER : FCC CLASS B , CISPR22 CLASS B
SAFETY : TO MEET UL, CUL, TUV, CCC
REMOTE ON/OFF CONTROL
160x150x86(mm)

TüV certificerede MC4 stik, sæt m. han- og hun-stik

230VAC to 9VDC / 0.3A
Linear - not regulated
DC plug 3.5 / 1.3mm

230 VAC, 9VDC, 0,2 A, ikke reguleret, type A, 1,3/3,5 mm

AC / DC power supply for DIN rail mounting
5VDC, 25W
Max. 5A
Screw Terminal
Adjustable Output Voltage 4.5 V to 6.2 V
Working Temperature: -20 ° C - + 50 ° C

Switch mode type
100 - 240VAC to & nbsp; 5 VDC, 2 A
DC plug: 5.5 / 2.1mm

Switch mode type
100-240 VAC to 5VDC / 4 A
DC plug. 5.5 / 2.5mm

Switch mode type
5VDC 2A mains adapter
DC plug. 3.5/1.35mm

AC / DC power supply for DIN rail mounting for 48VDC, 96W
Max. 2.5A
Screw Terminal
Adjustable Output Voltage 43.2 to 52.8 V
Working Temperature: -20 ° C - + 50 ° C

180 - 550 VAC input for 24-28VDC fine adjustment
120 W voltage supply
DIN rail mounting
Adjustable output 24 to 28VDC
Working temperature -30 - + 70 ° C

Robust power supply, adjustable from 12-15VDC / 10AMB
for DIN mount
input 180-550VAC
output: 12VDC10 A (120W)
Contact output by power error
Screw terminal
Dim: 130 x 125 x 40mm (H x D x B)
operating temperature: -25 ° C - + 70 ° C

Power supply 100 - 240VAC to 12 VDC / 5A, switch mode. 2.5mm / 5.5mm Jack
Power cord included.

Switch mode type
110-240 VAC for & nbsp; 12VDC / 3A
DC connector: 5.5 / 2.1 mm

Net adapter 12V, 1A - Switch mode
Output: 12VDC / 1Amp
230VAC input
Power plug: 5.5 / 2.5 mm
Cable color: + Red, - White