Loadcell 10 kg
Standard Cell m / M8 x 1.25 thread; Full load = 10 Kg
Subcategories
Standard Cell m / M8 x 1.25 thread; Full load = 10 Kg
Standard cell m / M8 x 1.25 gevind; Full load = 20 Kg
The standard load cell m / M8 x 1.25 thread
S-beam type
Full Load = 5 kg
Maximum load: 7.5kg
Standard Cell m / M8 x 1,25 Anslutningsgänga; Full belastning = 50 kg
Tryck cellrad m / M20 x 1,5 gänga; Full belastning = 1000 kg
Single point celle m/M8 x 2,5 gevind; Fuld belastning=250 Kg
Præcisions-vejeforstærker med RS232-udgang
Vejeforstærker med RS232-udgang, standardversion
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=100 Kg
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=1000 Kg
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=300 Kg
Standardcelle m/M12 x 1,75 gevind; Fuld belastning=500 Kg
Vejeforstærker til forsyning med 110/220/240 VAC eller med 24 VDC
SMT Overload Protected S-Type Load Cel
S-type load cell
impedance input: 410 ohm
Iimpedance output: 350 ohms
Exitation: 10 - 15V
4-wire
Thread in top and bottom: M8 x 1 , 25 mM
Full load = 100kg
Overload: max. 150%
16-bit strain gauge / weighing bridge amplifier - datalogger
With temperature compensation
Excitation sense 2.5VDC
Bridge input: +/- 8mV Version: 16mV and 32mV
4 Megabyte memory to log data
USB and RS232, automatic baud rate up to 115.2kbit
Programmable input ranges (0-2 VDC, 0-20 VDC)
Battery operation - 10 year battery
Acc.: Software to configure, download, plotting, analysis and an alarm (not supplied)
Configurable alarm controls
Measurement speed of from 20 milliseconds (channel 1) to 12 hours
Robust aluminum housing
coated printed circuit board for protection against moisture, corrosion
Load Cell series for the hard environment
the series is from 12.5n to 445Kn
current model is to 111Kn
Temperature compensated Strain Gauge
%FS: 0.03% High Output: 4mV/V For high accuracy
very low Deflection
made of stainless steel
Hermetical environmental sealed
3-axis - ForceX, ForceY, ForceZ Load cell
3 x Strain Gauge Bridges
Series from 10n to 500 KN Power Area
Current model is for 120kN
Compact Size
Low Cross Talk
mV/V output
Temperature compensated
Made in Aluminum - De-stressed material
3-axis Load cell with 3 outlets
simultaneous measurement of pressure and torque perpendicular to the pressure axis
Pressure axis works according to the same specifications Standard model
pressure stiffness and torque stiffness are both very high due to the Low Profile construction.
Load cell with shaft for measuring torque
capacities from 0.1Nm to 1kNm
speed up to 15,000 rpm
± 5vdc output (± 10vdc optional)
12 - 28vdc supply
Contactless data transfer to Stator
Digital electronics with on-shaft shunt
0.2% Combined error
10 kHz Sample Rate
12-bit resolution
measurement of speed and angle
Top-class weighing instrument from Interface
LCD screen, W x H - 117 x 86 mm
Display up to four channel channels per screenshot
With required Legal for Trade information
32 scale accumulations
Millivolt calibration, 5-point linearization and geographic calibration
NEMA Type 4X / IP66 stainless steel enclosure
Selectable A/D with measurement speed up to 960/second
100 set points, 30 configurable
64K uses built-in Non-V RAM
Power for 16, 350 ohm load cells per A / D card
Peak team
Explosion-proof Load Cell
EX certified - hermetically sealed
load cells for tension and compression, 2 ton
Suitable for the oil industry and the like.
Loop-powered with 4-20mA outputs signal
Precision: 0.05%
Handheld 7-digit LCD screen
4 Wire Full Bridge input
with Peak, Trough, Net, Overload and Shunt Cal Indication
Battery operation of 450 hours in power saving mode
Keys for ON / OFF , Interval Selection, Peak / Valley Hold and Gross / Net
Single Calibration (Direct mV/V) with double range for values such as kg and lb
Weighing only 250 grams
IP65 / NEMA4
TEDs Enabled to automatic Sensor calibration (IEEE1451 - Template 33)
Buy Leather case
Battery: 2 x AA
Sovereign Linearity Specifications
Excitation Voltage: 3.3Volt
Resolution: 24bit
% FS: 0.0002
Measurement speed up to 2400 samples per. Second
High internal resolution (up to 500,000 Counts)
IP67 Searched cabinet
Battery powered (long battery life)
128 x 64 Graphic screen with backlight
More display modes (Peak / bottom, Delta, Live , gross and net)
logging and graphing for PC (software is included)
support Ted's template 33, 40 and 41
Live calibration and multi-point calibration
Dim: 170 x 94 x 42 mm
Weight: 330 grams
Environmental sealing drawing and compression road cells
proprietary interface Temperature compensated load meters
Drag and print
small size
Construction of stainless steel
variant for immersed in liquid
mV/V 2.0
For Strain Gauge with 350 Ohm
Select the model with Newton Specification that fits the task
Price depends on weight class and sealing
low profile S-Beam load cells
only for pressure measurement (Tension)
Available in 17 variants from 22 N to 9 kN
Performance of 0.05%
Very large sensitivity
Temperature compensated Strain Gauges
Load Cell for measuring torque on axle
can sit between power source and load
suitable for measuring electric cars etc.
capacity from 100Nm to 10kNm
simultaneous voltage and frequency on the output
Option with digital output via USB
Order required max. power and output format
Top-class load cell - proven construction
Available in weight classes from 1.1 - 223Kn (100kg - 22 ton)
proprietary interface Temperature compensated strain Gauges
Performance for 0.03%
eccentric load compensated
Low deflection
0.0008% / ° F (0.0015% / ° C) temp. Effect on output
Barometric Compensation
Shunt calibration
E74 NIST trackable voltage and compression calibration (optional)
Load cell for tension - button cell model
capacities from 0.01 KN to 100 kN (2.25 LBF to 22.5K LBF)
Overload protected
Temperature compensated
small diameter
Environmental sealed IP60 or IP65
Stainless Steel
Mini button cell for pressure measurement - sealed.
Available in 8 weight classes
superior to any other button cell
integrated temperature compensation
Improved eccentric load rejection
multi-point calibration
integrated loading button
Small diameter
environmental supplies
heat-treated stainless steel
Torque-power measurement of e.g. fastner tools
can measure from 1Nm to 5 kNm - up to 500kg
No moving parts
Ideal for calibration of torque vrenches
Fits standard tool
Reaction twist-load cells in miniformat
Available in 3 weight classes from 5 Nm to 50 Nm (44.3 lbf-in to 443 lbf-in)
proprietary interface
Temperature compensated Strain Gauges
Compact Size: 70 x 60 mm
Excellent linearity and repeatability
low deflection and high twisting stiffness
Order desired weight class
Weigh-pin to shackle or the like. For crane etc.
Designed pins or bolts for a load
stainless steel
used with fork arms or shafts to monitor loads
capacity up to 3.000k lbf. (1,360 MT)
custom Designs
Get Offer on This Product
Mechanical dimensions and Weight Need
Shackel med vejecelle til kran og lign.
Fås i 10 vægtklasser
Denne model fås fra 1 - 35 ton
Crosby shackle
Til træk
Designet til 150% overload
IP67
Bestil ønsket vægtklasse
Crosby shackel with built-in road cell - wireless transfer
4 weight classes - up to 35 mega ton
Economic-proof for IP67
certified shackle and load-pin
2.4GHz WiFi
Battery operated
Up to 12 shackles per measuring instrument
Order for desired weight class
Contact the sales department
Instrument shown is not included
Weighing cell as a shakel pin can weigh up to 1,360 tonnes
Low power consumption for long battery life
Up to 600 meters range
Configured and calibrated via PC
Calibration using a base station and telemet tool set < Br> WiFi interface with WTS
robust lightweight house with built-in antenna
environmentally set for IP67
Pull-road cell for wire, cables, machinery - Wireless
Weight class: 5 - 100 ton
IP67 Environmental protection
Construction of stainless steel
Simple installation and operation
Wireless transmission range Up to 600 meters
long battery life