USB converters / USB extenders / USB adapters / Firewire

4-port HUB for USB 3.0 up to 5 Gbps
Works with or without power supply
Purchasing e.g. DC5V / 1.5ARQ
DC plug: 3.5 / 1.3 mm
Windows 2000/XP/Vista/7/8 and Linux and MAC OS 9.1 or higher

Isolates and protects USB device from USB host
Electrical insulation up to 3000V both directions
Common mode filtering on all data lines
Output voltage: 5V 420mA
USB2.0 12 Mbps or USB1.1 1.5 Mbps with jumper
No software or drivers required
Short circuit protection
LED for power indication
Operating temperature: -40 - +70°C
Robust metal housing with DIN rail mounting
USB cable is securely locked to the case

REMAINING STOCK

Optically isolated USB hub with 4 ports
Protects USB devices and PCs from overvoltage
4000 VAC isolation on the USB port for the PC.
Ports are ESD protected
Suitable for medico environment

Til bi-direktionel USB kommunikation til printere.
Plug & Play - Tilslut parallelprinter eller scanner til pc’en via USB porten. 
USB 1.1 Full Speed
understøtter 2 vejs kommunikation til og fra printer

USB 3.0 kabel mellem pc og USB enhed, type A hanstik til A, B eller micro B hanstik (sorte)

PCI Express (x 1) m/4 FireWire porte

Get an RS485 or RS422 port on the PC via the USB port
Galvanic isolation (optical) 2KV - 3 x 6N137 IC chip
DB9 male and screw terminal for serial connection
Baud rate up to 921.6 Kbit/s
Selection of port type with DIP switch
Support Win 10, Android
FTDI chipset FT232RL

USB to 1 x RS422 / RS485, w./ screw terminal

Max speed up to 921.6 Kbit/s - RS422 / 485 port

Select port type from DIL switch and jumper

Default set to RS422

Supports Win7, 8/8.1, 10, 11, Server 2008 R2, Server 2012 R2, 2022

(WHQL Certified)

Get a COM port on the PC via the USB port

USB to RS232, galvanic isolation
Transmits TxD, RxD and GND only

Supporting Win10

Wireless USB server with 2 x USB2.0 ports

4 port USB 3.0 HUB with DIN rail mounting
Can be powered from 7-24 VDC
Provides good noise immunity
Up to 900mA per port. by external supply.
USB cable for PC included
Voltage ONLY from terminal - int. jumper on DIS
Voltage from USB and clamp - int. jumper on ENA

REMAINING SALE EOL

4 port USB 2.0 extender, 150 meters over UTP/STP

USB 2.0 - 480Mbps

Supply voltage from USB port

Accessories - extra orange locking insert for USB lock.
Key not included.
Key can be purchased separately: USB-LOCK-OK

Lock insert for the USB ports on the PC and avoid unwanted connection of USB equipment
Lock for the USB port w/key and 4 locks (Orange)
Other colors can be supplied - each color can only be unlocked by a key of corresponding color
The key can be placed in the key chain.

Serial to USB converter with 1 x RS232/422/485 port

Respects +/- 11volt data signals

Galvanically isolated on the RSxxx output

Self-tuner Baud Rate

Automatic direction control

Powered from the USB port

USB connector: Type B

Supports USB 1.1, 2.0 and 3.0

COM port: terminal block

2meter USB cable with USB A male and USB A female connector
Ferrite
AWG28
USB3.0
Gold plated connectors
Black

Active USB 2.0 booster (extender) cable - 20 meters
USB 2.0 male (type A) to USB 2.0 female (type A) connector
Active amplifier/booster mounted on cable
Powered from USB port

1.8 meter USB 3.0 cable with USB-A male and USB-A female connector
AWG 28
USB 3.0
Black

Active USB 2.0 booster (extender) cable - 15 meters
USB 2.0 male (type A) to USB 2.0 female (type A) connector
Active amplifier/booster mounted on cable
Powered from USB port
OS support: Windows 2000, XP, VISTA, 7, 8, 10 & MAC

USB 2.0 Booster (extender) cable - 5 meters
Max. 3 x K-USB-REP can be connected up to 15 meters
Powered by the USB port
OS Support: Windows 2000, XP, VISTA, 7, 8, 10 MAC

Adds eight high-speed RS-232/422/485 serial ports via USB connection
2k bytes transmitter and receiver
Requires no IRQ, DMA, I/O port
RS-232 max bit rates of up to 1 Mbps
RS-422/485 maximum bit rates of up to 10 Mbps
Automatic transmission buffer control for 2-wire RS-485 half-duplex operation
Biasing and terminating resistors installed on board
Supported RS-232 signals: DCD, RxD, TxD, DTR, GND, DSR, RTS, CTS, RI
Supported RS-422 signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 4-wire signals: TxD-, TxD+, RxD+, RxD-, GND
Supported RS-485 2-wire signals: Data-, Data+, GND
Data Bits: 7/8
Parity: None, Even, Odd, Mark, Space
Stop Bit: 1, 2
Flow Control: Hardware (RTS, CTS), XON/XOFF
Monitor LEDs for TxD, RxD indicating port status
Built-in AC to DC switching power supply, 100VAC to 240VAC
Virtual COM port drivers available for Windows 11, 10, 8.1, 8, 7, Vista, 2003, XP, 2000
Win Server: 2000 up to 2018, Linux, MAC
Industrial quality metal case with DIN bracket for DIN rail mounting

Få 4 stk. RS232 porte på PC via USB porten

Forbind 4 x RS232 enheder til USB port
Metal kabinet og med vægmontering
Baudrate op til 115,2 kbit/s
Supporterer ikke hardware licens nøgler

Supporting Win10

Get 2 pcs. COM ports on PC via the USB port

Separate USB cable AM and BM

Supports Win7/8/10/11

Cable included

Connect RS232/RS422/RS485 equipment to USB port
Baudrate up to 921,6 kbit/s
Select type of port by DIL switch
Supports Win7/8/10, MAC

RS-232 serial port by connecting to a USB port

Provides DC5V/250mA to external devices - Pin 9

Compact converter

Cable length of 100 cm

Power from host USB port

LEDs indicate TxD and RxD activity

Installs as a standard Windows COM port

Full RS-232 modem control signals and hardware/software flow control

Serial port protected with 15KV ESD protection

Non-standard baud rates supported

Easy plug and play installation and RS-232 device connection

High-speed serial port with baud rate up to 921.6 kbps

Supports Windows 11, 10, 8.1, 8, 7, XP, Windows Server 2025, 2022, 2019, 2016, 2012 R2, 2012 and 2008 R2

Supports Linux Kernel version 3.0 and later

Supports Apple-provided VCP on OS X 10.9 and later

Data bit - 7/8

Stop bit - 1, 2

FTDI chip - FT232xx.

Get 1 piece. x RS485 or RS422 port via adapter connected to PC's USB port
Galvanic isolation (optical), 2KVolt
Baudrate up to & nbsp; 921.6 Kbit / s
Windows Win 7/8, Vista, Linux & Server 2000 to Server 2016 (WHQL certified)
Linux Kernel 2.4
Mac OS X 10.9, Driver Approved by Apple

CAN bus port on your computer via USB 1.1, 2.0 or 3.0 port
Powered from USB port
LED shows initialization and CAN bus status
Installs as a standard Windows COM port
CAN modes: Standard, Listen, Echo
Controlled using ASCII commands
API provided along with examples
Plug and play installation
CAN bus speed up to 1 Mbps
Supports CAN 2.0A and CAN 2.0B protocols
Drivers provided for Windows and Linux OS
Supports SocketCAN (slcan driver) since kernel 2.6.38+

Icron USB Extension - Local Extender device and Remote Extender device
USB 2.0: Up to 480Mbps
USB 1.1: Up to 12Mbps
1 x USB-B (LEX unit)
1 x RJ45 (LEX unit) to 4 x USB-A (REX device)
1 x RJ45 (REX device)
Dimensions: 100mm x 76mm x 26mm
up to 600mA to each USB port (REX device)
Up to 100 meters above the UTP / STP to 4 x USB - version: USB 1.1 and 2.0
5VDC / 3A PSU (REX device)
Operating temperature: 0 ° C to 50 ° C,

RESTSALG

Icron USB Extension - LOCAL and remote unit
Up to 100 meters over UTP / STP
2 x USB port - Version: USB 1.1 and 2.0
24VDC / 1A PSU incl. the remote unit
PSU kan be connected two LOCAL or remote unit
Support up to 11 USB units from 3 USB Hubs

Icron USB Extension - with LOCAL and remote unit
Up to 100 meters over UTP / STP Cat 5e / 6/7
USB version: USB 1.1 and 2.0
24VDC / 1A PSU incl. the remote unit
Support up to 11 USB devices from three USB Hubs