In this overall category you will find a wealth of products and subcategories. Danbit offers for everything from RFID readers Card readers. We stand ready to help you with choices and possible. setup. Looking for something specific, which may be tailored to your job, contact Danbit tel. 56 66 20 20.
In our knowledgebase, you can read more about blah. barcode formats.
Waterproof RFID reader
only with Wiegand Interface
Connect to access controls with Wiegand
TAG Type: EM / Mifare
Reading distance: 5.8 cm
IP68
Frequency: 125kHz / 13,56MHz
LED and Buzzer
Cable out from the back
Detachable Backpiece
Supply Voltage: 12VDC
Dimensions: 86 x 86 x 22mm
RFID Copy Reader / Writes to T5577 RW Tag
interface: USB
Work voltage: 5 VDC
Work current: 200mA
Standby Stream: 50mA
Normal current: 100mA
125kHz, 13,56MHz Mifare / NFC
Compatible with CCID and PC / SC
IC / ID Dual Frequency Replication
Supporter ID125K, 8800, 5200, 4305, 5577, 8265 Card
Support UID, Fuid, Cuid, UFUID
IC Semi-Encrypted Card, IC Full Encryption Card
Dim: 108 (L) x 68 (W) x 12 mm (H)
Frequency: 860-960MHz
PVC / PET
ISO18000-6C (EPC GEN2)
Dimensions: 86x54x0.8mm
Operating temperature: -25C - 85 degrees
866 - 868MHz CE, equipped with 12dBI linear antenna
EPC Class 1 gene 2 (ISO18000-6C)
from 0 ~ 20 meters reading distance (depending on the surroundings)
from 0 ~ 7 meters of writing distance ( Depending on the surroundings)
Linux OS, Indy R2000 RFID chip, fast and precise reading rate
Ethernet connection
445 × 445 × 100 mm (l × W × H)
Operating temperature: -20 ~ + 60 ° C
IP65
Option: RS232 / 485, USB, GPIO, Wiegand 26/34, 4G LTE and WiFi
Option: Poe
Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC
RFID with QR code reader
125kHz EM400x
13,56MHz Mifare Ultralight
Built-in buzzer for audio notification
can read multiple formats
With CPU watchdog
Power supply: 12V DC
Output: RS232, RS485, Wiegand 26/34 bits
Module with 1 relay output
5VDC from opto-isolated digital input
GND, VCC, IN (digital input)
COM, NC, NO
approx. size 43 x 17 x 19 mm
Max load: AC 250V/10A, DC 30V/10A - no inductive load!
MDB Male and Female
DEX Male and Female
MDB Male and Female
EXT-MCR
TEMP
GND
DOOR OPEN
DEX Male and Female
RS232
1D, 2D barcode reader
Wireless 2.4GHz via base station (supplied) or USB-A to USB-B cable (included)
Reading distance: 10mm-700mm
Operating time: Approx. 12 hours
Recharge time: Approx. 6.5 hours via USB or base station
Memory: 512K (over 5000 scans)
Dimensions: Scanner: 175 (L) x 72 (B) x 100 (H), Base: 200 (L) x 90 (B) x 51 (H) mm
Weight: 210g (Scanner), 230g (Base)
1D, 2D barcode reader
Wireless 2.4GHz (RF dongle) or USB-A for USB-B cable
Reading distance: 10-500mm
Operating time: Approx. 16 hours
Recharge time: Approx. 6.5 hours via USB-B
Memory: 512K (over 5000 barcodes)
Dimensions: 150mm (L) x 70mm (W) x 95mm (H)
USB 2 x PC splitter
2 x DB9 special cable output (DB9 to USB)
1 x RS232
USB Power (5VDC)
Speeds from 1200bps to 115200bps with select
OS support: Windows OS, MAC OS X, Linux
Incl. 2 pcs. DB9 male to USB-A male cable 1,2m
Operating temp. 0 - + 50 ° C
NOTE: Contract with Danbit A / S and User Agreement with service supplier MUST be established before purchase!
Payment system with touch display.
accept contactless, chip, magnetic stripe and mobilepay.
GSM antenna connector MMCX to 6 digital outputs. Can be programmed with the time difference when paying. To 6 deaktiveringsindgang2. Can be configured to disable the machine
can be connected to a vending machine, washing machine, door, etc.
Web-based control panel.
Communications Internet or WiFi or 4G
Support for setup can be purchased.
Supplied with SIM card (4G)
Supply voltage: 10 - 24VDC, 10 - 42VAC / 2Amp (power supply included)
Payment system for vending machines, doors etc.
Accepts contactless & nbsp; chip, magnetic stripe and MobilePay
GSM (SMA) and LAN (RJ-45)
2 x digital outputs. & nbsp;
1 x deaktiveringsindgang. Can be configured to deactivate the machine
Can be connected to a vending machine, washing machine, door, etc.
Web-based control panel, can be operated over the Internet
Support for setup can be purchased
Comes with SIM card
User agreement with service provider is required
1D 2D QR barcode scanner
USB, wireless 2.4GHz, Bluetooth
Bluetooth up to 30 meters
2.4GHz RF up to 150m
Continuous working time up to 36 hours
Memory: 15,000 barcodes
Power supply: 5VDC (via USB cable)
Dimensions: 169 x 68 x 99 mm (L x W x H)
Temperature: 0℃ ~ 50℃
RFID UHF 865MHz PVC Bracelet
One-off closure
Adjustable size
Waterproof
Operating temperature: -30 ~ 75 ° C
White
Width 2.7 mm
Length Shared 100 mm
total length 278 mm
Honeywell 1902GER-2 Barcode Scanner
KUN stregkodelæser, uden ladestation
1800 mAh Li-ion minimum batteri
Op til 50,000 scanninger pr. Opladning
Trådløs
Network RFID reader
10 / 100Mbit Ethernet interface
Supports MDI / MDIX
1 x RJ45 and 1 x DC connector
TCP Server, UDP, DHCP
for 13.56MHz Mifare card
Supply: 5V DC PSU Max 300mA
IC / RFID / MAGNET motor reader
USB interface
three in one card reader
example. kiosks and the like
Automatic in / out
RFID reader for RS232 / RS485 / Wiegand
IP64
Range up to 60cm
Serial communication to / from PC
Relay output (24VDC / 2A) Serial Enabled from PC
Baud Rate : 9600, 8, n, 1
Dim: 210 x 210 x 28 mm
Extended temperature -10 - 60°C
supply: DC 12V, 350mA
10/100M Ethernet interface
TCP Server, UDP, DHCP
Til 125Khz ID Kort
Forsyning: 5V DC PSU max 300MA
Kvitteringsprinter
Termisk
Stikdæksel
Hovedapparat
Dæksel med aktiveringsknap
Rullepapir
Styreplade til 58 mm bredt papir
PS-180 & AC-kabel
Tilsluttes RS232 (serieporten)
125kHz RFID TAG with screw hole
50 mm diameter x 2.5 mm
Suitable for guard rounding as a checkpoint
ASK 64 bits,
Manchester encoding; 10 digits in HEX
With RFID, the code reads Decimal: 12 digits
Farvebånd til 200 kort (til PRINT-ID/PRINT-ID-MAG)
Evolis R3011 color ribbon
S/H bånd til 1000 kort (til PRINT-ID/PRINT-ID-MAG)
Evolis R2011
stationary fitted barcode scanner
can read Health Card App From Mobile
1D and 2D - CMOS
Read 1D Barcodes
Read 2D Codes QR
Codes from Smartphone Screen
Black Cabinet , IP50
USB - Can be selected as HID Keyboard
USB - Can be selected as Virtual COM
USB - Can be selected as IBM Surepos
Automatic Scan Detection
Many Setups
Very Fast Reading - Up to 2.5 meters per second.
fortress holes in the bottom of foot
MCR-BARCCD-K kan læse både magnetkort (spor 1 og 2) og stregkoder.
Magnetic card reader - HID. Keyboard emulation
Magnetic card reader for PS2
Can be connected via USB with adapter
USB adapter may require a restart of the PC!
PS/2 to USB adapter included
A reader head / tone head
Black
Works with OS up to and including Win 10
Can read Æ, Ø, Å. oh, oh, oh
Suitable for clinics for reading health cards
Dimensions: L 137 x H 50 XB 49 mm
Opsætnings softwaren virker kun på en Windows XP pc der har en PS2 keyboard port
Kan indsætte diverse formateringstegn, f.eks. linjeskift.
Programmerbar magnetkortlæser med PS/2 interface. Lysdioder sikrer optisk kvittering, akustisk lydsignal ved korrekt aflæsning af magnetkort.
Bonprinter
Bemærk produktet er EOL så det er begrænset mængder vi kan skaffe!
Kontakt os med hensyn til muligheder og leveringstid.
Paper- Printer Accessories - Thermal
Replacement / spare “gun” unit for RF9000 ADA268K0112 systems
Supports multiple interface types (multi-interface)
Ideal for adding or replacing a control handset in RF9000 installations
Facilitates rapid deployment or backup in industrial / RF systems
Black thermal transfer ribbon compatible with Zebra ZT230
Optimized for wax or wax-resin printing
Sharp, high contrast output on paper and coated media
Available in multiple widths/lengths to suit your label roll
Easy to install and calibrate in the ZT230
Essential consumable for continuing label printing operations
20 pcs. Mifare Transponder / TAG to Keychain
Mifare Classic 1K RFID TAG
Reading distance: 0 - 5 cm
ISO14443A
1 kilobyte Memory
768 byte free in 16 sectors / 4 blocks / 16 bytes
UID code is factory programmed
Gray key ring
Frequency: 13.56MHz
Material: ABS, IP68
Seiko Instruments RP-E11-K3FJ1-E-C5, POS, Termisk, 350 mm/sek., 8,3 cm, 5,8 cm
RFID 125kHz reader with RS232
EM 4xxx Standard Tag (40 bit HEX)
Mounting in Ø 31 mm Hole
Length from Resess: 27 mm
Resess Width: 40 mm
RS232 , 9600, N, 8, 1
9 - 12VDC / 50mA
Temperature: -10 - + 70 ° C
Material: PBC
IP54 from front
Keyboard Emulation: 8 digits, 32bit HEX
Frequency: 13,56MHz Mifare Ultra Light
versions: Mifare S50, S70, ISO15693, ISO14443A / B
UID in positive Normal sequence
Power supply: 5VDC from USB port
Operating temperature: -10 - + 75 ° C
Reading distance: 5 ~ 15 cm
Cable length: Solved USB cable
Dimension: 118 (L) x 75 (W) x 17 ( H) mm
Weight: 250g ± 10%
desktop - table model
RFID-læser til passive RFID-tags, 865MHz til USB med HID
Active RFID tag bracelet 2.4 - 2.48GHz
Output power -6dbm
Active operating mode
3 year battery life (depends on usage, can be changed)
0-80M distance
IP68
Weight: 40g
Operating Temperature: -40 ℃ ~ + 60 ℃
Dimensions: 250mm × 31mm × 15mm (L × W × H)
2.4GHz RFID reader with up to 200 meters
Omni-directional (SMA)
RS232, 10 / 100M Ethernet interface
Optional: GPRS or WIFI
Optional: 2 channel relay, 2 channel trigger input
Development kit (C ++, C #)
Compatible with active and passive tags
0-100m radius (depends on power output)
can identify 300 tags time-consuming
IP65
DC 5V power supply, 300mW
dimensions: 190mm × 120mm × 40mm without antenna
Dimensions: 320mm × 226mm × 133mm with antenna
Weight: 2 KG
Operating temperature: -40 ℃ ~ + 60 ℃
API interface for fast integration with existing software
