See DANBIT's huge selection of HDMI Extender / Booster. With an HDMI extender you avoid having to pull HDMI cables long distances and risk signal degradation. It only requires you to connect the HDMI extender to your network installations. You connect the Extender to your HDMI cables, as well as your network cables, either Cat.5, Cat.6, Cat. 6 or Cat. 8. In this way, you ensure the good quality and image resolution. If you have any questions about products or prices, please contact us. We look forward to hearing from you.
Wireless HDMI extender
Maximum resolution: 4096x2160 at 60Hz
Resolution can vary a lot since it is wireless!
Send to up to 1 to 4 devices
Avoid interference with channel switching
5G frequency for strong anti-interference
Supports KVM and touchscreen
IR passback for use with remote control
Firmware upgrade via Micro USB
Range: 50m
HDMI loop-out
Supports up to 1080p @ 60 Hz HDMI resolution
Extends HDMI signal up to 100 meters over coaxial cable
Built-in BNC loop-out for daisy chaining additional displays
DIP switches to configure video & audio modes (LPCM 2 / LPCM 7.1)
Input / output via HDMI Type A and coax BNC connectors
Power: DC 5V 2A supply; power consumption ~850 mA (TX), ~750 mA (RX)
Supports input via HDMI, DisplayPort, or USB-C (DP Alt-Mode)
Extends one selected input at 4K@30Hz (4:4:4) over network cabling
Up to 120 m over CAT5e, 140 m over CAT6
Daisy-chain capability to support up to 250 displays
Automatic / manual input switching plus one-button EDID management
Operating Temperature: 0 to 70℃
Power Supply: DC15V 2.6A (39W) / DC5V 3A(15W)
Controls via RS-232, I/O trigger, panel buttons
4K@60Hz (4:4:4) HDMI transmission over fiber
Up to 60 km single-mode or 300 m multimode distance
USB KVM, IR, RS232 control capability
Latency less than one video frame
Supports HDMI 2.0, HDCP 2.2, HDR, 3D
Power: 5 V DC, 2 A; maximum consumption ~5 W.
Operating temperature: -10 to 45 °C; storage: -30 to 70 °C.
Full audio support: LPCM 7.1, Dolby TrueHD, DTS-HD MA, ATMOS, DTS:X
4K@30Hz (4:4:4) video capability
Transmission distances: 120 m (CAT5e), 140 m (CAT6), 60 km (fiber)
Local HDMI loop-out on transmitter for nearby display
4 USB 2.0 ports at receiver end for remote peripherals
Bi-directional audio, IR & RS232 control support
Operating Temperature: 0 to 55℃
Power Supply: DC 5V 2A
EDID management & compatibility with IP repeater modules
Supports 4K@60Hz (4:4:4) video over IP
Extends up to 100 m via Cat5e / up to 60 km via fiber
USB KVM, RS232, bi-directional IR & audio support
Built-in HDMI loop-out for local display
Works over Ethernet switches for distribution, switching & routing
Operating Temperature: 0 to 55°C
Power Supply: 12V 1.5A
Advanced modes: video wall, sub-stream, hybrid resolution, image rotation
True 4K@60Hz (4:4:4) video with full-bandwidth HDMI over IP
Up to 100 m over Cat5e/6 or 60 km over single-mode fiber
PoE (Power over Ethernet) input (approx. 15W) removes need for separate power supply
Built-in HDMI loop-out at transmitter for local display monitoring
USB KVM + RS232 + bi-directional IR and embedded audio support
Operating Temperature: 0 to 55℃
Power Supply: TX: DC 12V 1.5A, RX: DC 12V 1.5A
Compatible with Ethernet switches for scalable distribution, video wall, matrix deployments
Supports up to 4K@30Hz (4:4:4) resolution
Transmission distance up to 1 km via single-mode fiber, 300 m via multimode fiber
Built-in LC fiber connector for simplicity and compatibility
EDID bypass ensures proper display and source device negotiation
Low latency plug-and-play design—dongle-style form factor with USB power
Operating Temperature: -20 to 70℃
Power Supply: TX: 5V 1.5A, RX: 5V 1.5A
LED status indicators for easy monitoring
Supports 4K@60Hz (4:4:4) resolution over CAT6 up to 100 m
Chainable receivers allow expansion to up to 250 displays
Local HDMI loop-out for source‐side monitoring
RS232 control and EDID management (four EDID modes)
Audio extraction for external speaker output
Power supply: TX: 5V 2A, RX: 5V 2A
Operating Temperature: 0-55℃
Works with both Ethernet switch-based distribution and daisy-chained receivers
Supports up to 4K@30Hz (4:4:4) resolution for crisp, clear video
Extends HDMI up to 120 m over CAT5e or 140 m over CAT6 cabling
HDMI loop-out for local display connection
Compatible with SR01X IP repeater for extended distance and flexibility
Works with Ethernet switches for signal distribution across multiple displays
Ideal for digital signage, classrooms, conference rooms, and retail AV setups
Supports True 4K@60Hz (4:4:4) video transmission up to 70 m over CAT5e
Power over HDBaseT (PoH) – power the system from either TX or RX
Bi-directional IR & RS232 control for remote management at both ends
CEC & EDID pass-through for seamless device compatibility
Extends 4K@60Hz up to 70 m, 1080p even further with higher-grade cabling
HDMI 2.0 & HDCP 2.2 compliant for modern AV and protected content
Operating Temperature: 0-55℃
Power Supply: TX: 12V 1.5A, RX: 12V 1.5A
Ideal for pro AV & signage.
True 4K@60Hz (4:4:4), HDMI 2.0 & HDCP 2.2 support
Signal extension up to 100 m over CAT5e/CAT6
HDMI loop-out at transmitter for local display
IR and RS232 control (bi-directional)
Analog audio pass-through
USB ports at receiver side for remote control devices
Power supply: TX: 5V 2A, RX: 5V 2A
Operating Temperature: 0-55℃
Perfect for pro AV, signage, control rooms and long cable runs.
Supports 4K@60Hz (4:4:4) video
Transmission distance: up to 70 m over CAT5e or greater
Dual HDMI outputs at receiver; loop-out on transmitter
IR & RS232 bi-directional control
HDMI 2.0 / HDCP 2.2 compliance
Full-bandwidth audio (7.1 LPCM, etc.)
Operating Temperature: 0-55℃
Power Supply: TX: 5V 2A, RX: 5V 2A
Extends 4K HDMI up to 70 m over CAT5e/6 with IR control.
Supports EDID & CEC pass-through, 1080p up to 70 m4K@30Hz over CAT5e/6 with support for 1080p up to 70 m
Bi-directional IR (selectable side)
EDID & CEC pass-through for compatibility and control
Supports multiple audio formats including 7.1 LPCM, Dolby TrueHD, DTS-HD MA.
Operating Temperature: 0-55℃
Power Supply: TX: 5V 1A, RX: 5V 1A
Perfect for signage, home theatre & AV systems.
Supports up to 4K@30Hz (4:4:4) over CAT5e/CAT6/ CAT6a/ CAT7
Transmits up to 100 m
EDID & CEC functionality
Supports multiple audio formats (7.1 LPCM, Dolby TrueHD, DTS-HD MA)
Compact, reliable design with low latency
Operating Temperature: 0-55℃
Power Supply: TX: 5V 2A, RX: 5V 2A
Perfect for simple HDMI runs in signage, home AV setups, or conference rooms.
Supports video resolution up to 4K@60Hz (4:4:4)
Extends HDMI, USB 2.0, and audio up to 100 m over Cat6 (HDBaseT)
4× USB 2.0 ports on the receiver for remote devices
Supports Ethernet transmission and CEC pass-through
Operating Temperature: 0-45°C
Power Supply: TX: 12V 1.5A, RX: 12V 1.5A
Perfect for digital signage, control rooms, and industrial AV applications.
Supports resolutions up to 4K@60Hz (4:4:4)
Transmission up to 100 m via Cat5e/6 or 60 km via fiber (SFP module)
HDMI loop-out on the transmitter
4× USB 2.0 ports on the receiver (KVM functionality)
Bi-directional analog audio, RS232, and IR control
Low power consumption, compact design
Power supply: TX: 5V 2A, RX: 5V 2A
Operating Temperature: 0-55℃
Ideal for control rooms, digital signage, and industrial environments.
HDMI Extender - extender, over CAT 5/6 cable
HDMI 1.3, 3D
1080p/60Hz
70 meters at 720p
40 meters at 1080p
Bandwidth: 2.25Gbps
Audio: LPCM 2.0
USB Micro (TX device)
The RX unit is powered by the TX
At short distance - no external voltage
Resolution up to 1080p@60Hz.
Signal extension up to 50M over CAT5e cable.
No external power required at RX unit under a distance of 30M.
Resolution up to 1080p@60Hz.
Transmission distance up to 40M at 1080p over CAT5e; 45M over CAT6.
No power is required for the receiver unit.
Built-in HDMI male connector to directly plug in an HDMI device.
Supports EDID Management to adjust and restore resolutions.
Supports LPCM 5.1.
When the distance exceeds 30M, using CAT6 cable is recommended.
HDMI Booster up to 40 meters at 4K30
HDMI Booster up to 70 meters at 1080p
No delay - zero laency
HDCP 1.4, HDMI 1.4
Resolution from 800x600 to 3840x2160/24, 25, 30Hz
HDR support
With EDID review
POC - only the transmitter must be supplied with 5VDC (PSU included)
Operating temperature: -20 - +60°C
Dimensions: 75 x 60 x 16.5 mm
Weight: 127g
3G-SDI and HDMI Inputs and Outputs
Transmitter: 1x USB-C (5 VDC) Input
Receiver: 1x USB-C (5 VDC) Input
Live Streaming via Mobile Device & App
Range 152.4m max (Line-of-Sight)
HDMI/SDI
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080i: 60/50
720p: 60/50
Operating temp. 0 to 50°C
Dimensions: 113 x 65 x 29.2mm
Transmits HDMI video and audio and USB up to 150 meters over network cable
Transfers HDMI video and audio and USB over local TCP/IP network
USB is for keyboard and mouse only
Set with transmitter and receiver
1920 x 1080 @60Hz
A transmitter to multiple receivers over non-managed switch.
Supports keyboard and mouse ONLY
Supports TCP/IP and local EDID
HDMI 1.3 / HDCP 1.2
Transmitter: 1 x HDMI, 1 x USB-B, 1 x RJ45 Ethernet
Receiver: 1 x HDMI, 2 x USB-A, 1 x RJ45 Ethernet
built-in auto-adjustment system
Built-in ESD protection system
Power supply: DC 5V/1A (supplied)
Dimensions: 92 x 70 x 25 mm
HDMI and USB over fiber
Video resolution max up to 4Kx2K@60Hz(4:2:0), 4K*2K (3840x2160@30Hz), 1080P@120Hz and 1080P 3D@60Hz.
Transmits HDMI signals up to 10 km (6.2 miles) through a single LC/LC single core fiber optic cable.
Compatible with Multi Mode fiber cable, up to 300 meters
Equipment with two 10G SFP Optical modules.
USB 1.1 only Keyboard and mouse
Supports up to 7.1 channel and LPCM, Dolby TrueHD, DTS-HD Master Audio.
Compliance with HDMI 1.4 standard.
High compatibility, can automatically match source and display device.
Built-in automatic adjustment system, makes the image smooth, clear and stable.
Simple to install, plug and play.
DC5V/2A power supplies (2) included
4K 60HZ up to 60m (HDMI 2.0)
4K 30HZ up to 120m (HDMI 1.4)
HDMI2.0/HDCP2.2
Point-to-Point
CAT6 cable recommended (at least CAT5e required)
IR transmition
5VDC Transmiter and Receiver
Hot plug support and plug and play
Virtual display to avoid signal loss and screen changes when the display connection is interrupted
Memory function in case of power failure
Maximum resolution: 2560 x 1440@60HZ / 3840 x 2160@60HZ
4K HDMI Extender over Patch Cable (Cat 5e / 6)
HDMI 1.4 / HDCP 1.4
With HDMI Loop out
Audio Input and Output
Up to 120 meters (Point-to-Point)
4K @ 30Hz
Plug and Play
Power supply: 5V 1A (2 pcs. Included)
Dimensions: 60 x 56 x 19 mm
1 x Transmitter, 1 x Receiver
Driverless
Up to 8 transmitters for each receiver
Up to 50 meters Point to Point, Wi-Fi up to 10 Meters.
Plug and Play
5Ghz 802.11
1920 x 1080p
Audio
OS Support: Windows, Mac OS, Linus, Android, IOS, NS, PS4/5, Xbox
Protocol: Miracast, DLNA, Airplay
HDBaseT Repeater med HDBase ind / ud
Maks. afstand 100 meter
Egnet til Mid-range Repeater.
Input og output for HDMI
Kan fjernbetjenes med RS232
Med EDID
Forsyningsspænding: 12VDC
Mål: 190 x 125 x 34 mm
Send incompressed 4K / HD video and audio over CAT6A / 7 cable up to 100 meters
HDbaseT communication protocol (5 in 1)
HDbaseT Supporter: Audio Video, Operation, Ethernet, USB, Power
Can be powered from HDbaset with PSE
PSE is equipment that sends Poe out on the RJ45 port
power from Mini-USB by no PSE connected
map HDMI cable, eliminates the need for extra cables
Resolution Up For UHD (3840 x 2160), Deep Color and HD audio formats
4K @ 60Hz 4: 2: 0
4K @ 30Hz 4: 4: 4
HDCP compatible and Blu-Ray ready
Plug-and-Play No Software Installation
Requires Best Quality Cable! No Support if not the cable is from Danbit
HDMI receiver for HDMI-MULTI-T4
Up to 70 meters with 1080p@60Hz
Input for 5VDC if cable is too long
1 x HDMI male
1 x RJ45 female for patch cable
Point to point cabling
With EDID transmission
1 pc. 4 channel HDMI transmitter
4 pcs. HDMI-MULTI-R4 receivers
Up to 70 meters to receivers
Resolution up to 1080p@60Hz.
HDMI distribution up to 70M.
No external power is required for the RX unit.
Built-in HDMI loop out port on TX unit for an additional HDMI display.
Can be stacked to another TX for 1 in 8/12 out.
Supports RS232, CEC, EDID.
Supports RS232 control.
4K HDMI Extender Over IP
HDMI 1.4 / HDCP 1.4
Up to 120 meters (point-to-points)
4K @ 30 Hz
2 x USB-A 2.0 (HID emulation)
One-to-One or One-To-Many
Max 32 RX Can be connected One TX (Via Ethernet Switch)
Remote-IR from TX to RX
Plug and Play
Power Supply: 5V 1A (2 included)
Dimensions: 107 x 105 x 27 mm
Operating temperature: -15 - + 55 ° C
Weight: TX 499G, RX 494G
acquisition: K-USB4AM-AM -Fe to connect the USB-A port to PC
Receives HDMI video signal via Cat.6A cable up to 100 meters
Resolution: 4K @ 60Hz 4: 2: 0)
Resolution: 4K @ 30Hz 4: 4: 4
Full HD (1920 x 1080)
User hdbaset technology
PoE (POH) - only a power supply of the receiver unit.
HDCP compliant and ready for Blu-ray
Supports IR remote
automatic power saving function (can selectable)
Plug and Play, no software installation
Powered by 48VDC
Dimensions: 140 x 85 x 34 mm
REQUIRE THE BEST QUALITY CABLE! No support if the cord is not from Danbit
Transmits uncompressed HD video and audio over CAT6a / 7 cable up to 100 meters
Can be powered monitors or receivers with hdbaset with PSE
PSE is the equipment that sends PoE out on RJ45 port
Power from mini-USB with no PSE connected
Map HDMI cable, eliminating the need for extra cables
Resolution up to UHD (3840 x 2160), Deep Color and HD Audio formats
4K @ 60Hz 4: 2 : 0
4K @ 30Hz 4: 4: 4
HDCP compliant and Blu-ray ready
Plug and Play no software installation
Compact size.
Easy to install
REQUIRE THE BEST QUALITY CABLE! No support if the cord is from Danbit
HDMI sends and receives over RJ45 Cat. 6/6e
1080P@60Hz
HDMI 1.3, HDCP 1.2
EDID
Suitable for transferring HDMI over an existing RJ45 installation
Up to 50 meters (Depends on cable quality)
Use only quality cable
HDMI male, RJ45 female
POWER over cable, the supply to the reciver module is transferred via cable.
Can be supplied with 5vDc via Micro USB Power on each module
HDMI Matrix over IP.
Video Wall configuration
Setup with DIP switches (TX-RX Pair)
Max 24 transmitters and 96 receivers (contact us for buying TX or RX units separately.) < br> HDMI 1.3, HDCP 1.3.
HDMI loop out to the local monitor
Resolution 1080p @ 60/50/30/25 / 24Hz, 720p @ 60 / 50Hz.
point to point over Cat 6. Maximum . 100meter. Point to many Hotels can be supplied via PoE (802.3af) or 12VDC 1A (PSU included).
Power Consumption: 2.5W.
Switch must support protocol: IGMP Snooping or IFMP.
Delay: 120ms
Operating temperature: 0 ~ 40 ° C.
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
70 meters
non-galvanically isolated
Supply From HDMI Source
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
100 meters
non-galvanically isolated
Supply From HDMI Source
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
50 meters
non-galvanically isolated
Supply from source HDMI
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
30 meters
non-galvanically isolated
Supply From HDMI Source
Ultra resolution 8K 7680 x 4320
Backwards compatible
Built-in network channel (ethernet)
Earc (Enhanced Audio Return Channel)
Also supports ARC (Audio Return Channel)
One- way transmision
Bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable Thickness: 4.8mm
20 meters
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
15 meters
non-galvanically isolated
Supply From HDMI Source
HDMI BOOSTER HD 1080p
HDMI signal over single CAT 5e/6 cable
Resolution 1920 x 1080 @60Hz
POC: Power Over Cable. Transmitter powers Receiver
HDMI 1.3/HDCP 1.2
Supply voltage: 5VDC
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel) Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
10 meters
non-galvanically isolated
Supply From HDMI Source
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
5 meters
non-galvanically isolated
Supply From HDMI Source
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
3 meters
non-galvanically isolated
Supply From HDMI Source
Hybrid HDMI fiber optic with DC to receiver
ultra resolution 8K, 7680 x 4320
backward compatible
built-in network channel (Ethernet)
EARC (Enhanced Audio Return Channel)
Also supports ARC ( Audio Return Channel)
one-way transmission
bandwidth: 48Gbps
Supporter HDCP2.2 / CEC / EDI
Cable thickness: 4.8mm
2 meters
non-galvanically isolated
Supply From HDMI Source
Professional Wireless HDMI 1.3 Link, High High Quality, High Performance
Max. distance up to 300 meters, depending on conditions
HDMI HD and 3G SDI input and output
No delay and no compression
Audio formats include Dolby True HD, DTS master, etc.
AES-128 encryption with air interface HD video data stream
Can transfer HDMI from point to point
Transmitter and receiver are paired for optimum performance from the factory
Within the same coverage area, 4 sets of work can be done simultaneously
Signal strength indicators
Metal housing , compact design
Note: This product is to be ordered specially and orderly delivered can not be canceled. No right to return.
Professional wireless HDMI 1.3 link, very high quality, very high performance
Max. distance up to 120 meters, depending on conditions
HDMI HD and 3G SDI input and output
No delay and no compression
Audio formats include Dolby True HD, DTS master, etc.
AES-128 encryption with air-interface HD video data stream
Can transfer HDMI from point to point
Transmitter and receiver are paired for optimal performance from the factory
Within the same coverage area, 4 sets can work simultaneously
Signal power indicators
Metal housing, compact design
Note: take home only on order.
Orders placed cannot be cancelled.
No right of return.
HDMI VD adapter - EDID - display emulator
Understøtter op til 4K, 3840 x 2160 opløsning, @ 60Hz, 1080P @ 120Hz (HDMI2.0-support er nødvendig)
Lille størrelse med nyeste chip,
Lav effekt
Ingen varme.
Plug and Play
Hot swappable.
Understøtter alle systemer
HDMI video transmitter PoE
Suitable for video wall
With HDMI Loop Out
Delay of approx. 1 second from transmitter to receiver
HDMI 1.4a - H.264
By IP multicast use switch with IGMP Snooping
Range up to 100m
Cables Kat. 5th / 6
EDID Emulation
IR Transfer
1 x RJ45, 1 x DB-9, 1 x HDMI Input, 1 x HDMI Output
Supply IEEE 802.3af / at PoE +; 5V DC, 2A (not supplied)
As receiver, use HDMI-MULTI-HD-M
HDMI Video Receiver with PoE
Transmitter Module is purchased: HDMI-Multi-HD-T
Video Wall with a maximum of 64 units
H.264 Video Encoder / Decoder, IR transfer
Delay of approximately 1 second from transmitter to receiver
HDMI 1.4a
Connection over IP - Use switch with IGMP Snooping
Max. 64 Groups
Range Up to 100m - Point to Switch or to Transmitter
Cables Cat 6a. Good quality
Edid Emulation - possibly not on all screens, then buy it from Danbit
1 x RJ45, 1 x DB-9, 1 x HDMI exits
Supply IEEE 802.3AF / to POE + or 5V DC, 2a (not included)
Requires quality switch When used over IP
Dim: 130 x 82 x 30 mm
4K HDMI/USB video receiver PoE over LAN
Suitable for Video wall
Use Multi casting switch (IGMP Snooping)
1080p or 4K (3840 x 2160) HDMI resolution
HDMI 1.4a - approx. 0.1 second delay between transmitter and receiver
1 x RJ45, 1 x DB-9 female, 1 x HDMI female
4 x USB 2.0 type A (mouse/keyboard/USB touch)
Can be fitted up to 8 x 16 video wall
Transmitter/receiver selector - 16 channels (DIP)
Supply: IEEE 802.3af/at PoE+; 12V DC 3A (not included)
Range up to 100m over direct Cat. 5e/6 UTP cables
EDID emulation and IR transfer
As transmitter, use HDMI-MULTI4K-T
REMAINDER SALE
HDMI Booster, point to point, point to multipoint
Cascade coupling from receiver to next receiver
Set with 1 x transmitter and 1 x receiver - VDSL communication
Up to 3800 meters
Full HD 1080p
HDMI 1.4
With IR return for HDMI player
DC 12V 2A power supply
HDMI 1.3/1.4/2.0 compatible
Supports HDTV resolution up to 1080p
4Kx2K@30
Plug & Play.
Build-in LED incl.
HDMI (3D, Deep Color, CEC)
HDCP compliant
Powered from HDMI device
The diverter surge to ground
Acc. IEC 6100042 standard
Have mini USB plug for 5VDC power supply to "Pin18" - not included
HDMI pin18 is + 5VDC from the HDMI source.
Emulates screens information
Max resolution: 1920 x 1080, 2048 x 1152
With Pass Through HDMI (F) and HDMI (F)
5V DC (via USB)
Dimensions 22 x 51 x 80 mm
Active HDMI Extender to mount between 2 pcs. HDMI cable
Transfer HDMI signal up to 40 meters.
Max length HDMI cable is 20m.
Powered from the HDMI source (5VDC in the plug)
