DANBIT A / S has a large selection of standalone access control blah. Iris scanner, finger scanner and other accessories for ADK and monitoring.
Personal access, traffic through locks, bollards number plate recognition, etc. Here is a small selection of what we offer.
Other solutions and options can be offered. Contact our sales department.
Atomic clock solutions that synchronize servers and resemble the Frankfurt transmitter that has a range of 2000km.
GPS time receiver for exact time on servers.
Tampering Alarm, Object Counting, Intrusion Detection, Alarm Detection
Advanced Motion Detection (5 areas)
5MP/3MP@ 30 fps, 2MP@60fps
Resolution: 2592 x 1944
IR distance 35m
IP66 Weatherproof
-20°C to 55°C
PoE 8.3W max.
Micro SDHC support up to 64GB
ONVIF
4 x Digital inputs NC/NO Type
4 x Analog inputs. 12 bit resolution
0-5V, 4-20mA or 0-20mA
4 x Relay outputs 5A/30VDC, 5A/250VAC
Up to 10 alarm receivers
1 x USB port for setup
GSM 3G 4G mobile network
9-36VDC (12V / 300mA)
Backup Battery 3.7V 1200mAh
Operating temperature -10- + 70 ° C
Customized SMS Alarm messages
APP for iOS and Android
Delivered WITHOUT SIM CARD
Accessories for DOOR-MAGNET-MI
angle fittings for outward door (outswing)
The kit consists of 1 part
heavy aluminum profile
Dim: See drawing
Accessories for DOOR-MAGNET-LOCK6
Angle bracket for outswing door
The set consists of 1 part
Strong aluminum profile
Dimensions: See drawing
Accessories for DOOR-MAGNET-LOCK
angle fittings for outward door (outswing)
The kit consists of 1 part
heavy aluminum profile
Dim: See drawing
Accessories for DOOR-MAGNET-LOCK6
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing
Accessories for DOOR-MAGNET+
angle bracket for outward door (outswing)
The kit consists of 1 part
heavy aluminum profile
target: See drawing
Accessories for DOOR-MAGNET+
z-angle fittings for inward door (Inswing)
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing
Accessories for door-magnet-mi
z-angle brackets for inward door (Inswing)
The kit consists of 3 parts
heavy aluminum profiles
target: See drawing
Miniature electronic holding magnet for cabinets
Supply voltage 12 VDC, minimum 140mA
Holding force: Up to 36 kg
with Bond sensor - Relay output COM, NC
Bond sensor is a closed indicator - Can inform the controller
Operating temperature: -10 ~ 55ºC
IP65 Stainless steel with epoxy filling
Magnet dimensions: 70 x 38 x 26 mm
Holding plate dimensions: 80 x 32 x 18.5 mm
Weight 350 g
Angled bracket for the door-magnet-yx35 types.
for attaching the holdemagnet.
1 part of extruded aluminum
Screws included
Dim: 265 x 73 x 45 mm
anodized
Angled bracket for the door-magnet-yx35 types.
for attaching the holdemagnet.
1 part of extruded aluminum
screws included
target: 260 x 55 x 33 mm
anodized
Mounting bracket for Door-Magnet-Yx28 types.
for inward doors.
2 parts of extruded aluminum
Screws included
target: 250 x 49 x 30 mm and 180 x 50 x 50 mm
anodized
Holding power Up to 500 kg
Dim: 282 x 74.8 x 38.8 mm
Face plate: 185 x 60 x 13.2 mm
Voltage: 12VDC / 24VDC
Power consumption: 12V / 420MA / 24V / 210mA
Signal output NO / NC / COM Lock Status Relay output
LED Red Indicates that the door is unlocked, green indicates that the door is locked
Buzzer - Summer 5/10/20/30 SEK
Suitable For wooden door, glass door, metal door, fireproof door
Surface temp: + 20 ℃
Operating temperature -20 - + 55 ℃
Humidity 0 ~ 95% (non-condensing) Surfaces: House anodized aluminum
Surfaces Magnet: Zinc
Surface plate: zinc
Weight 4.5 kg
Lock force Up to 350 kg
Dim: 260 x 58 x 30 mm
Face plate: 190 x 45 x 13 mm
Voltage: 12VDC / 24VDC
Power consumption: 12V / 500mA / 24V / 250MA
Signal Output NO / NC / COM Lock Status Relay Output
Timer (Delay): 3 / 6 / 9 seconds
Good for wooden door, glass door, metal door, fireproof door
Surface temp: +20℃
Operating temperature -20 - +55℃
humidity 0 ~ 95% (non-condensing)
Surfaces: House Anodized Aluminum
Surfaces Magnet: Zinc
Surfaces Face Plate: Zinc
Weight: 2.7 kg
Cabinet lock - 150kg. Locked with voltage
Voltage: 12VDC / 180MA
Holding force: 150kg
Size: 50 x 31 x 27 mm
Weight: 0.18kg
Cabinet lock - 150kg. Locked without voltage
trigger voltage: 12VDC / 180MA
Holding force: 150kg
Size: 50 x 31 x 27 mm
Weight: 0.18kg
ABS plastic house for Exit button
target: 38.5 x 38.5 x 48 mm
Center hole: 20 mm
4 x mounting holes for attachment
rubber gasket included
13.56MHz Mifare RFID and QR code
Free SDK available
Power supply: DC 12V
Operating temperature: -20℃ ~ 70℃
Possible in 8 digits ID for time attendance recording.
High capacity with 8 digits card number.
Programmable Password 4 digits PIN for each person.
16*2 rows of LCD display with 8 digits for displaying year, month, day, week, time events counter.
For 19mm mounting hole
12VDC
IP65
NO/COM/NC
Momentary reset
Metal
The switch is for touch-free access.
Up to 15 cm activation distance (30 - 150mm)
Touchless EXIT switch with relay output
IR motion technology
Adjustable hold timer 1-60 seconds
Adjustable activation distance 3 - 15cm
With blue and green LED
Relay contacts for 12 - 28VDC, 2Amp
Robust ABS plastic front
Supply voltage: 12 - 24VDC
Dimensions: 86 x 86 x 10 mm
Optional aluminum back piece - see picture and Accessories
Output contact for access control with cunduct / breaking function
robust plastic house with steel Back plate
Contact: NO / NC / COM
Momentary Contact press
Contact: Max 3A
Size: 86 x 86 x 42 mm
Passive Exit Button
Robust aluminum housing for EXIT button
Dimensions: 38.5 x 38.5 x 38 mm
Center hole: 20 mm
4 x mounting holes for attachment
3 mm extruded alu
Polished surface
Electric lock box for single / double acting swing doors
Smal frames - 25 mm Front plate
Brushed stainless steel
272 kg Pressure strength
Latch Status Output: 1A / 125VAC
Supply voltage: 12VDC 280MA / 24VDC 180MA
Operating voltage: 12 - 24VAC / DC
Operating cycle: 250,000 (factory tested)
Size: 24 x 160 mm House, 25 x 210 mm Front plate
Pole plate: 28 x 210 x 2 mm
Electronic door magnet with team power up to 272kg
Gen-Close timer Adjustable from 1 - 80 sec.
Door Closed Sensor - Relay output
Aluminum with epoxy at coil
12VDC or 24VDC, 6Watt
Switching between 12 and 24VDC
No holding power at Voltageless
Magnet: 250 x 42 x 26 mm
Door plate: 185 x 38 x 12 mm
Mounting plate: 250 x 25 x 5 mm
Anti magnetic function
Operating temperature: -10 - + 55ºC
Electronic door magnet with team power up to 272kg
Gen-Close timer Adjustable from 1 - 80 sec.
Door Closed Sensor - Relay output
Aluminum with epoxy at coil
12VDC or 24VDC, 6Watt
Switching between 12 and 24VDC
No holding power at Voltageless
Magnet: 250 x 42 x 26 mm
Door plate: 185 x 38 x 12 mm
Mounting plate: 250 x 25 x 5 mm
Anti magnetic function
Operating temperature: -10 - +55ºC
Door Phone 720p camera
Up to 99 apartments
Resident access via PIN code or RFID tag
Supports calls to mobile phone via SIP
Outdoor unit is IP65 close
Modules for additional apartments available separately (contact our sales department)
Power supply Outdoor unit: 12VDC or PoE, Family unit: 12VDC
App for Android and IOS allows residents to let guests in from the phone
Infrared light barrier
Up to 7 meters between the IR emitter and reflector
transmitter is powered. Passive round reflective piece
Power supply: 12-24 V DC / AC (not included)
Relay: max 36V 1A
Terminal: DC input Relay output: COM, NO (normally open contact)
Temperature: -20 ~ +60°C
Dimensions: 40 x 35 x 100 mm (W x D x H)
Bluetooth BLE 4.2 (low energy)
Up to 200 users
With user rights
Up to 1000 event logs in memory
Access with RFID chip (EM, 125kHz)
With LED indicator
APP for iPhone and Android
APP is Easiprox
Range adjustable from 0 to 20 meters
Can be set to open by pressing in the APP or automatically when you are within range
With solid state relay - no wear and tear
Adjustable re-lock time 1 - 1800 seconds
3 lock mode: Re-lock, always open, always locked.
Vandal alarm
Supply voltage: 12VDC
Dimensions: 120 x 76 x 21 mm
Bluetooth BLE 4.2 (Low Energy)
Up to 200 user
With user rights
Up to 1000 event logs in memory
access with RFID tag (EM, 125kHz)
access by PIN code (4-8 digits)
with keypad backlighting
app for the iPhone and Android
Range up to 50 meters
Can be set to open at pressures in the APP or automatically once inside the selected range
With solid state relay - no wear
With vandal alarm
Supply voltage: 12 to 24VDC
Dimensions: 152 x 45 x 23 mm
IR safety sensor for automatic doors prevent property damage and personal injury
Mounted above the frame or on the door
Relay output connected dørautomatikstyringen
Length: 360 mm | IR beam adjustment: 5-25 °
6 measuring points
detector distance: 0 to 2.5 meters
Max. installation height: 2.6 meters
Relay Output is continuously active when the thing or person is detected
Dimensions: 360 x 45 x 45 mm
Weight: 350g
Supply voltage: 12 - 24VDC or 12 - 24VAC
IP54
EU standard: EN16005
Door machine with switch-box for swing-door
Supplied switch box for function selection
With connection for access control
With connection for NON-TOUCH access switches
Connection for emergency battery
Approved according to EN 61000 standards for safety
Supply voltage: 100 - 240VAC
Built-in motor: 60VDC, 2Amp
Power consumption: approx. 77 Watt
Connection for 24VDC backup battery
Dimensions: 125 x 79 x 34 mm
Door opening angle 80 - 120 °
Door width: 750 - 1200 mm
Door height: 2800 mm
Door weight: 50 - 150 kg
230VAC
The switch is for touch-free access.
Up to 10 cm activation distance (10 - 100mm)
Touchless EXIT switch with relay output
Relay timer: 0.5 second
IR motion technology
Adjustable activation distance
With blue and green LED
Relay contacts for 12 - 28VDC, 3Amp
Stainless steel front plate
Supply voltage: 12VDC
Dimensions: 86 x 86 mm
Access is controlled by Smartphones via BT
Equipped with call button to request access
United pushbutton with light
Built in sounder
Up to 1000 users
Different user rights
3 functions: access with BT APP, access via query Exit
one administrator
BT: BLE4.2 (Low Energy)
BT range: up to 50 meters, depending on conditions
Compatibility: Android 5.0 and up, iOS9.0 and up
relay contact: NO / COM / NC (switching relay)
Supply voltage: 12 to 24VDC 1A
Operating temperature: -20 - + 70 ° C
Dimensions: 86 x 86 x 38 mm | material: plastic housing
All Weather Exit contact
cast aluminum housing with sturdy green button
contact DPDT (NO / NC / COM)
Monentary contact 250VAC / 3A and 125VAC / 6A
Can withstand heavy weather and extreme environments.
Ideal for doors and gates
Dimensions: W 90 x H 85 x D 58 mm
Accessories for Door-Magnet-V12
Mounting the Hold Magnet on side of Karm
mounting door plate If this is necessary
for outward door (outswing)
Heavy Aluminum profile
Dim: L 220 x D 70 x B 45 mm
accessories DOOR-MAGNET-DUAL12
Mounting brackets for inward double-doors (inswing)
set contains 5 parts
Strong aluminum profiles
Measurements: The magnetic angle: 534 x 76 x 48 mm. Die-plate angles: 190 x 64 x 64 mm
Electronic door magnet for double-doors, folding door etc.
Holding force up to 544 kg for each door
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Automatic change-over between 12 and 24 VDC
No holding force when not energized
Operating temperature: -10 - 55 ° C
Humidity: 0-95% non-condensing
Double magnet: 534 x 68 x 40 mm
Door plates: 185 x 61 x 16 mm | Double-mounting plate: 534 x 40 x 8 mm | weight: ca. 6.5 kg
Electronic door magnet for double-doors, folding door etc.
Holding force up to 364 kg for each door
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, minimum 2 x 6Watt
Automatic change-over between 12 and 24 VDC
No holding force when not energized
Operating temperature: -10 - 55 ° C
Humidity: 0-95% non-condensing
Double magnet: 530 x 49 x 29 mm
Door plates: 185 x 45 x 14 mm
Double-mounting plate: 530 x 29 x 5.5 mm
Weight: ca. 5.6 kg
Designed for face mount on in-swing doors or gates
Operating Temperature: -10 - 55ºC
Armature Plate: 185, 45, 14 mm.
Magnet: 203, 43, 40 mm.
Spike and surge protection.
Holding force up to 272 Kg.
Dual voltage 12 or 24 VDC.
Anti-residual magnetism.
High reliability.
Weight: 3.0 Kg.
door magnet with clamping force up to 272kg
Aluminum housing and vandal proof
Supply voltage for team: 12VDC or 24VDC, 0.5A / 0,25A
Automatic switching between 12 and 24VDC
No holding power at any voltage
Operating temperature: -10 to + 55°C
Magnetic: 250 x 44 x 26 mm
Door-plate: 185 x 38 x 12 mm
Mounting plate for the frame: 250 x 26 x 5.5 mm
Anti magnetic function
door magnet with clamping force up to 545kg
Rusrfri steel cabinet full sealed with epoxy and is vandal proof
Equipped with thread for flexible tube to protect the cable
Supply voltage for team: 12VDC or 24VDC, 6Watt
Cable change-over between 12 and 24 VDC
Only holding force when energized
With Bond Sensor (Lock indicator)
Operating temperature: -10 to + 55°C
Magnetic: 220 x 62 x 41 mm
Door-plate: 185 x 61 x 16 mm
Anti-magnetic feature
Weight: ca. 5 kg
The door magnet with holding force up to 136 kg
stainless steel housing full sealed with epoxy
Voltage for holding: 12VDC 6 Watt
No holding force at voltageless
Operating temperature: -10 to +55°C
Magnet: 170 x 32 x 24 mm
Amaturple plate: 152 x 32 x 10 mm
Anti magnetic function
Weight: Approx. 2.5 kg
21.5 "Infostander 1080x1920
Touch Screen
Spritdispenser 4 liters
Low Level Sprit
Adjustable amount of Sprit
Android Based
Wall bracket or foot can be purchased (not included)
Can be used with the Danbit program "Hi Customer"
and for monitoring the number of visitors in store
Call for prices!
Electronic Mini Lock
12VDC / 1A
Goal: 80 x 65 x 14 mm
Weight: 260g
Hold voltage - 12VDC
Holding Force: 150kg
Dimensions: 64.1 x 40 x 25 mm | Weight: 0.18kg
Waterproof and sunscreens
black | Material: ABS plastic
Dimensions: 15cm x 10.4cm x 9cm
Simple to install and good quality
BEMÆRK: Kontrakt med DANBIT A/S og Brugeraftale med serviceleverandør SKAL etableres før køb!
Betalingssystem med touch display.
All-in-one med POS og Data-kommunikation i samme hus
Accepterer kontaktløse kort og MobilePay.
GSM antennestik MMCX stik
6 digitale OC. pulsudgange til automat/vendingmaskine, maskiner, døre etc.
6 digitale indgange, inhibit, for at stoppe køb ved mangel/fejl
Konfigureres via platform med priser og funktioner
Kan tilkobles en salgsautomat, vaskemaskine, dør, osv
Web-baseret eller MQTT Cloud
Kommunikation: LAN eller 4G
Support til opsætning kan tilkøbes.
Leveres med SIM kort klar til funktioneopsætning
Forsyningsspænding: 10-24VDC, 10-42VAC / 2A (PSU medfølger ikke)
Outdoor RFID reader 125kHz EM 13.56 Hz
MIFARE, MIFARE Plus, DESFire / EV1 Felica
IP65, IP67
Vandal safe IK08
Supporter up to 200,000 users
1 GHz CPU to 4 GB flash + 64MB RAM
Multi buzzer
Driftstempereatur: -35 - 65 C
Weight: 144g
Dimensions: 48 x 145 x 27 mm | RS-485 Master or slave
10/100 Mbps ethernet
1 x Relay
PoE
Supply voltage: 12V DC
Compact Access Control for Mifare RFID
40mm in diameter, 30.2mm long
Thread is 28 mm
Can hold up to 1000 Mifare TAGs/cards
Relay output COM, NO, NC (changeover switch)
Adjustable hold timer - (potmeter) 0.5 - 100 sec.
Users are created with "master card"
Users are removed with "master card"
No software, no PC or terminal
3 different LED colors
Makes sound when programming
IP54 sealed front
Supply voltage: 12VDC / 70mA
No physical interface
